Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
gen set oil switch
01-02-2010, 12:57
Post: #1
gen set oil switch

My 97 WLWB has a Power Tech Gen,
Just above the starter is an oil pressure switch with a 45 degree pipe adapter and 2 wires.
It is leaking and was hoping someone would have some information on this switch?
Thanks
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41
Quote this message in a reply
01-02-2010, 15:30
Post: #2
gen set oil switch
I think that might be your oil pressure switch Fred. It shuts down the genny when the oil pressure drops too low. I ordered one from Power Tech in Leesburg FL for my 94 two years ago. Randy told me at the time that this pressure switch could be had from various sources. I'd check NAPA


2010/1/2 Fred Hulse <"fhulse@wildblue.net">

 



My 97 WLWB has a Power Tech Gen,
Just above the starter is an oil pressure switch with a 45 degree pipe adapter and 2 wires.
It is leaking and was hoping someone would have some information on this switch?
Thanks
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41




--
Rob, Sue and Joey Robinson
94 WLWB
Quote this message in a reply
01-03-2010, 05:46
Post: #3
gen set oil switch
Oil switches are pretty generic, it just has to be normally open or closed (pick one) and of a general pressure variety. Any switch will work out.
Gary
85 pt-40

--- On Sat, 1/2/10, Rob Robinson wrote:
From: Rob Robinson
Subject: Re: [WanderlodgeForum] gen set oil switch
To: WanderlodgeForum@yahoogroups.com
Date: Saturday, January 2, 2010, 10:30 PM




I think that might be your oil pressure switch Fred. It shuts down the genny when the oil pressure drops too low. I ordered one from Power Tech in Leesburg FL for my 94 two years ago. Randy told me at the time that this pressure switch could be had from various sources. I'd check NAPA


2010/1/2 Fred Hulse <fhulse@wildblue. net>





My 97 WLWB has a Power Tech Gen,
Just above the starter is an oil pressure switch with a 45 degree pipe adapter and 2 wires.
It is leaking and was hoping someone would have some information on this switch?
Thanks
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41




--
Rob, Sue and Joey Robinson
94 WLWB

Quote this message in a reply
01-03-2010, 07:50
Post: #4
gen set oil switch

Rob
Thanks,I found a Power Tech distributor in South Phoenix and will visit them in the morning.
I have removed the old one and the paint on it is hiding any Identification.
I think we will be ok after I see the guy in the parts department tomorrow, if not,there are lots of good part stores on the way home.
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41
Quote this message in a reply
01-03-2010, 07:53
Post: #5
gen set oil switch

Thanks Gary
I have the old out and will be looking around tomorrow.
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)