Radiator Screens

[mariopatti1]

Hi Guy's
Looking to replace the screens in front of the radiator on a 85FC35 .
Any source available ??
Mario 1985FC35 Carlsbad CA.
Anyone interested in a nice 1985FC...That 95 sure looks nice..

[timvasqz]

Mario, you might find someone to make dublicate copies with close to
the same fabric look but stronger. I would go to a commercial welding
supply in an industrial area like Escondido or Vista and ask the sales
clerk who could make one (Carlsbad is full of Surfers and StarBucks,
Ok if you need board wax or coffee).
Might be easy to craft one with a more ridgid stainless fabric screen
and a frame of stock alumnium???? I think a screen that could be
plasma cut to shape and stand without a frame would require no ardious
crafted $$$ frame support. then an alumnium stock trim could be bent
into shape to cover the trim cuts and duplicate the look???????

Escondido Metals has stacks of rem junk for sale. You may find rem
stainless fabric for less than $20. Jarid? 1-760-747-3332 off Mission
near the 15


GregoryO'Connor of Tim&Greg
94ptCa



--- In WanderlodgeForum@yahoogroups.com, "mariopatti1"
wrote:
>
> Hi Guy's
> Looking to replace the screens in front of the radiator on a 85FC35 .
> Any source available ??
> Mario 1985FC35 Carlsbad CA.
> Anyone interested in a nice 1985FC...That 95 sure looks nice..
>

[mariopatti1]

Hi Guys
Thanks for the info..I'm going to try Escondido Metals..
Carlsbad Starbucks surfers and golf no screen shops.
Mario 1985FC35 in Carlsbad BB in Vista

--- In WanderlodgeForum@yahoogroups.com, "timvasqz" wrote:
>
> Mario, you might find someone to make dublicate copies with close
to
> the same fabric look but stronger. I would go to a commercial
welding
> supply in an industrial area like Escondido or Vista and ask the
sales
> clerk who could make one (Carlsbad is full of Surfers and
StarBucks,
> Ok if you need board wax or coffee).
> Might be easy to craft one with a more ridgid stainless fabric
screen
> and a frame of stock alumnium???? I think a screen that could be
> plasma cut to shape and stand without a frame would require no
ardious
> crafted $$$ frame support. then an alumnium stock trim could be
bent
> into shape to cover the trim cuts and duplicate the look???????
>
> Escondido Metals has stacks of rem junk for sale. You may find
rem
> stainless fabric for less than $20. Jarid? 1-760-747-3332 off
Mission
> near the 15
>
>
> GregoryO'Connor of Tim&Greg
> 94ptCa
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "mariopatti1"
> wrote:
> >
> > Hi Guy's
> > Looking to replace the screens in front of the radiator on a
85FC35 .
> > Any source available ??
> > Mario 1985FC35 Carlsbad CA.
> > Anyone interested in a nice 1985FC...That 95 sure looks nice..
> >
>