Need new muffler DD Series 60
|
05-31-2008, 09:47
Post: #1
|
|||
|
|||
Need new muffler DD Series 60
Pete, I don't know of a source, but Ron Marabito purchased a muffler about 6 months ago. It IS a job and takes 2+ people. Or- a strong teenager. Bim Burt, Ron and myself struggled to get the new one aligned with the new flex piping. There is a lot more to it then just a quick removal. The muffler has supports inside the cavity that houses the muffler. Also, the flex pipe by the turbo has a sender located in the rear of that pipe. You can't see that from the rear. Tell the guys to go slow, lot's of items to be aware of.
Ernie Ekberg 83PT40 Livingston, Montana Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. |
|||
05-31-2008, 10:49
Post: #2
|
|||
|
|||
Need new muffler DD Series 60
Pete, keep us posted on your results.
Ernie Ekberg --no heaters running, today!!83PT40 Livingston, Montana Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. |
|||
05-31-2008, 13:12
Post: #3
|
|||
|
|||
Need new muffler DD Series 60
I have a 95 PT-42 with the DD Series 60 Engine.
The muffler is totally shot (and probably dangerous). CCW has been doing some work -- slow parts receipt has kept me here over the week end (bummer)... but they're doing a good job. I'm pleased, so far, with the service. Ran into a problem with the muffler. After making many calls, they could only find a source from Detroit Diesel on a "made to order" basis, with a 7 to 10 day delivery. (EEEK! I _really_ don't want to spend another two weeks sitting in their lot!) Does anyone know of a truck/heavy equipment muffler shop in the Los Angeles basin that can fabricate a muffler that would be a reasonable replacement for my coach? I would think that it's not that much of a tough job... the only thing I can see is that it has a bend in the pipe at the lower end to connect up.... Any ideas? BTW, be sure to inspect those mufflers. The end on mine allowed rain to flood down into the muffler -- couldn't have helped it ... and it developed a hole at the bottom end where the water likely pooled. Also, the top end seems to allow a puddle to form -- and that end is rusted through as well. Pete Masterson '95 Blue Bird Wanderlodge WBDA 42 aeonix1@... On the road at CCW in Riverside, CA |
|||
05-31-2008, 14:05
Post: #4
|
|||
|
|||
Need new muffler DD Series 60
Pete
There are plenty of truck parts suppliers over in the Colton Rialto Fontana Pomona area.
I don't know who is best any longer,but Colton Truck Parts was a leader in supply a few years ago.
Gregory is probably out somewhere,but I am sure he will help you when hechecks in.
Fred & Jeanne Hulse
Morristown Arizona 1997 Wanderlodge WLWB41 |
|||
05-31-2008, 14:35
Post: #5
|
|||
|
|||
Need new muffler DD Series 60
The CCW guys are pretty good. CCW has hired several folks with
significant RV experience and they're learning about Blue Birds very quickly. When they looked over the muffler installation, they went on the phone to Ft Valley to get info on the installation, so they have a pretty good idea what's required. The only problem is finding a replacement. Worst case, I'll have to have the new one shipped to my home, then take the bus and muffler to a shop in the Bay Area to have the work done. (I don't have 2 people nor do I have a strong teenager.) I can see that the installation will be tough to do... Pete Masterson '95 Blue Bird Wanderlodge WBDA 42 aeonix1@... On the road at CCW in Riverside On May 31, 2008, at 6:47 PM, erniecarpet@... wrote: > Pete, I don't know of a source, but Ron Marabito purchased a > muffler about 6 months ago. It IS a job and takes 2+ people. Or- a > strong teenager. Bim Burt, Ron and myself struggled to get the new > one aligned with the new flex piping. There is a lot more to it > then just a quick removal. The muffler has supports inside the > cavity that houses the muffler. Also, the flex pipe by the turbo > has a sender located in the rear of that pipe. You can't see that > from the rear. Tell the guys to go slow, lot's of items to be aware > of. > > Ernie Ekberg > 83PT40 > Livingston, Montana > > > > Get trade secrets for amazing burgers. Watch "Cooking with Tyler > Florence" on AOL Food. > |
|||
05-31-2008, 14:37
Post: #6
|
|||
|
|||
Need new muffler DD Series 60
Not sure how loud it would be. I doubt the noise would bother _me_ as
I'm plenty far from the source -- but CA is pretty picky about overly noisy vehicles and I'm quite likely to get pulled over with a straight pipe .... <sigh> Pete Masterson '95 Blue Bird Wanderlodge WBDA 42 aeonix1@... On the road at CCW in Riverside On May 31, 2008, at 7:58 PM, David Brady wrote: > Sorry, no help with muffler contacts. Is putting a straight > pipe on it acceptable? That's what I'd do to mine if I were > in your predicament. You could run it for a while, pending > the new muffler, or live with it if it's not too loud, which I > don't think it would be. > > David > '02 LXi, NC > > Pete Masterson wrote: >> >> I have a 95 PT-42 with the DD Series 60 Engine. >> >> The muffler is totally shot (and probably dangerous). CCW has been >> doing some work -- slow parts receipt has kept me here over the week >> end (bummer)... but they're doing a good job. I'm pleased, so far, >> with the service. >> >> Ran into a problem with the muffler. After making many calls, they >> could only find a source from Detroit Diesel on a "made to order" >> basis, with a 7 to 10 day delivery. (EEEK! I _really_ don't want to >> spend another two weeks sitting in their lot!) >> >> Does anyone know of a truck/heavy equipment muffler shop in the Los >> Angeles basin that can fabricate a muffler that would be a reasonable >> replacement for my coach? >> >> I would think that it's not that much of a tough job... the only >> thing I can see is that it has a bend in the pipe at the lower end to >> connect up.... >> >> Any ideas? >> >> BTW, be sure to inspect those mufflers. The end on mine allowed rain >> to flood down into the muffler -- couldn't have helped it ... and it >> developed a hole at the bottom end where the water likely pooled. >> Also, the top end seems to allow a puddle to form -- and that end is >> rusted through as well. >> >> Pete Masterson >> '95 Blue Bird Wanderlodge WBDA 42 >> aeonix1@... >> On the road at CCW in Riverside, CA >> >> No virus found in this incoming message. Checked by AVG. Version: >> 7.5.524 / Virus Database: 269.24.4/1475 - Release Date: 5/30/2008 >> 2:53 PM > > |
|||
05-31-2008, 14:58
Post: #7
|
|||
|
|||
Need new muffler DD Series 60
Sorry, no help with muffler contacts. Is putting a straight pipe on it acceptable? That's what I'd do to mine if I were in your predicament. You could run it for a while, pending the new muffler, or live with it if it's not too loud, which I don't think it would be. David '02 LXi, NC Pete Masterson wrote:
|
|||
05-31-2008, 17:01
Post: #8
|
|||
|
|||
Need new muffler DD Series 60
I cant see why it would take that long for The CCW RV guys to fix
it. they may not be consulting the guys in the custom coach fabricting department. sound like they have their own lunch and locker room. Riversides oldest muffler shop is DeAnza 951-684-5424. I would call them first to find out where to go to have big pipes bent . DeAnza wont do bigrigs but they are connected ,honest and helpfull. AZ bus is 3 miles from you and they are a BlueBird dealer. AZ= 951- 781-7188. Prevost has a service facility ( MiraLoma, aprox 8 miles)951-360-2550 Colton truck supply is 4 miles from you their number is 909 888-8300. I'm close by 951-830-5997 GregoryO'Connor 94ptRomolandCa |
|||
06-01-2008, 06:16
Post: #9
|
|||
|
|||
Need new muffler DD Series 60
You're right ... they have a separate BB service facility (at the
front of their property) and the crew doesn't much interface with the rest of CCW. The only apparent interaction occurs when the "roach coach" arrives at break time... I'm also suffering from a service manager who's been on the job here for about a week... so I don't think he's as fully aware of opportunities as he should be. I've found that Dynaflex, located in Commerce, CA, is a manufacturer of heavy duty mufflers and accessories (Colton Truck Supply lists them as one of their suppliers) and they have an extensive catalog -- give them the measurements and they have the components. It looks to me as if CCW could just pull the muffler, measure it up, and order the necessary pieces from DynaFlex (or through CTS). I overheard the service manager and he kept asking about "blue bird mufflers" and getting "no don't have it" ... I think he may have been going about the process in the wrong way. I plan to discuss this with him on Monday morning. (I was offline for several days due to a computer glitch that I finally solved. Dumb Verizon software was giving me an incorrect error message that led me astray for awhile. Now that I'm online, I'm beginning to find a considerable number of potential opportunities.) I also note that in the BB section waiting room, there is a bus industry magazine that reproduced a CCW press release discussion how they converted a bunch of transit busses from ground level to rooftop exhaust systems. I can't imagine that CCW doesn't have the capability onsite to bend up some exhaust pipe.... <sigh> Macy was in Ft Valley this week, and is expected to be "in" on Monday -- I think I'll have a word or two with him as well... While the CCW folks have been decent to me, they sure could use a dump station on their facility... Pete Masterson '95 Blue Bird Wanderlodge WBDA 42 aeonix1@... On the road at CCW in Riverside, CA On May 31, 2008, at 10:01 PM, Gregory OConnor wrote: > I cant see why it would take that long for The CCW RV guys to fix > it. they may not be consulting the guys in the custom coach > fabricting department. sound like they have their own lunch and > locker room. > > Riversides oldest muffler shop is DeAnza 951-684-5424. I would call > them first to find out where to go to have big pipes bent . DeAnza > wont do bigrigs but they are connected ,honest and helpfull. > > AZ bus is 3 miles from you and they are a BlueBird dealer. AZ= 951- > 781-7188. > > Prevost has a service facility ( MiraLoma, aprox 8 miles)951-360-2550 > > Colton truck supply is 4 miles from you their number is 909 888-8300. > > I'm close by 951-830-5997 > > GregoryO'Connor > 94ptRomolandCa > > > |
|||
06-01-2008, 07:14
Post: #10
|
|||
|
|||
Need new muffler DD Series 60
Pete
I think you know as well as the rest of us is that "you don't need a Blue Bird muffler, you need a muffler for a Blue Bird".
It may sound ridiculous,but it is the way it is said whether or not you get what you want.
I think Monday morning will be a more resourceful experience.
Fred & Jeanne Hulse
Morristown Arizona 1997 Wanderlodge WLWB41 |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)