Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Microwave
12-28-2006, 05:10
Post: #1
Microwave
Hi Fellows,
I am looking at replacing my Sharp Microwave the Sharp replacement that fits the
opening best looks to be the R-930AK. I have read where folks are having some
problems with the R-930. Have any of you used this model and have you had any
problems.
Also have you used other brand units to replace the Sharp.
Thanks to all.
Howard Truitt
Camilla, Ga.
"Sowega"
86 PT40


[Non-text portions of this message have been removed]
Quote this message in a reply
12-28-2006, 06:45
Post: #2
Microwave
Howard,

I replaced our Sharp Micro/convection with a GE #JE1590SH.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



Howard O. Truitt wrote:

>Hi Fellows,
>I am looking at replacing my Sharp Microwave the Sharp replacement that fits
the opening best looks to be the R-930AK. I have read where folks are having
some problems with the R-930. Have any of you used this model and have you had
any problems.
>Also have you used other brand units to replace the Sharp.
>Thanks to all.
>Howard Truitt
>Camilla, Ga.
>"Sowega"
> 86 PT40
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
Quote this message in a reply
12-28-2006, 08:16
Post: #3
Microwave
I am looking for a replacement also and was informed that the table top
microwave/convection ovens should not be enclosed in a cabinet. They require air
space for heat dissipation. The built-in microwaves have a fan and shroud to
remove the heat. I recall one member mentioning that they vented the heat with
a fan thru the cooktop heat vent. Unfortunately all the built-in
microwave/convection ovens I have found are $700+.

Troy Tikalsky
1986 Newell


----- Original Message -----
From: Howard O. Truitt
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 28, 2006 11:10 AM
Subject: [WanderlodgeForum] Microwave


Hi Fellows,
I am looking at replacing my Sharp Microwave the Sharp replacement that fits
the opening best looks to be the R-930AK. I have read where folks are having
some problems with the R-930. Have any of you used this model and have you had
any problems.
Also have you used other brand units to replace the Sharp.
Thanks to all.
Howard Truitt
Camilla, Ga.
"Sowega"
86 PT40

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Quote this message in a reply
12-28-2006, 08:23
Post: #4
Microwave
Thanks Curt

----- Original Message -----
From: Curt Sprenger
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 28, 2006 1:45 PM
Subject: Re: [WanderlodgeForum] Microwave


Howard,

I replaced our Sharp Micro/convection with a GE #JE1590SH.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.

Howard O. Truitt wrote:

>Hi Fellows,
>I am looking at replacing my Sharp Microwave the Sharp replacement that fits
the opening best looks to be the R-930AK. I have read where folks are having
some problems with the R-930. Have any of you used this model and have you had
any problems.
>Also have you used other brand units to replace the Sharp.
>Thanks to all.
>Howard Truitt
>Camilla, Ga.
>"Sowega"
> 86 PT40
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>





------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.29/607 - Release Date: 12/28/2006


[Non-text portions of this message have been removed]
Quote this message in a reply
12-28-2006, 09:54
Post: #5
Microwave
Is it hard to gut a microwave and just refit the old unit with new
gismo's????? I had that done at a shade tree appliance shop for
$75.00 but don't know what was done other than it worked after the
repair.
GregoryO'Connor
94ptRomolandCa--- In WanderlodgeForum@yahoogroups.com, "Troy
Tikalsky" wrote:
>
> I am looking for a replacement also and was informed that the table
top microwave/convection ovens should not be enclosed in a cabinet.
They require air space for heat dissipation. The built-in microwaves
have a fan and shroud to remove the heat. I recall one member
mentioning that they vented the heat with a fan thru the cooktop heat
vent. Unfortunately all the built-in microwave/convection ovens I
have found are $700+.
>
> Troy Tikalsky
> 1986 Newell
>
>
> ----- Original Message -----
> From: Howard O. Truitt
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thursday, December 28, 2006 11:10 AM
> Subject: [WanderlodgeForum] Microwave
>
>
> Hi Fellows,
> I am looking at replacing my Sharp Microwave the Sharp
replacement that fits the opening best looks to be the R-930AK. I
have read where folks are having some problems with the R-930. Have
any of you used this model and have you had any problems.
> Also have you used other brand units to replace the Sharp.
> Thanks to all.
> Howard Truitt
> Camilla, Ga.
> "Sowega"
> 86 PT40
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
12-28-2006, 10:34
Post: #6
Microwave
I replaced my original Sharp with the 930 a month or two ago. Easy
installation. Used the correct install kit from Sharp but after I
received it I believe I could have used the original install kit.
So far it works great and looks good. I think that the best price I
found was thru beveragefactory.com. Hope this helps. Mike McMahan
1989 PT40


--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Hi Fellows,
> I am looking at replacing my Sharp Microwave the Sharp replacement
that fits the opening best looks to be the R-930AK. I have read
where folks are having some problems with the R-930. Have any of you
used this model and have you had any problems.
> Also have you used other brand units to replace the Sharp.
> Thanks to all.
> Howard Truitt
> Camilla, Ga.
> "Sowega"
> 86 PT40
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
12-28-2006, 11:39
Post: #7
Microwave
Thanks Mike

----- Original Message -----
From: Mike McMahan
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 28, 2006 5:34 PM
Subject: [WanderlodgeForum] Re: Microwave




I replaced my original Sharp with the 930 a month or two ago. Easy
installation. Used the correct install kit from Sharp but after I
received it I believe I could have used the original install kit.
So far it works great and looks good. I think that the best price I
found was thru beveragefactory.com. Hope this helps. Mike McMahan
1989 PT40

--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Hi Fellows,
> I am looking at replacing my Sharp Microwave the Sharp replacement
that fits the opening best looks to be the R-930AK. I have read
where folks are having some problems with the R-930. Have any of you
used this model and have you had any problems.
> Also have you used other brand units to replace the Sharp.
> Thanks to all.
> Howard Truitt
> Camilla, Ga.
> "Sowega"
> 86 PT40
>
>
> [Non-text portions of this message have been removed]
>






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.29/607 - Release Date: 12/28/2006


[Non-text portions of this message have been removed]
Quote this message in a reply
12-28-2006, 14:45
Post: #8
Microwave
I replaced mine with a GE JES1290 micro/conv. combo...a little
smaller..ended up with a 2 in. gap on three sides.
Finally air gets to circulate out instead on being forced into the hall
closet.
Cost was $257.00 at Lowes.
Wife likes it so I am happy.
Bob Lawrence
84 PT36
Tacoma, Wa. (Where my work truck was stolen this morning at the gas
station while refueling...Sad
>
> Hi Fellows,
> I am looking at replacing my Sharp Microwave the Sharp replacement
that fits the opening best looks to be the R-930AK. I have read where
folks are having some problems with the R-930. Have any of you used
this model and have you had any problems.
> Also have you used other brand units to replace the Sharp.
> Thanks to all.
> Howard Truitt
> Camilla, Ga.
> "Sowega"
> 86 PT40
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
12-28-2006, 17:17
Post: #9
Microwave
Now did you pay for the fuel? He stole that too, dern!
Interesting? Suppose a person fills up his tank,
he goes to the register to pay and someone steals his
vehicle, who owes for the stolen fuel? Maybe as soon
as the nozzle starts flowing fuel in you tank, you
are presumed to pay for it regardless?? Well!, doggies!!
I hope you got your truck back undamaged, full of fuel too.

bob janes, greenville, sc



--- In WanderlodgeForum@yahoogroups.com, "Bob Lawrence"
wrote:
>
> I replaced mine with a GE JES1290 micro/conv. combo...a little
> smaller..ended up with a 2 in. gap on three sides.
> Finally air gets to circulate out instead on being forced into the
hall
> closet.
> Cost was $257.00 at Lowes.
> Wife likes it so I am happy.
> Bob Lawrence
> 84 PT36
> Tacoma, Wa. (Where my work truck was stolen this morning at the gas
> station while refueling...Sad
> >
> > Hi Fellows,
> > I am looking at replacing my Sharp Microwave the Sharp
replacement
> that fits the opening best looks to be the R-930AK. I have read
where
> folks are having some problems with the R-930. Have any of you used
> this model and have you had any problems.
> > Also have you used other brand units to replace the Sharp.
> > Thanks to all.
> > Howard Truitt
> > Camilla, Ga.
> > "Sowega"
> > 86 PT40
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
Quote this message in a reply
12-28-2006, 18:01
Post: #10
Microwave
Thanks Bob and sorry about the truck.
Howard Truitt
Camilla, Ga.
"Sowega"
86 PT40

----- Original Message -----
From: Bob Lawrence
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 28, 2006 9:45 PM
Subject: [WanderlodgeForum] Re: Microwave


I replaced mine with a GE JES1290 micro/conv. combo...a little
smaller..ended up with a 2 in. gap on three sides.
Finally air gets to circulate out instead on being forced into the hall
closet.
Cost was $257.00 at Lowes.
Wife likes it so I am happy.
Bob Lawrence
84 PT36
Tacoma, Wa. (Where my work truck was stolen this morning at the gas
station while refueling...Sad
>
> Hi Fellows,
> I am looking at replacing my Sharp Microwave the Sharp replacement
that fits the opening best looks to be the R-930AK. I have read where
folks are having some problems with the R-930. Have any of you used
this model and have you had any problems.
> Also have you used other brand units to replace the Sharp.
> Thanks to all.
> Howard Truitt
> Camilla, Ga.
> "Sowega"
> 86 PT40
>
>
> [Non-text portions of this message have been removed]
>






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.29/607 - Release Date: 12/28/2006


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)