Detroit Parts

[ppotter14950]

I have a leaking air shutdown solonoid/cylinder, and with the help of
manuels from Curt, i was able to find the part number 1158765 but dont
know where to look for the parts. I looked on line with no luck and
emailed CCW in riverside but have gotten no response, so if someone has
a favorite place to get their parts, can you please share.

PS thanks again for all the organized Flying flgs rally, we had a great
time.

Paul & Debbie Potter
87PT38
Hesperia CA

[Gregory OConnor]

Colton truckparts off the 215 in SanBernardino. one of the counter guys has ahobby building Detroit two strokes. interestng and resourceful. I use them for most parts first. In Fontane on Valley are several partshouses also but a fun trip is to visit with Mack at Macks used tires on Valley near cherry he has a 6v92 turned up to 400+ horses I cant keep up with.

Greg94ptca

--- In WanderlodgeForum@yahoogroups.com, "ppotter14950" wrote:
>
> I have a leaking air shutdown solonoid/cylinder, and with the help of
> manuels from Curt, i was able to find the part number 1158765 but dont
> know where to look for the parts. I looked on line with no luck and
> emailed CCW in riverside but have gotten no response, so if someone has
> a favorite place to get their parts, can you please share.
>
> PS thanks again for all the organized Flying flgs rally, we had a great
> time.
>
> Paul & Debbie Potter
> 87PT38
> Hesperia CA
>

[jim riordan]

that part number might be a bb number!

jim riordan

Gregory OConnor wrote:

Colton truckparts off the 215 in SanBernardino. one of the counter guys has ahobby building Detroit two strokes. interestng and resourceful. I use them for most parts first. In Fontane on Valley are several partshouses also but a fun trip is to visit with Mack at Macks used tires on Valley near cherry
he has a 6v92 turned up to 400+ horses I cant keep up with.

Greg94ptca

--- In WanderlodgeForum@yahoogroups.com, "ppotter14950" wrote:
>
> I have a leaking air shutdown solonoid/cylinder, and with the help of
> manuels from Curt, i was able to find the part number 1158765 but dont
> know where to look for the parts. I looked on line with no luck and
> emailed CCW in riverside but have gotten no response, so if someone has
> a favorite place to get their parts, can you please share.
>
> PS thanks again for all the organized Flying flgs rally, we had a great
> time.
>
> Paul & Debbie Potter
> 87PT38
> Hesperia CA
>

[P & D]

I didn’t think about that, all the
part numbers are 7 digits long, I wonder if there is a cross for it somewhere, I
will have to look and see if I can find the same part in the engine manual

Thanks

Paul
Potter

87PT38

Hesperia CA

---

From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of jim riordan

Sent: Saturday, November 01, 2008
9:19 AM

To: WanderlodgeForum@yahoogroups.com

Subject: Re: [WanderlodgeForum]
Re: Detroit
Parts

that part number might be a bb number!

jim riordan



Gregory OConnor
com> wrote:

Colton
truckparts off the 215 in SanBernardino. one of the counter
guys has ahobby building Detroit
two strokes. interestng and resourceful. I use them for most parts first.
In Fontane on Valley are several partshouses also but a fun trip is to visit
with Mack at Macks used tires on Valley near cherry he has a 6v92 turned up to
400+ horses I cant keep up with.

Greg94ptca

--- In WanderlodgeForum@yahoogroups.com,
"ppotter14950" wrote:

>

> I have a leaking air shutdown solonoid/cylinder, and with the help of

> manuels from Curt, i was able to find the part number 1158765 but dont

> know where to look for the parts. I looked on line with no luck and

> emailed CCW in riverside but have gotten no response, so if someone has

> a favorite place to get their parts, can you please share.

>

> PS thanks again for all the organized Flying flgs rally, we had a great

> time.

>

> Paul & Debbie Potter

> 87PT38

> Hesperia CA

>

[Curt Sprenger]

I have had good luck by calling Bluebird (CCW) in Georgia, asking them to x-ref the BB number to the part manufacturer/number.

On Sat, Nov 1, 2008 at 3:16 PM, P & D <"audvid1@gte.net"> wrote:

I didn't think about that, all the
part numbers are 7 digits long, I wonder if there is a cross for it somewhere, I
will have to look and see if I can find the same part in the engine manual

Thanks

Paul
Potter

87PT38

Hesperia CA

---

From: "WanderlodgeForum@yahoogroups.com" [mailto:"WanderlodgeForum@yahoogroups.com"] On Behalf Of jim riordan

Sent: Saturday, November 01, 2008
9:19 AM

To: "WanderlodgeForum@yahoogroups.com"

Subject: Re: [WanderlodgeForum]
Re: Detroit
Parts

that part number might be a bb number!

jim riordan



Gregory OConnor
<"Gregoryoc@aol.com"> wrote:

Colton
truckparts off the 215 in SanBernardino. one of the counter
guys has ahobby building Detroit
two strokes. interestng and resourceful. I use them for most parts first.
In Fontane on Valley are several partshouses also but a fun trip is to visit
with Mack at Macks used tires on Valley near cherry he has a 6v92 turned up to
400+ horses I cant keep up with.

Greg94ptca

--- In "WanderlodgeForum@yahoogroups.com",
"ppotter14950" wrote:

>

> I have a leaking air shutdown solonoid/cylinder, and with the help of

> manuels from Curt, i was able to find the part number 1158765 but dont

> know where to look for the parts. I looked on line with no luck and

> emailed CCW in riverside but have gotten no response, so if someone has

> a favorite place to get their parts, can you please share.

>

> PS thanks again for all the organized Flying flgs rally, we had a great

> time.

>

> Paul & Debbie Potter

> 87PT38

> Hesperia CA

>

--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA