Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
It's only 30 years old!
06-24-2008, 12:31
Post: #4
It's only 30 years old!

Michael,
There is a sending unit driven from the camshaft. Most Tachs are adjustable, in fact that adjustment is usually where I find the problems. I have the dash out of our BB right now doing some other work so I will look at the tach tomorrow and see how it is set. I got a replacement sending unit from Teleflex a few years ago and it worked with our existing tach so I am sure that they make a tach that will work with it. If you have a oscilloscope or a digital meter that will display frequency you can use it to check the sending unit by connecting it to the signal leads at the tach location.
- Chuck Wheeler-
FC 31SB Fort Worth TX


From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Michael
Sent: Tuesday, June 24, 2008 12:18 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: It's only 30 years old!



Thanx for the advice Chuck. However, I have an empty hole in the
dash so I'm not sure what happened to the original? When I look at
the marine tachs they are mentioning "number of poles". Any idea how
our sending units are setup on the 3208's?
Michael

--- In "WanderlodgeForum%40yahoogroups.com", "Chuck Wheeler"
.> wrote:
>
> Mike,
> I you like to tinker I have repaired two BB tachometers. Both
suffered from
> fractured solder connections around the area where the jumpers are
located
> to set the pulse rate. If you want to replace it look in a good
marine
> store. They have tachometers for diesels that have lower rpm
ranges. Most
> of the tachometers around come from Teleflex who also made a lot of
the
> original BB gauges.
>
> - Chuck Wheeler-
> FC 31SB Fort Worth TX
>
>
> _____
>
> From: "WanderlodgeForum%40yahoogroups.com"
> [mailto:"WanderlodgeForum%40yahoogroups.com"] On Behalf Of Michael
> Sent: Monday, June 23, 2008 11:25 PM
> To: "WanderlodgeForum%40yahoogroups.com"
> Subject: [WanderlodgeForum] It's only 30 years old!
>
>
>
> Stopped by our local Bluebird distributor here in Phoenix to pick
up a
> new Tach for my dash. They informed me the tach was no longer
> available for a 1978 Bluebird. I asked when they stopped using this
> tach and he said in the late 80's. So that's only 20 years old.
You'd
> think if they're going to build a bus to last over 50 years they'd
> think about supporting them for more than 20? Bet I could get a
dash
> part for my 20 year old car??? So what do you do now, After market?
>
> Michael Putz
> 78FC35 "Putz'n Around"
> Mesa, Arizona
>

Quote this message in a reply
Post Reply 


Messages In This Thread
It's only 30 years old! - Michael - 06-23-2008, 16:24
It's only 30 years old! - Chuck Wheeler - 06-24-2008, 01:37
It's only 30 years old! - Michael - 06-24-2008, 05:18
It's only 30 years old! - Chuck Wheeler - 06-24-2008 12:31



User(s) browsing this thread: 1 Guest(s)