'85FC31 Security Light issue... need help!

[Gregory OConnor]

Jim, if James could use dash switches to turn on all the security
light appliances that the security switch is designed to glow (at
the same time), the 12v power loss is a result of only the
securityswitch. allmost sounds like the relay lines are triggering
the AT or a normaly open solenoid.

Is there a switch, relay or solenoid in the 85 that duplicates the
resulting condition as a function of that switch??? like a marine
battery switch. DickH has knowledge of the phantom load solenoids
that may be worth checking????

GregoryO'Connor
94ptRomolandCa


--- In WanderlodgeForum@yahoogroups.com, "scoggins_jim"
<scoggins.j@...> wrote:
>
>
> James,
> Are you plugged in when you do this? Or not? What is the battery
> voltage when this is happening. Sorta thinking along the lines of
> pattypape could it be that your batteries are low/bad?
>
> Regards,
> Jim
>