Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
sporlan valve
08-22-2006, 05:00
Post: #13
sporlan valve
What is a ball man valve?
Thanks

--- Gregory OConnor wrote:

> The S valve needs pressure to close and with the
> system is not used
> or pressurized it floats open. The works get
> scummed up and they
> need a cleaning. For a quick fix I hook up to high
> pressure city,
> run the outside hand wash sink and try and close
> the e-fill switch
> off. ( others will warn you that this may cause pipe
> dammage and my
> sporlan is a little clogged up) .
>
> To check if the e switch and selonoid are working,
> turn it on, go
> under the bed, unscrew the e selonoid and pick it up
> and down, you
> should feel the magnetic pull. If all that is
> working simply remove
> the other four (4?) screws open the valve and clean
> the guts with
> bathroom cleaner. If you replace the valve replumb
> it to hold a ball
> man valve also. ( the man valve is good to use on
> the road if the
> sporlan or when the sporlan gets scummed once
> again)
> Gregory O'Connor
> 94ptRomolandCa . --- In
> WanderlodgeForum@yahoogroups.com, "Dan
> Saari" wrote:
> >
> >
> > On my return from Colorado this week I had a
> problem with my water
> > system... lifted the bed to get at the sporlan
> valve to tap it and
> was
> > not able to get it to work correctly.... My
> question is where can I
> get
> > a new one as I called Blue Bird parts and the tech
> Dept. and
> neither
> > has called me back.... I believe it;s the sporlan
> valve as it has
> been
> > giving me problems and now it won't move at all...
> I think its
> stuck
> > half open and half closed cause on city water it
> continues to fill
> the
> > tank with vary little pressure in the coach ...
> when I try the
> coach
> > pump ( it is working ) there is no pressure cause
> with the valve
> half
> > open it just bypasses the valve.... I have flicked
> the valve switch
> on
> > and off and it will not work.......So where can I
> get one ???
> little
> > help here please DAN
> >
> > 92 WLWB 40ft.
> > Depere Wi./ Summerfield Fl.
> > 920-915-3777 it's for sale w/ rebuilt motor
> >
>
>
>
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quote this message in a reply
Post Reply 


Messages In This Thread
sporlan valve - erniecarpet@... - 08-16-2006, 20:51
sporlan valve - Dan Saari - 08-17-2006, 00:30
sporlan valve - pattypape - 08-17-2006, 00:49
sporlan valve - Tom Warner - 08-17-2006, 01:18
sporlan valve - Rob Robinson - 08-17-2006, 01:42
sporlan valve - Jeff Miller - 08-17-2006, 02:13
sporlan valve - Stephen - 08-17-2006, 02:28
sporlan valve - davidkerryedwards - 08-17-2006, 02:29
sporlan valve - Gregory OConnor - 08-17-2006, 03:48
sporlan valve - Rick B - 08-17-2006, 04:22
sporlan valve - Stephen Birtles - 08-17-2006, 05:29
sporlan valve - Stephen Birtles - 08-17-2006, 16:18
sporlan valve - nelson slinkman - 08-22-2006 05:00
sporlan valve - Gregory OConnor - 08-22-2006, 16:57
sporlan valve - Gregory OConnor - 08-22-2006, 16:58
sporlan valve - Ernest Ekberg - 09-21-2006, 13:24
sporlan valve - davidkerryedwards - 09-21-2006, 13:42
sporlan valve - Bob Lawrence - 09-21-2006, 14:11
sporlan valve - Curt Sprenger - 02-17-2007, 09:42
sporlan valve - Terry Neal - 02-17-2007, 09:52
sporlan valve - Wilhelmus Schreurs - 02-17-2007, 10:16
sporlan valve - Terry Neal - 02-17-2007, 10:29
sporlan valve - Curt Sprenger - 02-18-2007, 04:45
sporlan valve - Wilhelmus Schreurs - 02-18-2007, 05:40
sporlan valve - Richard Hayden - 02-18-2007, 05:56
sporlan valve - Curt Sprenger - 02-18-2007, 06:35
sporlan valve - williamcharrison - 07-05-2010, 03:49
sporlan valve - Wayne Kotila - 07-05-2010, 07:38
sporlan valve - waynekotila - 07-07-2010, 10:13
sporlan valve - Mike - 10-02-2010, 03:54
sporlan valve - Ralph L. Fullenwider - 10-02-2010, 04:01
sporlan valve - Mike - 10-02-2010, 06:52
sporlan valve - oceanshores98569 - 10-02-2010, 12:38
sporlan valve - Ralph L. Fullenwider - 10-02-2010, 16:08



User(s) browsing this thread: 1 Guest(s)