HWH jack wont extend, 94pt

[Hisham Amaral]

Greg You may to try turning your ignition switch off then on. Your system must have excessive slope that shows on you control panel. I had the same problem at Oshkosh last week, I called HWH and was told to do that, it worked. Hisham --- On Thu, 8/7/08, David Brady wrote: From: David Brady Subject: Re: [WanderlodgeForum] HWH jack wont extend, 94pt To: WanderlodgeForum@yahoogroups.com Date: Thursday, August 7, 2008, 12:37 AM Greg, I 've always wondered how these radiators come out. Do they slide out from the rear? How much of the body work needs to be removed? What do you think that beast weighs? David Brady '02 LXi, Ca -----Original Message----- From: Gregory OConnor Sent: Aug 5, 2008 9:06 PM To: WanderlodgeForum@ yahoogroups. com Subject: [WanderlodgeForum] HWH jack wont extend, 94pt I was preping my bus for radiator removal/rodding and new compressor cooling lines today and I jacked the jack. I attempted to lift the back end using two 8x8 timbers under the jack pads to gain some height for frame jacksstands. the drivers side timber abruptly rolled a bit in the gravel so I decided to drop the bus and use wider blocks under the pads. the jacks retracted and I was never able to get the drive/rear jack to extend once again? The 94 hwh control pad only allow you to choose a pair of jacks or auto level ;Both front ;both back ;both left ;both right or auto level. I tried every combination to extend Drive/rear jack, no luck. I wonder if I Knocked a sensor loose on the jack or confused the hwh computer? GregoryO'Connor 94ptRomolandCa