HWH Jacks will not retract

[cruisergeek]

So, after a whole lotta really intense troubleshooting, I found a problem with power going to the main I/O board that supplies 12v to the HWH system. That was found to be the culprit, not supplying power to open solenoids thus not letting fluid flow. Really strange and deep problem. All is good now, and everything works good as new.

Thanks to everyone for their input and assistance.

The problem was caused by me, not letting the system rest between cycling between the attempts to lower and raise the jacks.

Take time between cycles, give the solenoids a chance to cool and recover. My anxiety to show my family this beautiful new coach was the leading cause in the power failure.

I hope someone reads this before suffering the consequences of my errors.

Time to move to the next items needing attention, which aren't many, but there are a few.

Thanks again for all the input.....