Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Power Tech 15KW Motor & Blower
08-28-2008, 16:05
Post: #1
Power Tech 15KW Motor & Blower
Has any one replaced their Power Tech 15KW Motor & Blower Assembly and
what Part Numbers and source were your findings. Cost $$..etc......

Would it be suggested to replace the whole assembly with motor or just
the motor only. I think I have the motor with a winding to ground and
need at least a motor replacement. Is Grainger the place to go? Pro &
Cons of complete new assembly vs. just motor replacement from any ones
experience in the generator problem department.....

Regards

Gregg
96 WLSD 42'
New Castle, IN
Quote this message in a reply
08-29-2008, 09:02
Post: #2
Power Tech 15KW Motor & Blower
My squirrel cage fan failed last year. I removed the whole assembly
and took it to an electric motor shop where I asked them to fix or
replace the motor and rebalance the fan (look closely and you'll see
little bits of metal bent around some of the blades in the squirrel
cage). They found a replacement motor (as the OEM unit was long out
of existence), installed it, checked the balance of the fan, and
painted everything. I reinstalled the assembly in my coach. I don't
recall exactly what I paid (I'm on the road) but it was about $500 or
so... about double what Tom McCarthy paid in So. CA. (Typical SF Bay
Area prices, though...)

Since you're in the middle of the country, you'll probably find a
more reasonable-priced vendor.

Note: keep in mind that the motor is a 220 vac motor.... Also be sure
to check the capacitors, if they should fail, it might seem like the
motor is dead, when it is not.

Pete Masterson
'95 Blue Bird Wanderlodge WBDA 42
aeonix1@...
On the road at Idaho Springs, CO



On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:

> Has any one replaced their Power Tech 15KW Motor & Blower Assembly and
> what Part Numbers and source were your findings. Cost $$..etc......
>
> Would it be suggested to replace the whole assembly with motor or just
> the motor only. I think I have the motor with a winding to ground and
> need at least a motor replacement. Is Grainger the place to go? Pro &
> Cons of complete new assembly vs. just motor replacement from any ones
> experience in the generator problem department.....
>
> Regards
>
> Gregg
> 96 WLSD 42'
> New Castle, IN
> <snip>
Quote this message in a reply
08-29-2008, 11:28
Post: #3
Power Tech 15KW Motor & Blower
Gregg
I bought my 97 43' from Florida Last year. I found a bill the previous owner paid for the Blower motor and the capacitor from Grainger.
The motor part number is 3M957 1/3 HP 230 V $83.90
The Capacitor part number (5MFD 370 VAC)is 5M003 $3.70
Best of luck, Sorry this toke long to get you the information.
Hisham Amaral
97 WLWB 43'
W. Bloomfield, MI.
--- On Fri, 8/29/08, Pete Masterson wrote:
From: Pete Masterson
Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
To: WanderlodgeForum@yahoogroups.com
Date: Friday, August 29, 2008, 5:02 PM


My squirrel cage fan failed last year. I removed the whole assembly
and took it to an electric motor shop where I asked them to fix or
replace the motor and rebalance the fan (look closely and you'll see
little bits of metal bent around some of the blades in the squirrel
cage). They found a replacement motor (as the OEM unit was long out
of existence), installed it, checked the balance of the fan, and
painted everything. I reinstalled the assembly in my coach. I don't
recall exactly what I paid (I'm on the road) but it was about $500 or
so... about double what Tom McCarthy paid in So. CA. (Typical SF Bay
Area prices, though...)

Since you're in the middle of the country, you'll probably find a
more reasonable-priced vendor.

Note: keep in mind that the motor is a 220 vac motor.... Also be sure
to check the capacitors, if they should fail, it might seem like the
motor is dead, when it is
not.

Pete Masterson
'95 Blue Bird Wanderlodge WBDA 42
"aeonix1%40mac.com"
On the road at Idaho Springs, CO

On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:

> Has any one replaced their Power Tech 15KW Motor & Blower Assembly and
> what Part Numbers and source were your findings. Cost $$..etc..... .
>
> Would it be suggested to replace the whole assembly with motor or just
> the motor only. I think I have the motor with a winding to ground and
> need at least a motor replacement. Is Grainger the place to go? Pro &
> Cons of complete new assembly vs. just motor replacement from any ones
> experience in the generator problem department.. ...
>
> Regards
>
> Gregg
> 96 WLSD 42'
> New Castle, IN
> <snip>
Quote this message in a reply
08-29-2008, 12:40
Post: #4
Power Tech 15KW Motor & Blower
Hishan,

We should post this info in the files section for future refrence.

Kurt Horvath
95 PT-42 10AC


--- In WanderlodgeForum@yahoogroups.com, Hisham Amaral
wrote:
>
> Gregg
>
> I bought my 97 43' from Florida Last year. I found a bill the
previous owner paid for the Blower motor and the capacitor from
Grainger.
>  
> The motor part number is 3M957 1/3 HP 230 V  $83.90
> The Capacitor part number (5MFD 370 VAC) is 5M003  $3.70
>  
> Best of luck, Sorry this toke long to get you the information.
>  
> Hisham Amaral
> 97 WLWB 43'
> W. Bloomfield, MI.
>  
> --- On Fri, 8/29/08, Pete Masterson wrote:
>
> From: Pete Masterson
> Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> To: WanderlodgeForum@yahoogroups.com
> Date: Friday, August 29, 2008, 5:02 PM
>
>
>
>
>
>
> My squirrel cage fan failed last year. I removed the whole assembly
> and took it to an electric motor shop where I asked them to fix or
> replace the motor and rebalance the fan (look closely and you'll
see
> little bits of metal bent around some of the blades in the squirrel
> cage). They found a replacement motor (as the OEM unit was long out
> of existence), installed it, checked the balance of the fan, and
> painted everything. I reinstalled the assembly in my coach. I don't
> recall exactly what I paid (I'm on the road) but it was about $500
or
> so... about double what Tom McCarthy paid in So. CA. (Typical SF
Bay
> Area prices, though...)
>
> Since you're in the middle of the country, you'll probably find a
> more reasonable-priced vendor.
>
> Note: keep in mind that the motor is a 220 vac motor.... Also be
sure
> to check the capacitors, if they should fail, it might seem like
the
> motor is dead, when it is not.
>
> Pete Masterson
> '95 Blue Bird Wanderlodge WBDA 42
> aeonix1@mac. com
> On the road at Idaho Springs, CO
>
> On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:
>
> > Has any one replaced their Power Tech 15KW Motor & Blower
Assembly and
> > what Part Numbers and source were your findings. Cost
$$..etc..... .
> >
> > Would it be suggested to replace the whole assembly with motor or
just
> > the motor only. I think I have the motor with a winding to ground
and
> > need at least a motor replacement. Is Grainger the place to go?
Pro &
> > Cons of complete new assembly vs. just motor replacement from any
ones
> > experience in the generator problem department.. ...
> >
> > Regards
> >
> > Gregg
> > 96 WLSD 42'
> > New Castle, IN
> > <snip>
>
Quote this message in a reply
08-29-2008, 12:54
Post: #5
Power Tech 15KW Motor & Blower
I replaced my complete unit, fan motor and housing when I reworked the genset system 3 years ago. That was before I new about a forum or soon after I found it. I purchased the whole thing from BB at about $225 as I recall. Since I have read that Grainger and other places may have the system cheaper.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
On WiFi in Chattanooga, TN

--- On Fri, 8/29/08, Gregg Kizer wrote:
From: Gregg Kizer
Subject: [WanderlodgeForum] Power Tech 15KW Motor & Blower
To: WanderlodgeForum@yahoogroups.com
Date: Friday, August 29, 2008, 12:05 AM



Has any one replaced their Power Tech 15KW Motor & Blower Assembly and

what Part Numbers and source were your findings. Cost $$..etc..... .



Would it be suggested to replace the whole assembly with motor or just

the motor only. I think I have the motor with a winding to ground and

need at least a motor replacement. Is Grainger the place to go? Pro &

Cons of complete new assembly vs. just motor replacement from any ones

experience in the generator problem department.. ...



Regards



Gregg

96 WLSD 42'

New Castle, IN



Quote this message in a reply
08-29-2008, 13:57
Post: #6
Power Tech 15KW Motor & Blower
Kurt
How do put this info into a files section?
Hisham

--- On Fri, 8/29/08, Kurt Horvath wrote:
From: Kurt Horvath
Subject: [WanderlodgeForum] Re: Power Tech 15KW Motor & Blower
To: WanderlodgeForum@yahoogroups.com
Date: Friday, August 29, 2008, 8:40 PM


Hishan,

We should post this info in the files section for future refrence.

Kurt Horvath
95 PT-42 10AC

--- In "WanderlodgeForum%40yahoogroups.com", Hisham Amaral
wrote:
>
> Gregg
>
> I bought my 97 43' from Florida Last year. I found a bill the
previous owner paid for the Blower motor and the capacitor from
Grainger.
>
> The motor part number is 3M957 1/3 HP 230 V $83.90
> The Capacitor part number (5MFD 370 VAC)is 5M003 $3.70
>
> Best of luck, Sorry this toke long to get you the information.
>
> Hisham Amaral
> 97 WLWB 43'
> W. Bloomfield, MI.
>
> --- On Fri, 8/29/08, Pete Masterson wrote:
>
> From: Pete Masterson
>
Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> To: "WanderlodgeForum%40yahoogroups.com"
> Date: Friday, August 29, 2008, 5:02 PM
>
>
>
>
>
>
> My squirrel cage fan failed last year. I removed the whole assembly
> and took it to an electric motor shop where I asked them to fix or
> replace the motor and rebalance the fan (look closely and you'll
see
> little bits of metal bent around some of the blades in the squirrel
> cage). They found a replacement motor (as the OEM unit was long out
> of existence), installed it, checked the balance of the fan, and
> painted everything. I reinstalled the assembly in my coach. I don't
> recall exactly what I paid (I'm on the road) but it was about $500
or
> so... about double what Tom McCarthy
paid in So. CA. (Typical SF
Bay
> Area prices, though...)
>
> Since you're in the middle of the country, you'll probably find a
> more reasonable-priced vendor.
>
> Note: keep in mind that the motor is a 220 vac motor.... Also be
sure
> to check the capacitors, if they should fail, it might seem like
the
> motor is dead, when it is not.
>
> Pete Masterson
> '95 Blue Bird Wanderlodge WBDA 42
> aeonix1@mac. com
> On the road at Idaho Springs, CO
>
> On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:
>
> > Has any one replaced their Power Tech 15KW Motor & Blower
Assembly and
> > what Part Numbers and source were your findings. Cost
$$..etc..... .
> >
> > Would it be suggested to replace the whole assembly with motor or
just
> > the motor only. I think I have the motor with a winding
to ground
and
> > need at least a motor replacement. Is Grainger the place to go?
Pro &
> > Cons of complete new assembly vs. just motor replacement from any
ones
> > experience in the generator problem department.. ...
> >
> > Regards
> >
> > Gregg
> > 96 WLSD 42'
> > New Castle, IN
> > <snip>
>

Quote this message in a reply
08-29-2008, 14:31
Post: #7
Power Tech 15KW Motor & Blower
Hisham,

It's easy just click on files on the left side of this page. When the
window opens on the right side down a few inches you'll see add file,
click on it. That will open to File name. hit the browse button then
choose what file you want to upload, for example you could place the
info in a word file. You can add a description, and notify the group
if you wish.

The number from Graingers, "3M957 1/3 HP 230 V" has been
discontinued. It has some cross refrenced motors, so I would make a
note of that.


Kurt Horvath
95 PT-42
10AC



--- In WanderlodgeForum@yahoogroups.com, Hisham Amaral
wrote:
>
> Kurt
>  
> How do put this info into a files section?
> Hisham
>
> --- On Fri, 8/29/08, Kurt Horvath wrote:
>
> From: Kurt Horvath
> Subject: [WanderlodgeForum] Re: Power Tech 15KW Motor & Blower
> To: WanderlodgeForum@yahoogroups.com
> Date: Friday, August 29, 2008, 8:40 PM
>
>
>
>
>
>
> Hishan,
>
> We should post this info in the files section for future refrence.
>
> Kurt Horvath
> 95 PT-42 10AC
>
> --- In WanderlodgeForum@ yahoogroups. com, Hisham Amaral
> wrote:
> >
> > Gregg
> >
> > I bought my 97 43' from Florida Last year. I found a bill the
> previous owner paid for the Blower motor and the capacitor from
> Grainger.
> >  
> > The motor part number is 3M957 1/3 HP 230 V  $83.90
> > The Capacitor part number (5MFD 370 VAC) is 5M003  $3.70
> >  
> > Best of luck, Sorry this toke long to get you the information.
> >  
> > Hisham Amaral
> > 97 WLWB 43'
> > W. Bloomfield, MI.
> >  
> > --- On Fri, 8/29/08, Pete Masterson wrote:
> >
> > From: Pete Masterson
> > Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> > To: WanderlodgeForum@ yahoogroups. com
> > Date: Friday, August 29, 2008, 5:02 PM
> >
> >
> >
> >
> >
> >
> > My squirrel cage fan failed last year. I removed the whole
assembly
> > and took it to an electric motor shop where I asked them to fix
or
> > replace the motor and rebalance the fan (look closely and you'll
> see
> > little bits of metal bent around some of the blades in the
squirrel
> > cage). They found a replacement motor (as the OEM unit was long
out
> > of existence), installed it, checked the balance of the fan, and
> > painted everything. I reinstalled the assembly in my coach. I
don't
> > recall exactly what I paid (I'm on the road) but it was about
$500
> or
> > so... about double what Tom McCarthy paid in So. CA. (Typical SF
> Bay
> > Area prices, though...)
> >
> > Since you're in the middle of the country, you'll probably find a
> > more reasonable-priced vendor.
> >
> > Note: keep in mind that the motor is a 220 vac motor.... Also be
> sure
> > to check the capacitors, if they should fail, it might seem like
> the
> > motor is dead, when it is not.
> >
> > Pete Masterson
> > '95 Blue Bird Wanderlodge WBDA 42
> > aeonix1@mac. com
> > On the road at Idaho Springs, CO
> >
> > On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:
> >
> > > Has any one replaced their Power Tech 15KW Motor & Blower
> Assembly and
> > > what Part Numbers and source were your findings. Cost
> $$..etc..... .
> > >
> > > Would it be suggested to replace the whole assembly with motor
or
> just
> > > the motor only. I think I have the motor with a winding to
ground
> and
> > > need at least a motor replacement. Is Grainger the place to go?
> Pro &
> > > Cons of complete new assembly vs. just motor replacement from
any
> ones
> > > experience in the generator problem department.. ...
> > >
> > > Regards
> > >
> > > Gregg
> > > 96 WLSD 42'
> > > New Castle, IN
> > > <snip>
> >
>
Quote this message in a reply
08-29-2008, 15:30
Post: #8
Power Tech 15KW Motor & Blower
And/Or post it in the Parts Database please.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

--- In WanderlodgeForum@yahoogroups.com, "Kurt Horvath"
wrote:
>
> Hishan,
>
> We should post this info in the files section for future refrence.
>
> Kurt Horvath
> 95 PT-42 10AC
>
>
> --- In WanderlodgeForum@yahoogroups.com, Hisham Amaral
> wrote:
> >
> > Gregg
> >
> > I bought my 97 43' from Florida Last year. I found a bill the
> previous owner paid for the Blower motor and the capacitor from
> Grainger.
> >  
> > The motor part number is 3M957 1/3 HP 230 V  $83.90
> > The Capacitor part number (5MFD 370 VAC) is 5M003  $3.70
> >  
> > Best of luck, Sorry this toke long to get you the information.
> >  
> > Hisham Amaral
> > 97 WLWB 43'
> > W. Bloomfield, MI.
> >  
> > --- On Fri, 8/29/08, Pete Masterson wrote:
> >
> > From: Pete Masterson
> > Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> > To: WanderlodgeForum@yahoogroups.com
> > Date: Friday, August 29, 2008, 5:02 PM
> >
> >
> >
> >
> >
> >
> > My squirrel cage fan failed last year. I removed the whole assembly
> > and took it to an electric motor shop where I asked them to fix or
> > replace the motor and rebalance the fan (look closely and you'll
> see
> > little bits of metal bent around some of the blades in the squirrel
> > cage). They found a replacement motor (as the OEM unit was long out
> > of existence), installed it, checked the balance of the fan, and
> > painted everything. I reinstalled the assembly in my coach. I don't
> > recall exactly what I paid (I'm on the road) but it was about $500
> or
> > so... about double what Tom McCarthy paid in So. CA. (Typical SF
> Bay
> > Area prices, though...)
> >
> > Since you're in the middle of the country, you'll probably find a
> > more reasonable-priced vendor.
> >
> > Note: keep in mind that the motor is a 220 vac motor.... Also be
> sure
> > to check the capacitors, if they should fail, it might seem like
> the
> > motor is dead, when it is not.
> >
> > Pete Masterson
> > '95 Blue Bird Wanderlodge WBDA 42
> > aeonix1@mac. com
> > On the road at Idaho Springs, CO
> >
> > On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:
> >
> > > Has any one replaced their Power Tech 15KW Motor & Blower
> Assembly and
> > > what Part Numbers and source were your findings. Cost
> $$..etc..... .
> > >
> > > Would it be suggested to replace the whole assembly with motor or
> just
> > > the motor only. I think I have the motor with a winding to ground
> and
> > > need at least a motor replacement. Is Grainger the place to go?
> Pro &
> > > Cons of complete new assembly vs. just motor replacement from any
> ones
> > > experience in the generator problem department.. ...
> > >
> > > Regards
> > >
> > > Gregg
> > > 96 WLSD 42'
> > > New Castle, IN
> > > <snip>
> >
>
Quote this message in a reply
08-29-2008, 15:33
Post: #9
Power Tech 15KW Motor & Blower
Hey Leroy,

Whatcha doing in Chatanooga? Nascar is in California this weekend. LOL!

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX



--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> I replaced my complete unit, fan motor and housing when I reworked
the genset system 3 years ago. That was before I new about a forum or
soon after I found it. I purchased the whole thing from BB at about
$225 as I recall. Since I have read that Grainger and other places may
have the system cheaper.
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> On WiFi in Chattanooga, TN
>
> --- On Fri, 8/29/08, Gregg Kizer wrote:
> From: Gregg Kizer
> Subject: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> To: WanderlodgeForum@yahoogroups.com
> Date: Friday, August 29, 2008, 12:05 AM
>
>
>
>
>
>
>
>
>
>
>
> Has any one replaced their Power Tech 15KW Motor &
Blower Assembly and
>
> what Part Numbers and source were your findings. Cost $$..etc..... .
>
>
>
> Would it be suggested to replace the whole assembly with motor or just
>
> the motor only. I think I have the motor with a winding to ground and
>
> need at least a motor replacement. Is Grainger the place to go? Pro &
>
> Cons of complete new assembly vs. just motor replacement from any ones
>
> experience in the generator problem department.. ...
>
>
>
> Regards
>
>
>
> Gregg
>
> 96 WLSD 42'
>
> New Castle, IN
>
Quote this message in a reply
08-29-2008, 15:47
Post: #10
Power Tech 15KW Motor & Blower
The "rebalance" of the fan that Pete did sounds like it might be
important to do to keep the motor bearings healthy and reduce
vibration??????Unbalanced may have been the cause of the resulting
motor failure???

GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, Hisham Amaral
wrote:
>
> Gregg
>
> I bought my 97 43' from Florida Last year. I found a bill the
previous owner paid for the Blower motor and the capacitor from
Grainger.
>  
> The motor part number is 3M957 1/3 HP 230 V  $83.90
> The Capacitor part number (5MFD 370 VAC) is 5M003  $3.70
>  
> Best of luck, Sorry this toke long to get you the information.
>  
> Hisham Amaral
> 97 WLWB 43'
> W. Bloomfield, MI.
>  
> --- On Fri, 8/29/08, Pete Masterson wrote:
>
> From: Pete Masterson
> Subject: Re: [WanderlodgeForum] Power Tech 15KW Motor & Blower
> To: WanderlodgeForum@yahoogroups.com
> Date: Friday, August 29, 2008, 5:02 PM
>
>
>
>
>
>
> My squirrel cage fan failed last year. I removed the whole
assembly
> and took it to an electric motor shop where I asked them to fix or
> replace the motor and rebalance the fan (look closely and you'll
see
> little bits of metal bent around some of the blades in the
squirrel
> cage). They found a replacement motor (as the OEM unit was long
out
> of existence), installed it, checked the balance of the fan, and
> painted everything. I reinstalled the assembly in my coach. I
don't
> recall exactly what I paid (I'm on the road) but it was about $500
or
> so... about double what Tom McCarthy paid in So. CA. (Typical SF
Bay
> Area prices, though...)
>
> Since you're in the middle of the country, you'll probably find a
> more reasonable-priced vendor.
>
> Note: keep in mind that the motor is a 220 vac motor.... Also be
sure
> to check the capacitors, if they should fail, it might seem like
the
> motor is dead, when it is not.
>
> Pete Masterson
> '95 Blue Bird Wanderlodge WBDA 42
> aeonix1@mac. com
> On the road at Idaho Springs, CO
>
> On Aug 28, 2008, at 10:05 PM, Gregg Kizer wrote:
>
> > Has any one replaced their Power Tech 15KW Motor & Blower
Assembly and
> > what Part Numbers and source were your findings. Cost
$$..etc..... .
> >
> > Would it be suggested to replace the whole assembly with motor
or just
> > the motor only. I think I have the motor with a winding to
ground and
> > need at least a motor replacement. Is Grainger the place to go?
Pro &
> > Cons of complete new assembly vs. just motor replacement from
any ones
> > experience in the generator problem department.. ...
> >
> > Regards
> >
> > Gregg
> > 96 WLSD 42'
> > New Castle, IN
> > <snip>
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)