Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Roof Ac Circuit Board
03-08-2009, 08:48
Post: #1
Roof Ac Circuit Board
Hello everyone. I have a Duotherm by Dometic that has stopped working. I think
I have narrowed it down to the circuit board on the unit. I'm thinking that some
of you may be replacing your unit because it doesn't cool enough anymore. I was
hoping that maybe you could throw it my way. My unit was cooling good when it
appeared that I lost electrical power. If I can bring it back to life by
replacing the circuit board, It will save me from having to purcahse a new unit.

The circuit board is held in place by four small screws. It has a ribbon with
an 11 pin connector soldered to the board. It is not difficult to remove from
the unit. I would be willing to pay for it and certainly pay for shipping.

Thanks for any help.

Gus Rodriguez
89pt40 8v92
Pearland, Tx
Quote this message in a reply
03-08-2009, 16:36
Post: #2
Roof Ac Circuit Board
Gus,

What model do you have? I have an old Dometic Penguin SL135 unit I replaced
with a new Penguin low profile.

Glenn

1986 PT40
Marietta, GA
Quote this message in a reply
03-09-2009, 11:23
Post: #3
Roof Ac Circuit Board
--- In WanderlodgeForum@yahoogroups.com, "Glenn Allen" wrote:
>
> Gus,
>
> What model do you have? I have an old Dometic Penguin SL135 unit I replaced
with a new Penguin low profile.
>
> Glenn
>
> 1986 PT40
> Marietta, GA
>
Glenn, I have Duotherm Dometic Model number 610115.103. It may be the original.
There are alot of other numbers on the name plate describing compressor. freon
capacity, etc. but no simple model number.

Thanks for the reply,

Gus

89pt40 8v92
Pearland, Tx
Quote this message in a reply
03-11-2009, 03:04
Post: #4
Roof Ac Circuit Board
Gus,

You definitely have a different model. I don't believe the control boards are
the same.

Glenn
1986 PT40
Marietta, GA

--- In WanderlodgeForum@yahoogroups.com, "gus2rod" wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "Glenn Allen" wrote:
> >
> > Gus,
> >
> > What model do you have? I have an old Dometic Penguin SL135 unit I replaced
with a new Penguin low profile.
> >
> > Glenn
> >
> > 1986 PT40
> > Marietta, GA
> >
> Glenn, I have Duotherm Dometic Model number 610115.103. It may be the
original. There are alot of other numbers on the name plate describing
compressor. freon capacity, etc. but no simple model number.
>
> Thanks for the reply,
>
> Gus
>
> 89pt40 8v92
> Pearland, Tx
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)