Inverter function 90SP36
|
06-30-2008, 13:00
Post: #8
|
|||
|
|||
Inverter function 90SP36
Thanks Greg! I learned early with our bird that I seemed to overlook the simple solutions sure that the problem had to be something beyond my capabilities. Most of the time they really are simple.
- Chuck Wheeler-
FC 31SB Fort Worth TX
From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Gregory OConnor Sent: Monday, June 30, 2008 2:19 PM To: WanderlodgeForum@yahoogroups.com Subject: [WanderlodgeForum] Re: Inverter function 90SP36 ChuckW, that is a great diagnostic. When I read ChuckH's question, I could not even think of a link. You dont have to have smarts, just smart friends. GregoryO'Connor 94pt --- In "WanderlodgeForum%40yahoogroups.com", "Chuck Wheeler" > > Chuck, > Inverters also require more current to start than when running. Most of > the better ones have a circuit that prevents the inverter from running the > batteries two low. If the resting terminal voltage of the batteries is OK > connect a voltmeter across the input to the inverter and watch it as you > turn the inverter on. If you see a significant drop in voltage you probably > have a poor connection between the inverter and the battery and this is > causing the inverter to shutdown. The alternator is providing just enough > extra oomph to get past the starting current. If you have separate > starting batteries and the house batteries are old check the terminal > voltage when the inverter is turned on. If you see a drop at the terminals > it is time for new batteries if all the connections are in good condition. > If you have a infrared heat sensor point it at the battery terminals. If > they are warmer that the surrounding battery you have a poor battery > connection. > > - Chuck Wheeler- > FC 31SB Fort Worth TX > > > _____ > > From: "WanderlodgeForum%40yahoogroups.com" > [mailto:"WanderlodgeForum%40yahoogroups.com"] On Behalf Of williamcharrison > Sent: Monday, June 30, 2008 9:01 AM > To: "WanderlodgeForum%40yahoogroups.com" > Subject: [WanderlodgeForum] Inverter function 90SP36 > > > > The inverter on my coach will not kick in unless I start > the engine momentarily (I have previously reset it). After > starting the engine I can turn it off and the inverter stays on. > > Chuck Harrison > Akron, Ohio > 90 SP36 > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Inverter function 90SP36 - krminyl@... - 09-28-2006, 06:01
Inverter function 90SP36 - williamcharrison - 09-28-2006, 08:22
Inverter function 90SP36 - Henry Jay Hannigan - 09-28-2006, 11:00
Inverter function 90SP36 - williamcharrison - 06-30-2008, 02:00
Inverter function 90SP36 - Chuck Wheeler - 06-30-2008, 04:14
Inverter function 90SP36 - Gregory OConnor - 06-30-2008, 07:19
Inverter function 90SP36 - pattypape - 06-30-2008, 08:03
Inverter function 90SP36 - Chuck Wheeler - 06-30-2008 13:00
Inverter function 90SP36 - Donald Spithaler - 06-30-2008, 13:47
Inverter function 90SP36 - Henry Jay Hannigan - 07-01-2008, 03:30
Inverter function 90SP36 - Henry Jay Hannigan - 07-01-2008, 03:30
Inverter function 90SP36 - williamcharrison - 07-01-2008, 03:47
|
User(s) browsing this thread: 1 Guest(s)