sen solenoid & step solenoid

[Vaughn Paul]

Hi.

I am trying to source a couple of items.

1. The electric solenod that controls the air to the entry steps

2. The hydraulic solenod that controls the gen in/ot

This is for a 1982 PT40. I have seen some of the old posts, about
Grainger etc. but I am trying to make certain that these apply to my
coach before I call BB parts.

Thanks a bunch for any assistance.

V. Paul
1982 PT40

[pattypape]

I have been working on my air step also.
There is a good write up on these parts posted on the Vintage
Birds.com site. It seems that Grainger, & ARO, may have a valve.
My original valve was made by ISI Fluid Power Inc. I think they are
out of business.
The air cylinder is at Clippard.com Go to this site and find a
distributor near your area. The air valve is a common item, Take
your valve to the Clippard dealer. They can match it up to a
replacement.
I took mine valve apart, cleaned and lubricated it. I don't know if
this was a successful repair. I am waiting for a repair Kit for the
Clippard cylinder. It was leaking air at the shaft. Steps are still
disassembled.
Hope this helps,

Bill 88FC Michigan


-- In WanderlodgeForum@yahoogroups.com, "Vaughn Paul"
wrote:
> Hi.
>
> I am trying to source a couple of items.
>
> 1. The electric solenod that controls the air to the entry steps
>
> 2. The hydraulic solenod that controls the gen in/ot
>
> This is for a 1982 PT40. I have seen some of the old posts, about
> Grainger etc. but I am trying to make certain that these apply to
my
> coach before I call BB parts.
>
> Thanks a bunch for any assistance.
>
> V. Paul
> 1982 PT40

[Vaughn Paul]

Thank you for the reply. I have copies of the Vintage Bird posts, but
I am not certain the system is the same on the PT40.

I see that on my unit the gen door is hydraulic.

I will check it out closer



--- In WanderlodgeForum@yahoogroups.com, "pattypape"
wrote:
> I have been working on my air step also.
> There is a good write up on these parts posted on the Vintage
> Birds.com site. It seems that Grainger, & ARO, may have a valve.
> My original valve was made by ISI Fluid Power Inc. I think they
are
> out of business.
> The air cylinder is at Clippard.com Go to this site and find a
> distributor near your area. The air valve is a common item, Take
> your valve to the Clippard dealer. They can match it up to a
> replacement.
> I took mine valve apart, cleaned and lubricated it. I don't know
if
> this was a successful repair. I am waiting for a repair Kit for
the
> Clippard cylinder. It was leaking air at the shaft. Steps are still
> disassembled.
> Hope this helps,
>
> Bill 88FC Michigan
>
>
> -- In WanderlodgeForum@yahoogroups.com, "Vaughn Paul"
> wrote:
> > Hi.
> >
> > I am trying to source a couple of items.
> >
> > 1. The electric solenod that controls the air to the entry steps
> >
> > 2. The hydraulic solenod that controls the gen in/ot
> >
> > This is for a 1982 PT40. I have seen some of the old posts, about
> > Grainger etc. but I am trying to make certain that these apply to
> my
> > coach before I call BB parts.
> >
> > Thanks a bunch for any assistance.
> >
> > V. Paul
> > 1982 PT40

[Mike Hohnstein]

Got my new step control from Randy Dupree, works perfect.
He's on the tech and ALL sites.
Mike Hohnstein
Germantown, WI
----- Original Message -----
From: Vaughn Paul
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, April 29, 2005 5:11 PM
Subject: [WanderlodgeForum] sen solenoid & step solenoid


Hi.

I am trying to source a couple of items.

1. The electric solenod that controls the air to the entry steps

2. The hydraulic solenod that controls the gen in/ot

This is for a 1982 PT40. I have seen some of the old posts, about
Grainger etc. but I am trying to make certain that these apply to my
coach before I call BB parts.

Thanks a bunch for any assistance.

V. Paul
1982 PT40





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

[mbulriss]

Mike-

Randy is on this WanderlodgeForum also.

Mike Bulriss

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@w...> wrote:
> Got my new step control from Randy Dupree, works perfect.
> He's on the tech and ALL sites.
> Mike Hohnstein
> Germantown, WI
> ----- Original Message -----
> From: Vaughn Paul
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, April 29, 2005 5:11 PM
> Subject: [WanderlodgeForum] sen solenoid & step solenoid
>
>
> Hi.
>
> I am trying to source a couple of items.
>
> 1. The electric solenod that controls the air to the entry steps
>
> 2. The hydraulic solenod that controls the gen in/ot
>
> This is for a 1982 PT40. I have seen some of the old posts, about
> Grainger etc. but I am trying to make certain that these apply to my
> coach before I call BB parts.
>
> Thanks a bunch for any assistance.
>
> V. Paul
> 1982 PT40
>
>
>
>
>
>
------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]

[randydupree]

i have the air sol.in stock...randy dupree, dupree products 352 495 9459
----- Original Message -----
From: Vaughn Paul
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, April 29, 2005 6:11 PM
Subject: [WanderlodgeForum] sen solenoid & step solenoid


Hi.

I am trying to source a couple of items.

1. The electric solenod that controls the air to the entry steps

2. The hydraulic solenod that controls the gen in/ot

This is for a 1982 PT40. I have seen some of the old posts, about
Grainger etc. but I am trying to make certain that these apply to my
coach before I call BB parts.

Thanks a bunch for any assistance.

V. Paul
1982 PT40





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]