Alternative to VMSPC

[Ray Davis]

(03-02-2013 12:00)pgchin Wrote:  Ray,
1) It's a Deustch Diagnostic connector PN HD10-6-96P
2) Diagnostic Pins (4 wires used)
B-goes to c1 on the ECM connector
A- goes to c2 on the ECM connector
C- goes to b3 on the ECM connector
E- black ground goes to black ground in the power harness connector

Pete,

This sounds correct. A and B are the data pins, C is 12v power, and E is ground. Sounds like you are perfectly setup.

Send me a note to ray@rvtechtools.com, we'll take this offline, and we can get you a unit, when you're ready.

Ray

[pgchin]

(03-04-2013 19:08)Ray Davis Wrote:  

(03-02-2013 12:00)pgchin Wrote:  Ray,
1) It's a Deustch Diagnostic connector PN HD10-6-96P
2) Diagnostic Pins (4 wires used)
B-goes to c1 on the ECM connector
A- goes to c2 on the ECM connector
C- goes to b3 on the ECM connector
E- black ground goes to black ground in the power harness connector

Pete,

This sounds correct. A and B are the data pins, C is 12v power, and E is ground. Sounds like you are perfectly setup.

Send me a note to ray@rvtechtools.com, we'll take this offline, and we can get you a unit, when you're ready.

Ray

Hi Ray,
Congrats on being a first time Grand Pa! Needles to say, I'm sure you are walking on clouds.......FYI When you get a chance, check your email on rvtech tools, email from me It might be in your "span" folder.... I have a yahoo ID, thanks! PM here if you did not get it, thanks!