BB Clock Reproductions
|
05-22-2007, 05:31
Post: #1
|
|||
|
|||
BB Clock Reproductions
I may be up doing a Bluebird Clock project. I have no idea what they
would cost at this time. I'd need to do my homework first. At this time I'd like to hear from those that would be interested in purchasing a reproduction. So If you are interested please let me know. If there is interest I'll start investigating material costs, etc. and come up with a price. Might be able to make them out of various materials too. -- Curt Sprenger 1987 PT38 8V92 "MacAttack Racing" Anaheim Hills, Calif. |
|||
05-22-2007, 12:29
Post: #2
|
|||
|
|||
BB Clock Reproductions
The clock in my '81 is walnut. Scott Bishop (who I thought might have weighted
in) and I looked at the feasibility of making them, and here is what I (we) came up with. I ran it by OB, the cabinet making I studied under at the wood shop on the AFB and here are the things we came up with. 2" walnut, if you can get it is moderately expensive and cannot be had everywhere. To cut that thick of a piece of walnut, you will need a GOOD band saw. In my limited experience of cutting anything with a band saw, you leave "saw marks" on the edge of the wood. These will either have to be 1) filed or 2) sanded, preferably both. If you don't have a ridgid up and down sander, this is going to be time consuming to do by hand. Trust me, walnut is not like sanding pine. All 'n all, we figured materials wise, one could be made for about $50.00. That is provided you have all the right equipment. However, labor wise, I didn't think I wanted to get involved in "mass producing" them. Too labor intensive. It would be a good hobby item to make one or two, but I don't think I could make a living making them and selling them. BTW be sure to cut the outline 1/16th inch larger all the way around to allow for sanding. Keith, I apologize for NOT getting back to you and sending you a pattern. It has not been a fun year. Tom Meservey, USN (Ret) --------------------------------- Expecting? Get great news right away with email Auto-Check. Try the Yahoo! Mail Beta. [Non-text portions of this message have been removed] |
|||
05-22-2007, 14:04
Post: #3
|
|||
|
|||
BB Clock Reproductions
Tom,
I appreciate your input. Thank you. Curt Sprenger 1987 PT38 8V92 "MacAttack Racing" Anaheim Hills, Calif. |
|||
05-23-2007, 03:17
Post: #4
|
|||
|
|||
BB Clock Reproductions
You are absolutely right Tom. It would be very hard to find a piece
of walnut thick enough to do the job. I'm willing to bet the walnut used to make the existing original clocks was laminated. Back in the day I used to buy a lot of wood. I mean A LOT of wood for the U.S. Navy Submarine Base out there in Goose Creek? Cooper River... An industrial drum sander would make the job much easier but there will still be a lot of hand sanding to do. I'm surprised there were no takers on the acrylic idea? Once you have the acrylic blank you can make it any color you want, ghost flames and all... Keith 84FC35 --- In WanderlodgeForum@yahoogroups.com, Tom Meservey <snulli2@...> wrote: > > The clock in my '81 is walnut. Scott Bishop (who I thought might have weighted in) and I looked at the feasibility of making them, and here is what I (we) came up with. I ran it by OB, the cabinet making I studied under at the wood shop on the AFB and here are the things we came up with. 2" walnut, if you can get it is moderately expensive and cannot be had everywhere. To cut that thick of a piece of walnut, you will need a GOOD band saw. In my limited experience of cutting anything with a band saw, you leave "saw marks" on the edge of the wood. These will either have to be 1) filed or 2) sanded, preferably both. If you don't have a ridgid up and down sander, this is going to be time consuming to do by hand. Trust me, walnut is not like sanding pine. All 'n all, we figured materials wise, one could be made for about $50.00. That is provided you have all the right equipment. However, labor wise, I didn't think I wanted to get involved in "mass producing" them. Too > labor intensive. It would be a good hobby item to make one or two, but I don't think I could make a living making them and selling them. BTW be sure to cut the outline 1/16th inch larger all the way around to allow for sanding. > > Keith, I apologize for NOT getting back to you and sending you a pattern. It has not been a fun year. > > Tom Meservey, USN (Ret) > > > --------------------------------- > Expecting? Get great news right away with email Auto-Check. > Try the Yahoo! Mail Beta. > > [Non-text portions of this message have been removed] > |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)