Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Koni FSD Shocks
04-04-2007, 20:43
Post: #22
Koni FSD Shocks
Right, you asked Brady how much he had to spare. When he said the axle would
carry 25K by engineer estimate it left out the fact that legal limit was less,
but you already knew that. I didn't know the interstate limit was 20K and that
is useful information.

Dan
88pt38
Jackson, MS
----- Original Message -----
From: Don Bradner
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, April 04, 2007 9:51 PM
Subject: Re: [WanderlodgeForum] Re: Koni FSD Shocks


Actually, federal law on interstates. 20,000 for single, 34,000 for tandem.
Probably a reason the Prevost shifts weight to the steer.

A lot of big bus/motorhomes are lucky they don't have to cross the scales. My
drivers have a GAWR of 23,000, with actual weight of 19,300 when weighed with
about a half-tank of fuel; I figure another 900 there, and we just added a
Washer/Dryer over the drivers so I'm likely near 20,500 fully loaded.

Tickets normally start (for commercial rigs) at 5% over the limit.

On 4/4/2007 at 9:28 PM Dan wrote:

>Hi, several states have a maximum single axle weight of 20,000 lbs. You
>are over that already.
>
>Dan
>88PT38
>Jackson, MS
>
> ----- Original Message -----
> From: david brady
> To: WanderlodgeForum@yahoogroups.com
> Sent: Wednesday, April 04, 2007 9:01 PM
> Subject: [WanderlodgeForum] Re: Koni FSD Shocks
>
>
> steer: 16000lb
> drive: 25000lb (as reported to me by a Ridewell engineer)
> tag: 13200lb
>
> David Brady
> '02 LXi, Smokey
> NC
>
> --- In WanderlodgeForum@yahoogroups.com, "Don Bradner"
> wrote:
> >
> > What are the GAWR on your LXI? In other words, how much do you have
> to spare on that 14200/22000/11000?

Don Bradner
90 PT40 "Blue Thunder"
Eureka, CA






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.26/746 - Release Date: 4/4/2007 1:09
PM


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
Koni FSD Shocks - David Brady - 07-06-2006, 02:09
Koni FSD Shocks - Robert Britton - 03-26-2007, 16:41
Koni FSD Shocks - erniecarpet@... - 03-26-2007, 20:19
Koni FSD Shocks - brad barton - 03-26-2007, 21:02
Koni FSD Shocks - John Stiles - 03-26-2007, 23:22
Koni FSD Shocks - Eric Johnson - 03-27-2007, 02:07
Koni FSD Shocks - Eric Johnson - 03-27-2007, 02:13
Koni FSD Shocks - brad barton - 03-27-2007, 04:15
Koni FSD Shocks - David Brady - 04-04-2007, 10:14
Koni FSD Shocks - brad barton - 04-04-2007, 10:50
Koni FSD Shocks - Don Bradner - 04-04-2007, 11:09
Koni FSD Shocks - david brady - 04-04-2007, 11:17
Koni FSD Shocks - david brady - 04-04-2007, 11:18
Koni FSD Shocks - Don Bradner - 04-04-2007, 11:23
Koni FSD Shocks - david brady - 04-04-2007, 11:36
Koni FSD Shocks - david brady - 04-04-2007, 11:41
Koni FSD Shocks - Don Bradner - 04-04-2007, 11:58
Koni FSD Shocks - david brady - 04-04-2007, 14:01
Koni FSD Shocks - Dan - 04-04-2007, 14:28
Koni FSD Shocks - Don Bradner - 04-04-2007, 14:51
Koni FSD Shocks - David Brady - 04-04-2007, 14:55
Koni FSD Shocks - Dan - 04-04-2007 20:43
Koni FSD Shocks - Larry - 04-05-2007, 01:31
Koni FSD Shocks - David Brady - 04-12-2007, 11:38
Koni FSD Shocks - brad barton - 04-12-2007, 13:52
Koni FSD Shocks - waynekotila - 05-12-2010, 10:55
Koni FSD Shocks - Don Bradner - 05-12-2010, 16:49
Koni FSD Shocks - Wayne Kotila - 05-13-2010, 02:50
Koni FSD Shocks - Don Bradner - 05-13-2010, 04:03
Koni FSD Shocks - Wayne Kotila - 05-13-2010, 04:21
Koni FSD Shocks - HANK - 05-13-2010, 10:15
Koni FSD Shocks - Don Bradner - 05-13-2010, 11:14



User(s) browsing this thread: 1 Guest(s)