Slide 101

[GregOConnor]

My caution is to not accidently find the problem and not realize the repair. That would continue the gremlin slide problem the pool had. I documented my sequence and all the voltage led and any reaction at each step. Took pictures of all the hwh appliances key pads and wires then sent everything to Hwh. A technical adviser called back and said key pad and the fuse for the circuit board ignition should have 12 volts. Some rv builders use this input to prompt other safety steps like cutting voltage if normaly/safe switches are closed. He asked me to follow the brown wire to ignition where I found a incomplete crimped butt connecto the connector was not issue bluebird but a repair and the wire con t inured to a relay aftermarket install at the passanger toe panel . I re spliced and made a solder connection then ran the slide in and out. I also tried to start the slide operation with the bay door open and that safety prompt is still working. I like the safety prompts but would also like to know how to bypass. I don't understand why the butt connector and relay was used for that splice So I ran a new ignition powered supply from the driver outside Fuse location.