Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ARO Step control valve
11-15-2010, 17:21
Post: #11
ARO Step control valve
a small amount of modification is needed
notably plugging extra ports
cost 115.00 plus shipping
it can be rebuilt


--- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler" wrote:
>
> Stephen,
>
> Do you have more information?
>
> - Cost?
>
> - Direct replacement or modification required?
>
> - Can it be rebuilt?
>
>
>
>
>
> - Chuck Wheeler-
>
> 1982 FC 31SB Fort Worth TX
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of cape0001
> Sent: Sunday, November 14, 2010 7:06 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: ARO Step control valve
>
>
>
>
>
> We have step control valves
> Stephen 97 bmc 37
> dupree Procucts
>
> --- In WanderlodgeForum@yahoogroups.com
> , "Chuck Wheeler"
> wrote:
> >
> > We developed a bad leak in the ARO step control valve during our trip last
> > weekend. The spool valve was easy to rebuild using "O" rings from the
> > faucet section of ACE hardware (3/4" X 1/8" thick - $0.29 each). The
> problem
> > is that the rubber on the back port of one of the pilot air valves is bad
> so
> > there is a leak when it is energized. There used to be kits available for
> > these valves but I can't find any since IR bought ARO.
> >
> > - Has anyone found any parts to rebuild one of these valves lately?
> >
> > - Or does any one have an old valve around that I could buy for parts?
> >
> > - Or, lastly, does anyone have a part number for a valve that would
> replace
> > the current one? (ARO Part#5840-2929-02)
> >
> >
> >
> > We head north for the holidays and in very cold weather even a small leak
> > creates problems.
> >
> >
> >
> > - Chuck Wheeler-
> >
> > 1982 FC 31SB Fort Worth TX
> >
>
Quote this message in a reply
11-15-2010, 17:28
Post: #12
ARO Step control valve

Give me a call and let’s arrange
shipping. Oh yes, and payment!

- Chuck
Wheeler-

1982 FC 31SB Fort Worth TX



From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of cape0001

Sent: Monday, November 15, 2010
11:22 PM

To: WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] Re:
ARO Step control valve



a small amount of modification is needed

notably plugging extra ports

cost 115.00 plus shipping

it can be rebuilt



--- In "WanderlodgeForum%40yahoogroups.com",
"Chuck Wheeler" wrote:

>

> Stephen,

>

> Do you have more information?

>

> - Cost?

>

> - Direct replacement or modification required?

>

> - Can it be rebuilt?

>

>

>

>

>

> - Chuck Wheeler-

>

> 1982 FC 31SB Fort Worth
TX


>

> _____

>

> From: "WanderlodgeForum%40yahoogroups.com"

> [mailto:"WanderlodgeForum%40yahoogroups.com"]
On Behalf Of cape0001

> Sent: Sunday, November 14, 2010 7:06 PM

> To: "WanderlodgeForum%40yahoogroups.com"

> Subject: [WanderlodgeForum] Re: ARO Step control valve

>

>

>

>

>

> We have step control valves

> Stephen 97 bmc 37

> dupree Procucts

>

> --- In "WanderlodgeForum%40yahoogroups.com"

> , "Chuck
Wheeler"

> wrote:

> >

> > We developed a bad leak in the ARO step control valve during our trip
last

> > weekend. The spool valve was easy to rebuild using "O"
rings from the

> > faucet section of ACE hardware (3/4" X 1/8" thick - $0.29
each). The

> problem

> > is that the rubber on the back port of one of the pilot air valves is
bad

> so

> > there is a leak when it is energized. There used to be kits available
for

> > these valves but I can't find any since IR bought ARO.

> >

> > - Has anyone found any parts to rebuild one of these valves lately?

> >

> > - Or does any one have an old valve around that I could buy for
parts?

> >

> > - Or, lastly, does anyone have a part number for a valve that would

> replace

> > the current one? (ARO Part#5840-2929-02)

> >

> >

> >

> > We head north for the holidays and in very cold weather even a small
leak

> > creates problems.

> >

> >

> >

> > - Chuck Wheeler-

> >

> > 1982 FC 31SB Fort Worth
TX


> >

>

Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)