Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tools and Fixit Stuff
05-20-2007, 13:05
Post: #19
Tools and Fixit Stuff
use a 13mm on a half inch head you end up with bruised knuckles
12mm is the proper size. It is coincidentally the most important
wrench in the collection
The famous half inch that fits almost every lawnmower in the world and
when you lose it just use the equally famous 12mm wrench luckily most
modern tools sets sold today come with one of each
So you can misplace twice as many tools
Stephen 77fc35 reposted with half the spelling mistakes


--- In WanderlodgeForum@yahoogroups.com, Pete Masterson
wrote:
>
> I have both English and metric tools... often the metric will fit a
> slightly damaged English measure nut... and in other cases, the fit
> is 'close enouogh' e.g. 13mm = 1/2 inch. And, as mentioned, the
> generator may have a Japanese engine (in my case a Kubota). Some of
> the appliances inside may also be Japanese or otherwise use metric
> measure bolts/nuts etc.
>
> A volt meter or multi-meter (learn how to use it) is indispensable.
> Low voltage is a frequent symptom that causes various difficulties.
>
> Pete Masterson
> '95 Blue Bird Wanderlodge WBDA 42
> aeonix1@...
> On the road at Lockhart Texas
>
>
>
> On May 20, 2007, at 7:05 PM, Rob Robinson wrote:
>
> > Metric tools do apply in some cases. I notice that there are a lot
> > of metric
> > nuts and bolts on my Kubota powered generator. I recently replaced
> > the genny
> > water pump, fan belt, thermostat, idler pulley with mostly metric
> > wrenches.
> >
> > On 20/05/07, runnerful wrote:
> >>
> >> Hi Curt,
> >>
> >> --- In WanderlodgeForum@yahoogroups.com > >> 40yahoogroups.com>,
> >> Curt Sprenger
> >> wrote:
> >>>
> >>> Ginger,
> >>>
> >>> The Bluebird Options List for 1987 is on its way to you.
> >>
> >> Got it! Thanks. :-)
> >>>
> >>> Yes, some tools should be carried, screwdrivers of various
> >>> lengths.sizes, pliers, 1/4" drive socket set with shallow and deep
> >>> sockets,
> >>
> >> I assume metric tools need not apply?
> >> <snip>
>
> >> Yes, I hear mention of the voltmeter frequently hearabouts.
> <snip>
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Tools and Fixit Stuff - msecoolcal@... - 05-20-2007, 05:26
Tools and Fixit Stuff - runnerful - 05-20-2007, 06:16
Tools and Fixit Stuff - bubblerboy64 - 05-20-2007, 07:29
Tools and Fixit Stuff - Curt Sprenger - 05-20-2007, 08:14
Tools and Fixit Stuff - Wilhelmus Schreurs - 05-20-2007, 08:51
Tools and Fixit Stuff - Pete Masterson - 05-20-2007, 08:56
Tools and Fixit Stuff - Rob Robinson - 05-20-2007, 09:00
Tools and Fixit Stuff - Stephen Birtles - 05-20-2007, 09:14
Tools and Fixit Stuff - Wilhelmus Schreurs - 05-20-2007, 09:39
Tools and Fixit Stuff - runnerful - 05-20-2007, 10:43
Tools and Fixit Stuff - runnerful - 05-20-2007, 11:01
Tools and Fixit Stuff - Stephen Birtles - 05-20-2007, 11:48
Tools and Fixit Stuff - Rob Robinson - 05-20-2007, 12:05
Tools and Fixit Stuff - Gardner Yeaw - 05-20-2007, 12:12
Tools and Fixit Stuff - runnerful - 05-20-2007, 12:27
Tools and Fixit Stuff - Pete Masterson - 05-20-2007, 12:43
Tools and Fixit Stuff - Gardner Yeaw - 05-20-2007, 13:00
Tools and Fixit Stuff - Stephen Birtles - 05-20-2007, 13:04
Tools and Fixit Stuff - Stephen Birtles - 05-20-2007 13:05
Tools and Fixit Stuff - Curt Sprenger - 05-20-2007, 13:26
Tools and Fixit Stuff - Leroy Eckert - 05-20-2007, 13:27
Tools and Fixit Stuff - brad barton - 05-20-2007, 16:09
Tools and Fixit Stuff - Curt Sprenger - 05-20-2007, 16:25
Tools and Fixit Stuff - Gregory OConnor - 05-20-2007, 16:27
Tools and Fixit Stuff - Curt Sprenger - 05-20-2007, 16:56
Tools and Fixit Stuff - Gregory OConnor - 05-20-2007, 16:59
Tools and Fixit Stuff - g - 05-20-2007, 17:18
Tools and Fixit Stuff - brad barton - 05-21-2007, 00:34
Tools and Fixit Stuff - Pete Masterson - 05-21-2007, 01:59
Tools and Fixit Stuff - jim riordan - 05-21-2007, 03:53
Tools and Fixit Stuff - jim riordan - 05-21-2007, 04:17
Tools and Fixit Stuff - Pete Masterson - 05-21-2007, 05:33
Tools and Fixit Stuff - erniecarpet@... - 05-21-2007, 06:15
Tools and Fixit Stuff - keyriffic - 05-21-2007, 06:46
Tools and Fixit Stuff - jim riordan - 05-21-2007, 07:49
Tools and Fixit Stuff - Stephen Birtles - 05-21-2007, 09:04
Tools and Fixit Stuff - runnerful - 05-21-2007, 10:12
Tools and Fixit Stuff - runnerful - 05-21-2007, 11:04
Tools and Fixit Stuff - Gardner Yeaw - 05-21-2007, 14:41
Tools and Fixit Stuff - runnerful - 05-22-2007, 02:47
Tools and Fixit Stuff - runnerful - 05-22-2007, 03:14
Tools and Fixit Stuff - runnerful - 05-22-2007, 03:24
Tools and Fixit Stuff - runnerful - 05-22-2007, 03:27
Tools and Fixit Stuff - runnerful - 05-22-2007, 03:33
Tools and Fixit Stuff - Wilhelmus Schreurs - 05-22-2007, 03:49
Tools and Fixit Stuff - Pete Masterson - 05-22-2007, 06:10
Tools and Fixit Stuff - Pete Masterson - 05-22-2007, 06:20
Tools and Fixit Stuff - runnerful - 05-22-2007, 07:16
Tools and Fixit Stuff - Leroy Eckert - 05-22-2007, 09:16



User(s) browsing this thread: 1 Guest(s)