Inverter function 90SP36
|
06-30-2008, 08:03
Post: #7
|
|||
|
|||
Inverter function 90SP36
In addition to the Chuck W. tip , Some of these inverters also need
a load to get started, So turn someting "ON" then fire up the Inverter. Bill 88 FC Michigan --- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor" > > ChuckW, that is a great diagnostic. When I read ChuckH's question, I > could not even think of a link. > > You dont have to have smarts, just smart friends. > GregoryO'Connor > 94pt > > > --- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler" > > > > > Chuck, > > Inverters also require more current to start than when running. > Most of > > the better ones have a circuit that prevents the inverter from > running the > > batteries two low. If the resting terminal voltage of the > batteries is OK > > connect a voltmeter across the input to the inverter and watch it > as you > > turn the inverter on. If you see a significant drop in voltage > you probably > > have a poor connection between the inverter and the battery and > this is > > causing the inverter to shutdown. The alternator is providing > just enough > > extra oomph to get past the starting current. If you have > separate > > starting batteries and the house batteries are old check the > terminal > > voltage when the inverter is turned on. If you see a drop at the > terminals > > it is time for new batteries if all the connections are in good > condition. > > If you have a infrared heat sensor point it at the battery > terminals. If > > they are warmer that the surrounding battery you have a poor > battery > > connection. > > > > - Chuck Wheeler- > > FC 31SB Fort Worth TX > > > > > > _____ > > > > From: WanderlodgeForum@yahoogroups.com > > [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of > williamcharrison > > Sent: Monday, June 30, 2008 9:01 AM > > To: WanderlodgeForum@yahoogroups.com > > Subject: [WanderlodgeForum] Inverter function 90SP36 > > > > > > > > The inverter on my coach will not kick in unless I start > > the engine momentarily (I have previously reset it). After > > starting the engine I can turn it off and the inverter stays on. > > > > Chuck Harrison > > Akron, Ohio > > 90 SP36 > > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Inverter function 90SP36 - krminyl@... - 09-28-2006, 06:01
Inverter function 90SP36 - williamcharrison - 09-28-2006, 08:22
Inverter function 90SP36 - Henry Jay Hannigan - 09-28-2006, 11:00
Inverter function 90SP36 - williamcharrison - 06-30-2008, 02:00
Inverter function 90SP36 - Chuck Wheeler - 06-30-2008, 04:14
Inverter function 90SP36 - Gregory OConnor - 06-30-2008, 07:19
Inverter function 90SP36 - pattypape - 06-30-2008 08:03
Inverter function 90SP36 - Chuck Wheeler - 06-30-2008, 13:00
Inverter function 90SP36 - Donald Spithaler - 06-30-2008, 13:47
Inverter function 90SP36 - Henry Jay Hannigan - 07-01-2008, 03:30
Inverter function 90SP36 - Henry Jay Hannigan - 07-01-2008, 03:30
Inverter function 90SP36 - williamcharrison - 07-01-2008, 03:47
|
User(s) browsing this thread: 1 Guest(s)