PARTS

[Dorn Hetzel]

My apologies, I think there was one of those "what about parts, now?" threads somewhere in there and I was speaking sort of in relation to that.

The existing cracks and chips in my windshields are in the bottom couple inches, so I really don't even notice them for now. It's good to hear the glass is common with the school bus platform.


Regards,

Dorn Hetzel
77FC35
Hogansville, GA

On Mon, Feb 9, 2009 at 10:11 AM, Bob Lawrence <"bobandarlene@earthlink.net"> wrote:

Why is this under the flourescent heading?

New topic, new heading.

Bob Lawrence

84 PT36

Texas

>

> Is there a source for windshields for a 77fc35 other than the

factory? I

> have some moderate cracks and rock chips in my windshields. Not

enough that

> I wanted to replace them today, but I had been planning to buy a

set or two

> to put aside for a future replacement.

>

> Dorn Hetzel

> 77fc35

> Hogansville, ga

>

> On Feb 9, 2009 7:28 AM, "Stephen Birtles" wrote:

>

> WE have many Bluebird parts Ballast, inverters, pumps Primus parts

> Dump valve parts both new complete and replacement parts

> Stainless Exhausts for selected coaches

>

> Give me a call 888 668 4288 or look on our website

dupreeproducts.com

>

> Thanks Stephen 77 fc35

>

>

> --- In "WanderlodgeForum%40yahoogroups.com"
40yahoogroups.com>,

> "Jack & Donna Smith"

>

> wrote: > > When we aquired our coach, most of the

Flourescent

> lights did not > work, ...

>

[brian_romeo]

My dad had a 78 Blue Bird and liked to collect Blue Bird parts. There are to
many to mention. If anyone is out there, like my father, that collects or
repairs older Birds, please email me.

[David]

--- In WanderlodgeForum@yahoogroups.com, "brian_romeo" wrote:
>
> My dad had a 78 Blue Bird and liked to collect Blue Bird parts. There are to
many to mention. If anyone is out there, like my father, that collects or
repairs older Birds, please email me.
>
I need a chrome mrear bumper for a1986 PT 40 can you help David

[mcmike1952]

I have the rear skirt that I think came off of my 89 PT 40. It is a heavy
rubber with it looks like stainless supports. It attaches to the bottom of the
bumper so it would probably fit just aboout any Bluebird. Don't really want to
ship. Also found the trim that goes around the Micro/Conv oven. I think it
came out of my 89 PT 40. Anybody close or that could deliver it to the Rockport
Rally. I found some other stuff while cleaning out the shed but I don't
remember what it was so I'll post it later

[mcmike1952]

I also have a starter for a 8V92. Mike

--- In WanderlodgeForum@yahoogroups.com, "mcmike1952" <mmcmahan1952@...> wrote:
>
> I have the rear skirt that I think came off of my 89 PT 40. It is a heavy
rubber with it looks like stainless supports. It attaches to the bottom of the
bumper so it would probably fit just aboout any Bluebird. Don't really want to
ship. Also found the trim that goes around the Micro/Conv oven. I think it
came out of my 89 PT 40. Anybody close or that could deliver it to the Rockport
Rally. I found some other stuff while cleaning out the shed but I don't
remember what it was so I'll post it later
>

[KIP M HENRY]

I'm looking for a front window screen frame for my 88 PT. What about the nutone blender? Thanks Kip "kiphenry@bellsouth.net"

[Markus Meyer]

Kip,



I believe I have an extra blender.



Markus

86 PT40

---

To: WanderlodgeForum@yahoogroups.com
From: kiphenry@...
Date: Sat, 23 Jul 2011 07:47:35 -0700
Subject: [WanderlodgeForum] parts

I'm looking for a front window screen frame for my 88 PT. What about the nutone blender? Thanks Kip "kiphenry@bellsouth.net"

[George Burke]

Marcus, If Kip ends up not wanting/needing the blender, or if anyone else has one, I need one that will fit a 1977 FC. Pls. let me know at "gnburke@gmail.com" Thanks, George Burke 1977 FC 31 Charlotte, N.C. 28212

On Sat, Jul 23, 2011 at 11:16 AM, Markus Meyer <"markusfmeyer@hotmail.com"> wrote:

 

 

Kip,

 

I believe I have an extra blender.

 

Markus

86 PT40

 

---

To: "WanderlodgeForum@yahoogroups.com"
From: "kiphenry@bellsouth.net"
Date: Sat, 23 Jul 2011 07:47:35 -0700

Subject: [WanderlodgeForum] parts

I'm looking for a front window screen frame for my 88 PT. What about the nutone blender? Thanks Kip "kiphenry@bellsouth.net" Â

[Markus Meyer]

Kip,



You out there? I emailed you several times about the blender, including pictures, but never heard back. I'll give it another day or two, then I'll let George have dibs.

Markus

---

To: WanderlodgeForum@yahoogroups.com
From: gnburke@...
Date: Sun, 24 Jul 2011 12:39:43 -0400
Subject: Re: [WanderlodgeForum] parts

Marcus, If Kip ends up not wanting/needing the blender, or if anyone else has one, I need one that will fit a 1977 FC. Pls. let me know at "gnburke@gmail.com" Thanks, George Burke 1977 FC 31 Charlotte, N.C. 28212

On Sat, Jul 23, 2011 at 11:16 AM, Markus Meyer <"markusfmeyer@hotmail.com"> wrote:

Kip,

I believe I have an extra blender.

Markus
86 PT40

---

To: "WanderlodgeForum@yahoogroups.com"
From: "kiphenry@bellsouth.net"
Date: Sat, 23 Jul 2011 07:47:35 -0700
Subject: [WanderlodgeForum] parts

I'm looking for a front window screen frame for my 88 PT. What about the nutone blender? Thanks Kip "kiphenry@bellsouth.net"

[cfsomers@...]

If someone else has an extra blender, mine is missing action.
cfsomers@...
Chuck
1981FCSB35>
> Kip,
>
> You out there? I emailed you several times about the blender, including
> pictures, but never heard back. I'll give it another day or two, then
> I'll let George have dibs.
>
> Markus
>
>
>
>
> To: WanderlodgeForum@yahoogroups.com
> From: gnburke@...
> Date: Sun, 24 Jul 2011 12:39:43 -0400
> Subject: Re: [WanderlodgeForum] parts
>
>
>
>
>
>
> Marcus, If Kip ends up not wanting/needing the blender, or if anyone else
> has one, I need one that will fit a 1977 FC. Pls. let me know at
> gnburke@... Thanks, George Burke 1977 FC 31 Charlotte, N.C. 28212
>
>
> On Sat, Jul 23, 2011 at 11:16 AM, Markus Meyer
> wrote:
>
>
>
>
>
>
>
>
> Kip,
>
> I believe I have an extra blender.
>
> Markus
> 86 PT40
>
>
>
>
> To: WanderlodgeForum@yahoogroups.com
> From: kiphenry@...
> Date: Sat, 23 Jul 2011 07:47:35 -0700
> Subject: [WanderlodgeForum] parts
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I'm looking for a front window screen frame for my 88 PT. What about the
> nutone blender? Thanks
> Kip
> kiphenry@...
>
>
>
>
>
>
>
>
>
>
>
>
>