Step- 83 FC

[Stephen H]

Any help appriciated on locating a replacement step, or maybe someone
who fabricates an Aluminum step?
Thanks,
Stephen H
Plant City, Fl

[brad barton]

I wonder if part of a truck ramp, steel or aluminum might be able to be cut to fit.

BradBarton00LXiDFW bbartonwx@...

---

To: WanderlodgeForum@yahoogroups.com
From: share74@...
Date: Thu, 29 May 2008 01:25:56 +0000
Subject: [WanderlodgeForum] Step- 83 FC

Any help appriciated on locating a replacement step, or maybe someone
who fabricates an Aluminum step?
Thanks,
Stephen H
Plant City, Fl

---

E-mail for the greater good. Join the i’m Initiative from Microsoft.

[Stephen Hare]

Good idea Brad. I was thinking Aluminum, due to irs looks, and Anti-rust qualities

Stephen

On Wed, May 28, 2008 at 10:33 PM, brad barton <"bbartonwx@hotmail.com"> wrote:

I wonder if part of a truck ramp, steel or aluminum might be able to be cut to fit.

BradBarton00LXiDFW "bbartonwx@hotmail.com"

---

To: "WanderlodgeForum@yahoogroups.com"
From: "share74@gmail.com"
Date: Thu, 29 May 2008 01:25:56 +0000

Subject: [WanderlodgeForum] Step- 83 FC

Any help appriciated on locating a replacement step, or maybe someone
who fabricates an Aluminum step?
Thanks,
Stephen H
Plant City, Fl

---

E-mail for the greater good. Join the i'm Initiative from Microsoft.

[cfsomers@...]

I have used a lot of fabricators and I am sure they can put together an
aluminum step. I would use a diamond plate for the top. I know of a
fabricator in the Daytona Beach area that would be able to assit you.

Beachside Fabrications, They are actually in Bunnel, Florida.

If you like I can get you a phone number for them. They do quite a bit of
work for myself. I am out of state at the moment, but will be back next
Tuesday.

Chuck Somers
81FC35SB
cfsomers@...

I wonder if part of a truck ramp, steel or aluminum might be able to be
> cut to fit.Brad Barton 00LXiDFW bbartonwx@...
>
>
> To: WanderlodgeForum@...: share74@...: Thu, 29
> May 2008 01:25:56 +0000Subject: [WanderlodgeForum] Step- 83 FC
>
>
>
>
> Any help appriciated on locating a replacement step, or maybe someone who
> fabricates an Aluminum step? Thanks,Stephen HPlant City, Fl
>
>
>
>
>
>
> _________________________________________________________________
> E-mail for the greater good. Join the i’m Initiative from Microsoft.
> http://im.live.com/Messenger/IM/Join/Def...ce=EML_WL_
> GreaterGood

[Bob Lawrence]

I took our old step to a marine fabricator and had it done out of
stainless. Price was around $400. No rust problems in the future.
Bob Lawrence
84 PT36
Branson, Mo
>
> I have used a lot of fabricators and I am sure they can put
together an
> aluminum step. I would use a diamond plate for the top. I know of a
> fabricator in the Daytona Beach area that would be able to assit
you.
>
> Beachside Fabrications, They are actually in Bunnel, Florida.
>
> If you like I can get you a phone number for them. They do quite a
bit of
> work for myself. I am out of state at the moment, but will be back
next
> Tuesday.
>
> Chuck Somers
> 81FC35SB
> cfsomers@...
>
> I wonder if part of a truck ramp, steel or aluminum might be able
to be
> > cut to fit.Brad Barton 00LXiDFW bbartonwx@...
> >
> >
> > To: WanderlodgeForum@...: share74@...: Thu, 29
> > May 2008 01:25:56 +0000Subject: [WanderlodgeForum] Step- 83 FC
> >
> >
> >
> >
> > Any help appriciated on locating a replacement step, or maybe
someone who
> > fabricates an Aluminum step? Thanks,Stephen HPlant City, Fl
> >
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > E-mail for the greater good. Join the i'm Initiative from
Microsoft.
> > http://im.live.com/Messenger/IM/Join/Def...ce=EML_WL_
> > GreaterGood
>

[brad barton]

Bob,

That sounds good for a new stainless steel step. I think we paid that much for new Kwikee on a previous coach and it was just powder-coated. My LXi had polished stainless under the mat which I recently replaced.

BradBarton00LXiDFW bbartonwx@...

---

To: WanderlodgeForum@yahoogroups.com
From: bobandarlene@...
Date: Fri, 30 May 2008 14:13:59 +0000
Subject: [WanderlodgeForum] Re: Step- 83 FC

I took our old step to a marine fabricator and had it done out of
stainless. Price was around $400. No rust problems in the future.
Bob Lawrence
84 PT36
Branson, Mo
>
> I have used a lot of fabricators and I am sure they can put
together an
> aluminum step. I would use a diamond plate for the top. I know of a
> fabricator in the Daytona Beach area that would be able to assit
you.
>
> Beachside Fabrications, They are actually in Bunnel, Florida.
>
> If you like I can get you a phone number for them. They do quite a
bit of
> work for myself. I am out of state at the moment, but will be back
next
> Tuesday.
>
> Chuck Somers
> 81FC35SB
> cfsomers@...
>
> I wonder if part of a truck ramp, steel or aluminum might be able
to be
> > cut to fit.Brad Barton 00LXiDFW bbartonwx@...
> >
> >
> > To: WanderlodgeForum@...: share74@...: Thu, 29
> > May 2008 01:25:56 +0000Subject: [WanderlodgeForum] Step- 83 FC
> >
> >
> >
> >
> > Any help appriciated on locating a replacement step, or maybe
someone who
> > fabricates an Aluminum step? Thanks,Stephen HPlant City, Fl
> >
> >
> >
> >
> >
> >
> > __________________________________________________________
> > E-mail for the greater good. Join the i'm Initiative from
Microsoft.
> > http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_
> > GreaterGood
>

---

E-mail for the greater good. Join the i’m Initiative from Microsoft.