Generator gagues not working
|
03-15-2009, 12:32
Post: #1
|
|||
|
|||
Generator gagues not working
We bought a 1982 FC-33 and when we looked at the unit the Generator gauges in
the dash worked, we bought the couch (a week ago and got it home) started the generator and the gagues are not working what have i gotten turned off? John |
|||
03-15-2009, 15:14
Post: #2
|
|||
|
|||
Generator gagues not working
John:
There were no switches to control the gauges for the generator on my 82FC35. The other sad part is I have no idea what could be wrong. Marv 2004 m380 Ocean Shores, WA --- In WanderlodgeForum@yahoogroups.com, Whitewolf_993 wrote: > > > > We bought a 1982 FC-33 and when we looked at the unit the Generator gauges in the dash worked, we bought the couch (a week ago and got it home) started the generator and the gagues are not working what have i gotten turned off? > > John > |
|||
03-16-2009, 01:14
Post: #3
|
|||
|
|||
Generator gagues not working
|
|||
03-16-2009, 02:37
Post: #4
|
|||
|
|||
Generator gagues not working
|
|||
03-16-2009, 11:08
Post: #5
|
|||
|
|||
Generator gagues not working
|
|||
03-16-2009, 12:19
Post: #6
|
|||
|
|||
Generator gagues not working
Hi John: The oil pressure sender is located on the side nearest the entry
door. It is a large silver looking can with a domeish top and a wire attached to it. The Temp sender is on top of the Perkins to the front of the block and looks like a modified spark plug. The signal should go through the control box then harness. Safe travels, Ralph & Charolette Fullenwider '84 FC35 "Ruff Diamond" Duncan, Oklahoma At 03:08 PM 3/16/2009 -0700, you wrote: >There are senders on the sides of the perkins. When Ralph gets online >perhaps he will give the exact location. I'm not at my coach at the moment. > >Ernie Ekberg >83PT40 >Wanderlodge >Weatherford, Tx ><http://autos.groups.yahoo.com/group/erni...gandrepair>http://autos.gro\ ups.yahoo.com/group/erniesremodelingandrepair > > >--- On Mon, 3/16/09, Whitewolf_993 >From: Whitewolf_993 >Subject: Re: [WanderlodgeForum] Re: Generator gagues not working >To: WanderlodgeForum@yahoogroups.com >Date: Monday, March 16, 2009, 8:37 AM > > > >I did run the generator out and did not see anything where is the sender >located? >--- On Mon, 3/16/09, Ernie Ekberg >>From: Ernie Ekberg >>Subject: Re: [WanderlodgeForum] Re: Generator gagues not working >>To: WanderlodgeForum@ yahoogroups. com >>Date: Monday, March 16, 2009, 7:14 AM >> >>John, run your generator out and see if the wiring harness has fallen off >>its senders. >> >>Ernie Ekberg >>83PT40 >>Wanderlodge >>Weatherford, Tx >><http://autos.groups.yahoo.com/group/erni...gandrepair>http://autos. >>groups.yahoo. com/group/ erniesremodeling andrepair >> >> >> >>--- On Sun, 3/15/09, Marv & Jean >>>From: Marv & Jean >>>Subject: [WanderlodgeForum] Re: Generator gagues not working >>>To: WanderlodgeForum@ yahoogroups. com >>>Date: Sunday, March 15, 2009, 9:14 PM >>> >>>John: >>> >>>There were no switches to control the gauges for the generator on my >>>82FC35. The other sad part is I have no idea what could be wrong. >>> >>>Marv >>>2004 m380 >>>Ocean Shores, WA >>> >>>--- In >>><http://us.mc431.mail.yahoo.com/mc/compos...oups.\ .com>WanderlodgeForum@ >>>yahoogroups. com, Whitewolf_993 >>> > >>> > >>> > >>> > We bought a 1982 FC-33 and when we looked at the unit the Generator >>> gauges in the dash worked, we bought the couch (a week ago and got it >>> home) started the generator and the gagues are not working what have i >>> gotten turned off? >>> > >>> > John >>> > |
|||
03-22-2009, 14:51
Post: #7
|
|||
|
|||
Generator gagues not working
Its Fixed, the harness was binding someone tried to fix somewhere in the past
but mad a poor joint, so I soldered and heat shrink and redressed the harness and replaced the makeshift battery tie down and they are working. thanks for the help. --- On Mon, 3/16/09, Ralph L. Fullenwider > From: Ralph L. Fullenwider > Subject: Re: [WanderlodgeForum] Re: Generator gagues not working > To: WanderlodgeForum@yahoogroups.com > Date: Monday, March 16, 2009, 6:19 PM > > > > > > > > > > > > > > > > > > > Hi John: The oil pressure sender is located > on the side nearest the entry > > door. It is a large silver looking can with a domeish top > and a wire > > attached to it. The Temp sender is on top of the Perkins to > the front of > > the block and looks like a modified spark plug. > > > > The signal should go through the control box then harness. > > > > Safe travels, > > > > Ralph & Charolette Fullenwider > > '84 FC35 "Ruff Diamond" > > Duncan, Oklahoma > > > > At 03:08 PM 3/16/2009 -0700, you wrote: > > >There are senders on the sides of the perkins. When > Ralph gets online > > >perhaps he will give the exact location. I'm not at > my coach at the moment. > > > > > >Ernie Ekberg > > >83PT40 > > >Wanderlodge > > >Weatherford, Tx > > ><http://autos. > groups.yahoo. com/group/ erniesremodeling > andrepair>http://autos. > groups.yahoo. com/group/ erniesremodeling andrepair > > > > > > > > >--- On Mon, 3/16/09, Whitewolf_993 > > >From: Whitewolf_993 > > >Subject: Re: [WanderlodgeForum] Re: Generator gagues > not working > > >To: WanderlodgeForum@ > yahoogroups. com > > >Date: Monday, March 16, 2009, 8:37 AM > > > > > > > > > > > >I did run the generator out and did not see anything > where is the sender > > >located? > > >--- On Mon, 3/16/09, Ernie Ekberg > > >>From: Ernie Ekberg > > >>Subject: Re: [WanderlodgeForum] Re: Generator > gagues not working > > >>To: WanderlodgeForum@ yahoogroups. com > > >>Date: Monday, March 16, 2009, 7:14 AM > > >> > > >>John, run your generator out and see if the wiring > harness has fallen off > > >>its senders. > > >> > > >>Ernie Ekberg > > >>83PT40 > > >>Wanderlodge > > >>Weatherford, Tx > > >><http://autos. > groups.yahoo. com/group/ erniesremodeling > andrepair>http://autos. > > >>groups.yahoo. com/group/ erniesremodeling > andrepair > > >> > > >> > > >> > > >>--- On Sun, 3/15/09, Marv & Jean > > > >>>From: Marv & Jean > > >>>Subject: [WanderlodgeForum] Re: Generator > gagues not working > > >>>To: WanderlodgeForum@ yahoogroups. com > > >>>Date: Sunday, March 15, 2009, 9:14 PM > > >>> > > >>>John: > > >>> > > >>>There were no switches to control the gauges > for the generator on my > > >>>82FC35. The other sad part is I have no idea > what could be wrong. > > >>> > > >>>Marv > > >>>2004 m380 > > >>>Ocean Shores, WA > > >>> > > >>>--- In > > >>><http://us.mc431. > mail.yahoo. com/mc/compose? to=WanderlodgeFo > rum%40yahoogroup s..com>WanderlodgeForum@ > > >>>yahoogroups. com, Whitewolf_993 > > > >>> > > > >>> > > > >>> > > > >>> > We bought a 1982 FC-33 and when we looked > at the unit the Generator > > >>> gauges in the dash worked, we bought the couch > (a week ago and got it > > >>> home) started the generator and the gagues are > not working what have i > > >>> gotten turned off? > > >>> > > > >>> > John > > >>> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)