Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fan Speed
04-14-2016, 17:58 (This post was last modified: 04-14-2016 18:02 by cmillsap.)
Post: #14
RE: Fan Speed
AL,
The original model of the Hayden fans was not available when I replaced them on my LXI. I used 2 Hayden Model # 3680 fans to replace the originals. I believe the CFM was fairly close to the originals but we had to make a mounting bracket to attach the fans to the Hayden cooler. I think a NFB bracket kit may work just as well if you can find one at an auto parts store. The fans can be purchased almost anywhere such as an auto parts store or Amazon.

Two things you should do if you do use these fans is to make sure they are running in the correct direction (pulling) and also reduce the present fuse size from the current 30A to a 20A as the 3680 fans are rated at 8.8 amps each. Both fans are on the same circuit.

Here they are on Amazon:

http://www.amazon.com/Hayden-Automotive-...an+%233680

Chuck & Tela Millsap
2003 Prevost Marathon XLII
2000 LXi #2 S/S (Sold)
2004 M380 D/S (Sold)
2000 LXi #1 N/S (Sold
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
Fan Speed - al perna - 02-11-2016, 12:50
RE: Fan Speed - davidbrady - 02-11-2016, 17:38
RE: Fan Speed - cmillsap - 02-11-2016, 21:29
RE: Fan Speed - cvaughn - 02-14-2016, 13:14
RE: Fan Speed - al perna - 02-15-2016, 12:02
RE: Fan Speed - al perna - 03-09-2016, 13:43
RE: Fan Speed - al perna - 03-11-2016, 16:30
RE: Fan Speed - timetravelers - 03-11-2016, 22:32
RE: Fan Speed - cvaughn - 03-13-2016, 11:56
RE: Fan Speed - timetravelers - 03-13-2016, 23:52
RE: Fan Speed - timetravelers - 04-04-2016, 15:16
RE: Fan Speed - al perna - 04-14-2016, 13:41
RE: Fan Speed - al perna - 04-14-2016, 15:40
RE: Fan Speed - cmillsap - 04-14-2016 17:58
RE: Fan Speed - al perna - 04-18-2016, 18:08
RE: Fan Speed - GregOConnor - 04-23-2016, 12:18
RE: Fan Speed - al perna - 04-23-2016, 20:24
RE: Fan Speed - GregOConnor - 04-24-2016, 00:52



User(s) browsing this thread: 2 Guest(s)