Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12 VOLT VOLTAGE DROP CHART
07-11-2009, 07:30
Post: #1
12 VOLT VOLTAGE DROP CHART
Hi
For those olf you concerned about voltage drop, use this handy link and learn about 10% and 3% critical voltage drop
Gary
http://www.marinco.com/page/wire-tech-data

--- On Thu, 7/9/09, David Josephson wrote:
From: David Josephson
Subject: [WanderlodgeForum] Re: 12v power for portable macerator pump
To: WanderlodgeForum@yahoogroups.com
Date: Thursday, July 9, 2009, 4:35 PM



We have equipped a couple of coaches over the years with the Jabsco

macerator pump. It is very sensitive to voltage drop -- it really wants

at least 12 volts at the terminals, otherwise it stalls very easily. We

also strictly limit TP usage when we're going to use it (single ply

only, and try not to wad it up tightly when you toss). Running 10 gauge

wire from the batteries versus 14 gauge through a nearby circuit made

the difference in many cases between running or not. When first

installed, the coach or genset needed to be running (~14 volts at the

battery), now it works fine from a charged battery bank (12.3 - 12.8 V).

Cigarette lighter plugs are out -- too much resistance.



Now we are in the process of standardizing on a 12 volt outlet. The

solar house people use NEMA 6-15 plugs and outlets for 12V, we might use

those or 6-20. These look like regular 120 volt plugs but at least one

of the blades is sideways (intended for 240 volts).



--

David Josephson

Santa Cruz, CA

1983 Airstream diesel "Wanderlodge Lite"



--- In WanderlodgeForum@ yahoogroups. com, "Henry Jay Hannigan"

wrote:

>

> Alex:

>

> When I put my DRAINMASTERS on (12volt dump valves), I just connected

into the 12volt overhead light wires....HOWEVER. ..your mixmaster may

require more operating current..... .....BOB LUMAS memmer of this Forum

has one and he knows the answer..

> Regrads,

> Hank

> 90SP36..for sale in Vegas



> --- In WanderlodgeForum@ yahoogroups. com, "Alex Smith" replytoalex@

wrote:

> >

> > Hello to all,

> > I would like to use a portable macerator pump from time to time. Any

help on the best way and from where to tap 12v 20 amp power would be

greatly appreciated! Thanks.

> >



Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)