Screen Door Closer Pulleys Needed

[dthollis1961]

Thanks everyone for ideas. I picked up a door roller the other day
that has a bearing in it, it's larger diameter though. I looked
really hard at brass cabinet door knobs...most of them have about the
same size pulley built into them.

David Hollis 84FC35 Springfield,IL


--- In WanderlodgeForum@yahoogroups.com, "Richard Hayden"
wrote:
>
> When we had the '81FC, I rebuilt the spring thing with bungee
cord. Getting the right length was a little tricky but it worked
good. Naturally, bigger wheels are needed.
>
> Dick Hayden - '87 PT 38 - Lake Stevens, WA
> ----- Original Message -----
> From: pattypape
> To:
WanderlodgeForum@yahoogroups.com om>
> Sent: Saturday, January 12, 2008 5:07 PM
> Subject: [WanderlodgeForum] Re: Screen Door Closer Pulleys Needed
>
>
>
>
> IF and when you find the pulley wheels , Try using blind cord,
> instead of steel cable, the cable chews up the little wheels.
>
> Bill 88 FC Michigan
>
> --- In
WanderlodgeForum@yahoogroups.com om>, "dthollis1961"
> wrote:
> >
> > The screen door in my 84FC is closed with a spring loaded cable
that
> > runs through 2 small pulleys. The pulleys are small...about
3/4" or
> > maybe 1/2" diameter. One pulley is worn through, so I need to
come
> up
> > with a replacement. Where would I find one?
> >
> > David Hollis 84FC35 Springfield,IL
> >
>