Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Generator Fan Motor
06-23-2008, 22:58
Post: #10
Generator Fan Motor
Paul,

If you look closely there may be a label that states,
"Oil every 3 months", I think this is pretty funny.

The Grainger parts that I used on an Onan, I believe are the same,
So check out these Grainger numbers. It is a 208 Volt three speed
motor, then hard wire the highest speed.

motor 208V 4M099
Starting Capacitor 2GE76
Squirrel Cage Blower 4C592

I replaced the Wheel and blower because it was old, out of balance
and I damaged it trying to remove the motor.

Bill 88 FC Michigan



--- In WanderlodgeForum@yahoogroups.com, "P & D" wrote:
>
> When I checked it while it was installed there was 220 volts
getting to the
> motor.
>
>
>
> Has anyone replaced and where did they find the motor. Mine has a
part
> number of 5KCP39KG3186S and on grainger there is one that is close,
but does
> not have the same mounting.
>
>
>
> Thanks again for all the help
>
>
>
> Paul
>
> 1987 PT38
>
> Hesperia CA
>
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Wilhelmus
Schreurs
> Sent: Monday, June 23, 2008 8:34 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] Re: Generator Fan Motor
>
>
>
> Paul:
> If your windings on your motor were no good, I would doubt that the
> capacitor would keep it running that long.
> Since I am not near my coach, I think that the motor is 240 volts.
Why not
> check it from house supply?
>
>
>
> Bill 84 FC 35 SB "$quanderlodge"
> Terrace, B.C. Canada
>
>
>
>
>
> ----- Original Message ----
> From: P & D
> To: WanderlodgeForum@yahoogroups.com
> Sent: Monday, June 23, 2008 8:22:01 PM
> Subject: RE: [WanderlodgeForum] Re: Generator Fan Motor
>
> Update on generator fan
>
>
>
> I checked voltage and had voltage on both sides of cap and going to
the
> motor. I replaced the run capacitor and it did not start. I gave
it a
> small push start and it started turning and ran for 5-10 minutes
then came
> to a stop.
>
>
>
> I had a 50/50 chance that I would be that lucky. I pulled squireel
cage
> assembly out and put it on the workbench. From the time that I had
run the
> generator to the time I got unit to my work bench was an 1.5 hours,
and the
> motor case was still very hot, so it makes me think there is
something wrong
> with the windings in the motor, so I will be out looking for a new
motor.
>
>
>
> Paul
>
> 1987 PT38
>
> Hesperia, ca
>
>
>
> _____
>
>
>
> .
>
>
>
>
>
> _____
>
> Now with a new friend-happy design! Try the new
> <http://ca.beta.messenger.yahoo.com/> Yahoo! Canada Messenger
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Generator Fan Motor - ppotter14950 - 06-22-2008, 07:21
Generator Fan Motor - Leroy Eckert - 06-22-2008, 08:13
Generator Fan Motor - ronmarabito2002 - 06-22-2008, 13:32
Generator Fan Motor - Wilhelmus Schreurs - 06-23-2008, 01:02
Generator Fan Motor - Fred Hulse - 06-23-2008, 01:34
Generator Fan Motor - P & D - 06-23-2008, 15:22
Generator Fan Motor - Wilhelmus Schreurs - 06-23-2008, 15:34
Generator Fan Motor - P & D - 06-23-2008, 15:51
Generator Fan Motor - Curt Sprenger - 06-23-2008, 17:00
Generator Fan Motor - pattypape - 06-23-2008 22:58
Generator Fan Motor - Leroy Eckert - 06-23-2008, 23:48
Generator Fan Motor - putneyflash@... - 06-24-2008, 00:12
Generator Fan Motor - Don Bradner - 06-24-2008, 05:15
Generator Fan Motor - Pete Masterson - 06-24-2008, 05:39
Generator Fan Motor - P & D - 06-24-2008, 14:22
Generator Fan Motor - roncan1842@... - 07-03-2008, 11:55



User(s) browsing this thread: 3 Guest(s)