HWH jack wont extend, 94pt

[Gardner Yeaw]

Gregory,
Don't forget when the rear wheels come off the ground the bus can
roll since the spring brakes are on the rear wheels only. Be sure
you have really big and strong wheel chocks on the front. Not those
cheesy stamped steel ones.

Gardner
83FC35
--- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor"
wrote:
>
> I was preping my bus for radiator removal/rodding and new
compressor
> cooling lines today and I jacked the jack. I attempted to lift the
> back end using two 8x8 timbers under the jack pads to gain some
> height for frame jacksstands. the drivers side timber abruptly
rolled
> a bit in the gravel so I decided to drop the bus and use wider
blocks
> under the pads. the jacks retracted and I was never able to get
the
> drive/rear jack to extend once again?
>
> The 94 hwh control pad only allow you to choose a pair of jacks or
> auto level ;Both front ;both back ;both left ;both right or auto
> level. I tried every combination to extend Drive/rear jack, no
luck.
>
> I wonder if I Knocked a sensor loose on the jack or confused the
hwh
> computer?
>
> GregoryO'Connor
> 94ptRomolandCa
>