Dump Valve Rebuild?

[Terry Neal]

Only after you cut the output pipe, downstream from the valve. Your
valve should be glued into the tank adapter. Mine was. Jeff covered
how to get it out with a cutting bit on a Dremel tool.

Terry Neal
Bozeman, MT
82PT40 6V92TA
74FC34 6V53T



Keith Strehle wrote:

> Will the adapter turn independent of the valve and piping? Like a
> pipe union fitting?
>
> --- In WanderlodgeForum@yahoogroups.com
> , Terry Neal wrote:
> >
> > Keith, you should contact Jeff Miller at Dupree Products
> > (616.355.9811). He owns Dupree now & has the valves in stock as
> well as
> > all the rebuild parts. Also,. you can upgrade to air valves if
> that
> > interests you? The bodies are glued into the tank adapter. If you
> get
> > lucky, the adapter that screws into the tank will turn out easily.
> If
> > not, you have the cut the fitting out of the tank & glue a new one
> in.
> >
> > Terry Neal
> > Bozeman, MT
> > 82PT40 6V92TA
> > 74FC34 6V53T
> >
> >
> > Keith Strehle wrote:
> >
> > > The next item on the list is the dump valves. They are the twist
> lock
> > > type and appear to be original equipment. The look just like the
> Dupree
> > > valves? Are there knockoffs out there? Are the valve bodies glued
> in?
> > > If they are Dupree valves, should I rebuild or replace the gate
> > > assembly?
> > >
> > > Thanks, Keith
> > >
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>



[Non-text portions of this message have been removed]