Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Generator Slide
08-19-2014, 13:36
Post: #8
RE: Generator Slide
test the switch legs for continuity to ground. if not continuous (no beep from your meter) assume it is a 12 volt + source. then add 12 volt to the center of your'in/out switch' , then move the switch, or add 12v+ to either side to see if it signals the relay. If it opens you have isolated the problem to the signal side of the relay. if it is a loss of power to the signal side of the relay, it is probably a broken wire or bad connection some place. there may be other source of 12 volt that is live when the genset is on or off that could work until you find the issue?? "a blown fuse is never the problem, it is one of the results"

Gregory O'Connor
2001 LXi43ss
Romoland California 92585
951-830-5997
Rainbowrv.com
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
Generator Slide - csprenger - 03-19-2013, 16:39
RE: Generator Slide - DOSZORROS - 03-19-2013, 18:24
RE: Generator Slide - Itchintogo - 03-20-2013, 19:25
RE: Generator Slide - csprenger - 03-21-2013, 11:49
RE: Generator Slide - cire - 03-21-2013, 13:32
RE: Generator Slide - Arcticdude - 03-21-2013, 14:46
RE: Generator Slide - cmillsap - 07-22-2014, 20:35
RE: Generator Slide - GregOConnor - 08-19-2014 13:36
RE: Generator Slide - RetDA - 08-20-2014, 07:51
RE: Generator Slide - Bamagfc - 09-08-2015, 00:13
RE: Generator Slide - davidbrady - 09-08-2015, 12:10
RE: Generator Slide - cmillsap - 09-08-2015, 14:23
RE: Generator Slide - Bamagfc - 09-08-2015, 23:35
RE: Generator Slide - GregOConnor - 09-09-2015, 01:30



User(s) browsing this thread: 1 Guest(s)