New problem,,,,lost one of my Freedom Inverters

[thewrench1963]

I have a Heart Interface Freedom 20 which would be similar to your Freedom 25.
What I found in the manual is there should be a fuse inline on the positive
cable to the batteries. The recommendation on the Freedom 20 is a 300 amp fuse
within 18 inches of the batteries. There are also 2 circuit breakers on the
front of the unit. The 20 amp protects the inverter from overloads and the 30
amp is on the AC input. There is a fast acting electronic circuit protection
that will protect the circuits from extreme overloads. To reset you must corrct
the fault and cycle the power switch off/on.

The power switching on the Heart unit is all automatic when you plug into AC
power. If you turn off the power switch on the front of the unit while plugged
into AC it will turn off the battery charger but AC power will still be
available at the output.

If you have the optional remote control panel there are other settings available
which may be the cause of the unit not working. If you do have the remote
control panel there should be status LEDs which can be used to troubleshoot the
problem.

I hope this helps and if you need any more information out of the Heart owners
manual let me know.

Kevin Ridley
79 35' FC XV
Spokane WA
>