Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Alternative to VMSPC
03-04-2013, 19:08
Post: #21
RE: Alternative to VMSPC
(03-02-2013 12:00)pgchin Wrote:  Ray,
1) It's a Deustch Diagnostic connector PN HD10-6-96P
2) Diagnostic Pins (4 wires used)
B-goes to c1 on the ECM connector
A- goes to c2 on the ECM connector
C- goes to b3 on the ECM connector
E- black ground goes to black ground in the power harness connector

Pete,

This sounds correct. A and B are the data pins, C is 12v power, and E is ground. Sounds like you are perfectly setup.

Send me a note to ray@rvtechtools.com, we'll take this offline, and we can get you a unit, when you're ready.

Ray
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
Alternative to VMSPC - Arcticdude - 02-21-2013, 21:32
RE: Alternative to VMSPC - Itchintogo - 02-22-2013, 03:30
RE: Alternative to VMSPC - davidbrady - 02-22-2013, 08:40
RE: Alternative to VMSPC - davidbrady - 02-22-2013, 12:26
RE: Alternative to VMSPC - pgchin - 02-22-2013, 12:32
RE: Alternative to VMSPC - Ray Davis - 02-22-2013, 14:27
RE: Alternative to VMSPC - pgchin - 02-22-2013, 15:17
RE: Alternative to VMSPC - Ray Davis - 02-22-2013, 15:39
RE: Alternative to VMSPC - pgchin - 02-22-2013, 15:59
RE: Alternative to VMSPC - Ray Davis - 02-22-2013, 17:58
RE: Alternative to VMSPC - Ray Davis - 02-26-2013, 12:58
RE: Alternative to VMSPC - pgchin - 02-26-2013, 13:56
RE: Alternative to VMSPC - Ray Davis - 02-26-2013, 14:49
RE: Alternative to VMSPC - pgchin - 02-26-2013, 15:44
RE: Alternative to VMSPC - Ray Davis - 02-26-2013, 16:10
RE: Alternative to VMSPC - pgchin - 02-26-2013, 16:30
RE: Alternative to VMSPC - pgchin - 03-02-2013, 12:00
RE: Alternative to VMSPC - Ray Davis - 03-04-2013 19:08
RE: Alternative to VMSPC - pgchin - 03-12-2013, 15:41
RE: Alternative to VMSPC - Ray Davis - 03-02-2013, 20:17
RE: Alternative to VMSPC - pgchin - 03-02-2013, 20:40
RE: Alternative to VMSPC - davidbrady - 03-02-2013, 21:28



User(s) browsing this thread: 1 Guest(s)