Member Funded
Link Directory
Wanderlodge Trader
Document Library
User Locations
Gallery
Calendar
Wanderlodge Gurus - The Member Funded Wanderlodge Forum
/
Yahoo Groups Archive
/
WanderlodgeForum 
/
Low voltage out of Genset
/
Low voltage out of Genset
|
Low voltage out of Genset
|
|
08-22-2006, 04:37
Post: #3
|
|||
|
|||
|
Low voltage out of Genset
I'd suggest using a Hertz meter as well. You don't want to move the
Hz too far from 60 as it can adversely affect motors, etc. Pete Masterson aeonix1@... '95 Bluebird Wanderlodge WBDA 4203 El Sobrante, CA On Aug 22, 2006, at 8:14 AM, Curt Sprenger wrote: > I'm not an expert but found this on the Internet. For an > oscillating or > varying current, frequency is the number of complete cycles per second > in alternating current direction. The standard unit of frequency is > the > hertz, abbreviated Hz. If a current completes one cycle per second, > then > the frequency is 1 Hz; 60 cycles per second equals 60 Hz (the standard > alternating-current utility frequency in the United States). > > I recall the Onan guy adjusting rpms on our previous gen. set to > get the > frequency to 60 and to increase voltage. > > Sounds to me you are on the right track. If you can, turn up the rpms > and watch for voltage increase. Good luck. Please keep us posted. > > Curt Sprenger 1987 PT38, Anaheim Hills, Calif. > > > > Alan wrote: > >> My 87FC35 has a 8.0 kW genset. I am getting low voltage out of it >> (around 95 volts). On my last onan genset (77 GMC - carbed gas), >> this was a common problem and was simply corrected by increasing >> RPMs. (If this is the fix, how do I adjust idle speed? This fuel >> injection isn't as intuitive for me as I've been a carburetor guy.) >> >> I found an installation manual for the genset and it says to adjust >> some "taps" on a transformer regulator. It also says "output >> frequency is determined by engine speed and normally does not >> require adjustment." I'm not exactly sure what it means by "output >> frequency". Is that voltage?? >> >> Is this problem more complicated than adjusting the RPMs? Maybe I >> don't have one of the Onan manuals..?? I have a parts manual and an >> installation manual. >> >> I have searched the forums and did not find a post that seemed to >> address my situation. Let me know if I missed it. >> >> Thanks in advance, >> Alan Johnson >> 87FC35 >> >> > > > > > Yahoo! Groups Links > > > > > > [Non-text portions of this message have been removed] |
|||
|
![[+]](http://www.wanderlodgegurus.com/images/collapse_collapsed.gif)
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Low voltage out of Genset - Alan - 08-21-2006, 16:18
Low voltage out of Genset - Curt Sprenger - 08-22-2006, 03:14
Low voltage out of Genset - Pete Masterson - 08-22-2006 04:37
Low voltage out of Genset - Wilhelmus Schreurs - 08-22-2006, 05:02
Low voltage out of Genset - one_dusty_hoot - 08-22-2006, 06:47
Low voltage out of Genset - one_dusty_hoot - 08-22-2006, 07:06
Low voltage out of Genset - John Suter - 08-22-2006, 09:58
Low voltage out of Genset - Bruce Morris - 08-22-2006, 15:28
Low voltage out of Genset - one_dusty_hoot - 08-22-2006, 15:39
Low voltage out of Genset - Alan - 08-22-2006, 16:38
Low voltage out of Genset - John Suter - 08-22-2006, 23:20
Low voltage out of Genset - one_dusty_hoot - 08-23-2006, 03:56
Low voltage out of Genset - pattypape - 08-23-2006, 05:18
Low voltage out of Genset - Ralph L. Fullenwider - 08-23-2006, 05:34
Low voltage out of Genset - The Squires - 08-23-2006, 05:36
Low voltage out of Genset - Alan Johnson - 08-23-2006, 06:34
Low voltage out of Genset - John Suter - 08-23-2006, 06:42
Low voltage out of Genset - Stephen Birtles - 08-23-2006, 06:52
Low voltage out of Genset - erniecarpet@... - 08-23-2006, 08:06
Low voltage out of Genset - Alan Johnson - 08-23-2006, 08:31
Low voltage out of Genset - one_dusty_hoot - 08-23-2006, 10:30
Low voltage out of Genset - one_dusty_hoot - 08-23-2006, 12:31
Low voltage out of Genset - Gardner Yeaw - 08-23-2006, 12:37
Low voltage out of Genset - Wilhelmus Schreurs - 08-23-2006, 17:58
Low voltage out of Genset - John Suter - 08-24-2006, 03:58
Low voltage out of Genset - Alan Johnson - 08-24-2006, 16:14
|
User(s) browsing this thread: 1 Guest(s)