Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FRONT LEVELER LEAKING
12-20-2011, 07:33
Post: #1
FRONT LEVELER LEAKING
Hello All
I have hydraulic oil leaking from leveler cylinder
dose anyone know where to get new seals
or even better I live in port charlotte florida anyone know where to get it
fixed any idea on the cost
I would greatly apprciat your input

jamiejbrandt@...
jamie brandt
1990 wb40
Quote this message in a reply
12-20-2011, 07:39
Post: #2
FRONT LEVELER LEAKING
Are the jacks the kick-down style? If they are, is it the kick-down cylinder (the smaller one) or the lift cylinder that is leaking. 

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA
"curtsprenger@gmail.com"
One of the "Birds of a Feather" (BoF) Organizers




On Tue, Dec 20, 2011 at 11:33 AM, Jamie <"jamiejbrandt@yahoo.com"> wrote:

 


Hello All

I have hydraulic oil leaking from leveler cylinder

dose anyone know where to get new seals

or even better I live in port charlotte florida anyone know where to get it fixed any idea on the cost

I would greatly apprciat your input



"jamiejbrandt%40yahoo.com"

jamie brandt

1990 wb40



Quote this message in a reply
12-20-2011, 09:44
Post: #3
FRONT LEVELER LEAKING
The 90 is fixed, not kick-down.

HWH has a list of dealers and service centers here:
http://www.hwhcorp.com/hwhdeal3.html

Don Bradner
90 PT40 "Blue Thunder"
My location: http://www.bbirdmaps.com/user2.cfm?user=1

On 12/20/2011 at 11:39 AM Curt Sprenger wrote:

>Are the jacks the kick-down style? If they are, is it the kick-down
>cylinder (the smaller one) or the lift cylinder that is leaking.
>
>Curt Sprenger
>1987 PT38 8V92 "MacAttack Racing"
>Anaheim Hills, CA
>curtsprenger@...
>One of the "Birds of a Feather" (BoF) Organizers
>
>
>On Tue, Dec 20, 2011 at 11:33 AM, Jamie wrote:
>
>> **
>>
>>
>> Hello All
>> I have hydraulic oil leaking from leveler cylinder
>> dose anyone know where to get new seals
>> or even better I live in port charlotte florida anyone know where to get
>> it fixed any idea on the cost
>> I would greatly apprciat your input
>>
>> jamiejbrandt@...
>> jamie brandt
>> 1990 wb40
>>
>>
>>
Quote this message in a reply
12-20-2011, 12:40
Post: #4
FRONT LEVELER LEAKING
I'm experiencing the same with my HWH levelers as Jamie. We have the same
model and year. Coincidentally, earlier today I stopped in at United RV in
Fort Worth to check on repair costs. I believe they are the only authorized
HWH service center in this part of Texas.

Labor cost per jack was estimated at $500, with any unusual circumstance and
parts extra. They also cautioned that the pistons of a 21-year-old coach
could easily be scored or pitted to the point that a new jack would be
required.

I'm not sure what average labor rates are but United gets $120, and for that
kind I think I'll pull mine off to save the R&R labor and just have them do
the rebuild. Either that or just plan a trip to Moscow, IA next summer.

Donn Barnes
90 WB-40 ³Howland²
Alvarado (Fort Worth), Texas

214/793-2043
donn@...


On 12/20/11 3:44 PM, "Don Bradner" wrote:

> The 90 is fixed, not kick-down.
>
> HWH has a list of dealers and service centers here:
> http://www.hwhcorp.com/hwhdeal3.html
>
> Don Bradner
> 90 PT40 "Blue Thunder"
> My location: http://www.bbirdmaps.com/user2.cfm?user=1
>
> On 12/20/2011 at 11:39 AM Curt Sprenger wrote:
>
>> Are the jacks the kick-down style? If they are, is it the kick-down
>> cylinder (the smaller one) or the lift cylinder that is leaking.
>>
>> Curt Sprenger
>> 1987 PT38 8V92 "MacAttack Racing"
>> Anaheim Hills, CA
>> curtsprenger@...
>> One of the "Birds of a Feather" (BoF) Organizers
>>
>>
>> On Tue, Dec 20, 2011 at 11:33 AM, Jamie wrote:
>>
>>> **
>>>
>>>
>>> Hello All
>>> I have hydraulic oil leaking from leveler cylinder
>>> dose anyone know where to get new seals
>>> or even better I live in port charlotte florida anyone know where to get
>>> it fixed any idea on the cost
>>> I would greatly apprciat your input
>>>
>>> jamiejbrandt@...
>>> jamie brandt
>>> 1990 wb40
>>>
>>>
>>>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
Quote this message in a reply
12-20-2011, 12:56
Post: #5
FRONT LEVELER LEAKING
What does HWH charge for a new jack? Help make the choice easier.
Gary
SOB

--- In WanderlodgeForum@yahoogroups.com, D E BARNES wrote:
>
> I'm experiencing the same with my HWH levelers as Jamie. We have the same
> model and year. Coincidentally, earlier today I stopped in at United RV in
> Fort Worth to check on repair costs. I believe they are the only authorized
> HWH service center in this part of Texas.
>
> Labor cost per jack was estimated at $500, with any unusual circumstance and
> parts extra. They also cautioned that the pistons of a 21-year-old coach
> could easily be scored or pitted to the point that a new jack would be
> required.
>
> I'm not sure what average labor rates are but United gets $120, and for that
> kind I think I'll pull mine off to save the R&R labor and just have them do
> the rebuild. Either that or just plan a trip to Moscow, IA next summer.
>
> Donn Barnes
> 90 WB-40 ³Howland²
> Alvarado (Fort Worth), Texas
>
> 214/793-2043
> donn@...
>
>
> On 12/20/11 3:44 PM, "Don Bradner" wrote:
>
> > The 90 is fixed, not kick-down.
> >
> > HWH has a list of dealers and service centers here:
> > http://www.hwhcorp.com/hwhdeal3.html
> >
> > Don Bradner
> > 90 PT40 "Blue Thunder"
> > My location: http://www.bbirdmaps.com/user2.cfm?user=1
> >
> > On 12/20/2011 at 11:39 AM Curt Sprenger wrote:
> >
> >> Are the jacks the kick-down style? If they are, is it the kick-down
> >> cylinder (the smaller one) or the lift cylinder that is leaking.
> >>
> >> Curt Sprenger
> >> 1987 PT38 8V92 "MacAttack Racing"
> >> Anaheim Hills, CA
> >> curtsprenger@...
> >> One of the "Birds of a Feather" (BoF) Organizers
> >>
> >>
> >> On Tue, Dec 20, 2011 at 11:33 AM, Jamie wrote:
> >>
> >>> **
> >>>
> >>>
> >>> Hello All
> >>> I have hydraulic oil leaking from leveler cylinder
> >>> dose anyone know where to get new seals
> >>> or even better I live in port charlotte florida anyone know where to get
> >>> it fixed any idea on the cost
> >>> I would greatly apprciat your input
> >>>
> >>> jamiejbrandt@...
> >>> jamie brandt
> >>> 1990 wb40
> >>>
> >>>
> >>>
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
Quote this message in a reply
12-20-2011, 13:05
Post: #6
FRONT LEVELER LEAKING
Something I should have mentioned before. HWH has a series of online
tutorials on understanding and servicing their equipment. This could be very
helpful if Jamie decides to do his own work.

http://www.hwhcorp.com/onlineschoolsect13pt1.html

Donn Barnes
90 WB-40 ³Howland²
Alvarado (Fort Worth), Texas

214/793-2043
donn@...
Quote this message in a reply
12-20-2011, 13:05
Post: #7
FRONT LEVELER LEAKING
I had my front actuator replaced at FMC rally in Madison- $175.00 A hydraulic shop could do the repairs cheaper.


Ernie Ekberg
88 PT40
817-475-3991

--- On Tue, 12/20/11, D E BARNES wrote:

From: D E BARNES
Subject: Re: [WanderlodgeForum] FRONT LEVELER LEAKING
To: WanderlodgeForum@yahoogroups.com
Date: Tuesday, December 20, 2011, 6:40 PM


I'm experiencing the same with my HWH levelers as Jamie. We have the same
model and year. Coincidentally, earlier today I stopped in at United RV in
Fort Worth to check on repair costs. I believe they are the only authorized
HWH service center in this part of Texas.

Labor cost per jack was estimated at $500, with any unusual circumstance and
parts extra. They also cautioned that the pistons of a 21-year-old coach
could easily be scored or pitted to the point that a new jack would be
required.

I'm not sure what average labor rates are but United gets $120, and for that
kind I think I'll pull mine off to save the R&R labor and just have them do
the rebuild. Either that or just plan a trip to Moscow, IA next summer.

Donn Barnes
90 WB-40 ³Howland²
Alvarado (Fort Worth), Texas

214/793-2043
donn@...

On 12/20/11 3:44 PM, "Don Bradner" <bluethunder@...> wrote:

> The 90 is fixed, not kick-down.
>
> HWH has a list of dealers and service centers here:
> http://www.hwhcorp.com/hwhdeal3.html
>
> Don Bradner
> 90 PT40 "Blue Thunder"
> My location: http://www.bbirdmaps.com/user2.cfm?user=1
>
> On 12/20/2011 at 11:39 AM Curt Sprenger wrote:
>
>> Are the jacks the kick-down style? If they are, is it the kick-down
>> cylinder (the smaller one) or the lift cylinder that is leaking.
>>
>> Curt Sprenger
>> 1987 PT38 8V92
"MacAttack Racing"
>> Anaheim Hills, CA
>> curtsprenger@...
>> One of the "Birds of a Feather" (BoF) Organizers
>>
>>
>> On Tue, Dec 20, 2011 at 11:33 AM, Jamie <jamiejbrandt@...> wrote:
>>
>>> **
>>>
>>>
>>> Hello All
>>> I have hydraulic oil leaking from leveler cylinder
>>> dose anyone know where to get new seals
>>> or even better I live in port charlotte florida anyone know where to get
>>> it fixed any idea on the cost
>>> I would greatly apprciat your
input
>>>
>>> jamiejbrandt@...
>>> jamie brandt
>>> 1990 wb40
>>>
>>>
>>>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Quote this message in a reply
12-20-2011, 13:09
Post: #8
FRONT LEVELER LEAKING
Gary, I've not been able to find that on their website. United RV told me
there are refurbished jacks available too, but I didn't get a price on that
either. Might be worth a phone call if someone is patient enough to wait for
the return call. I understand they understaffed and are backed up, and that
it sometimes takes days to get a return call.

Donn


On 12/20/11 6:56 PM, "Gary Smith" wrote:

> What does HWH charge for a new jack? Help make the choice easier.
> Gary
> SOB
>
> --- In WanderlodgeForum@yahoogroups.com, D E BARNES wrote:
>>
>> I'm experiencing the same with my HWH levelers as Jamie. We have the same
>> model and year. Coincidentally, earlier today I stopped in at United RV in
>> Fort Worth to check on repair costs. I believe they are the only authorized
>> HWH service center in this part of Texas.
>>
>> Labor cost per jack was estimated at $500, with any unusual circumstance and
>> parts extra. They also cautioned that the pistons of a 21-year-old coach
>> could easily be scored or pitted to the point that a new jack would be
>> required.
>>
>> I'm not sure what average labor rates are but United gets $120, and for that
>> kind I think I'll pull mine off to save the R&R labor and just have them do
>> the rebuild. Either that or just plan a trip to Moscow, IA next summer.
>>
>> Donn Barnes
>> 90 WB-40 ³Howland²
>> Alvarado (Fort Worth), Texas
>>
>> 214/793-2043
>> donn@...
>>
>>
>> On 12/20/11 3:44 PM, "Don Bradner" wrote:
>>
>>> The 90 is fixed, not kick-down.
>>>
>>> HWH has a list of dealers and service centers here:
>>> http://www.hwhcorp.com/hwhdeal3.html
>>>
>>> Don Bradner
>>> 90 PT40 "Blue Thunder"
>>> My location: http://www.bbirdmaps.com/user2.cfm?user=1
>>>
>>> On 12/20/2011 at 11:39 AM Curt Sprenger wrote:
>>>
>>>> Are the jacks the kick-down style? If they are, is it the kick-down
>>>> cylinder (the smaller one) or the lift cylinder that is leaking.
>>>>
>>>> Curt Sprenger
>>>> 1987 PT38 8V92 "MacAttack Racing"
>>>> Anaheim Hills, CA
>>>> curtsprenger@...
>>>> One of the "Birds of a Feather" (BoF) Organizers
>>>>
>>>>
>>>> On Tue, Dec 20, 2011 at 11:33 AM, Jamie wrote:
>>>>
>>>>> **
>>>>>
>>>>>
>>>>> Hello All
>>>>> I have hydraulic oil leaking from leveler cylinder
>>>>> dose anyone know where to get new seals
>>>>> or even better I live in port charlotte florida anyone know where to get
>>>>> it fixed any idea on the cost
>>>>> I would greatly apprciat your input
>>>>>
>>>>> jamiejbrandt@...
>>>>> jamie brandt
>>>>> 1990 wb40
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
Quote this message in a reply
12-22-2011, 16:13
Post: #9
FRONT LEVELER LEAKING

For what it is worth, I had one jack start leaking while we were in Nebraska two years ago.  A local outfit that repairs tractor hydraulics rebuilt the jack for me.  Parts were $19 and labor was $55.  No problems since.

Chuck Wheeler

1982 FC31 SB

Fort Worth, TX

From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of D E BARNES
Sent: Tuesday, December 20, 2011 7:09 PM
To: WanderlodgeForum@yahoogroups.com
Subject: Re: [WanderlodgeForum] Re: FRONT LEVELER LEAKING


Gary, I've not been able to find that on their website. United RV told me
there are refurbished jacks available too, but I didn't get a price on that
either. Might be worth a phone call if someone is patient enough to wait for
the return call. I understand they understaffed and are backed up, and that
it sometimes takes days to get a return call.

Donn

On 12/20/11 6:56 PM, "Gary Smith" <"trekker01%40gmail.com"> wrote:

> What does HWH charge for a new jack? Help make the choice easier.
> Gary
> SOB
>
> --- In "WanderlodgeForum%40yahoogroups.com", D E BARNES <"donn@..."> wrote:
>>
>> I'm experiencing the same with my HWH levelers as Jamie. We have the same
>> model and year. Coincidentally, earlier today I stopped in at United RV in
>> Fort Worth to check on repair costs. I believe they are the only authorized
>> HWH service center in this part of Texas.
>>
>> Labor cost per jack was estimated at $500, with any unusual circumstance and
>> parts extra. They also cautioned that the pistons of a 21-year-old coach
>> could easily be scored or pitted to the point that a new jack would be
>> required.
>>
>> I'm not sure what average labor rates are but United gets $120, and for that
>> kind I think I'll pull mine off to save the R&R labor and just have them do
>> the rebuild. Either that or just plan a trip to Moscow, IA next summer.
>>
>> Donn Barnes
>> 90 WB-40 ³Howland²
>> Alvarado (Fort Worth), Texas
>>
>> 214/793-2043
>> donn@...
>>
>>
>> On 12/20/11 3:44 PM, "Don Bradner" <"bluethunder@..."> wrote:
>>
>>> The 90 is fixed, not kick-down.
>>>
>>> HWH has a list of dealers and service centers here:
>>> http://www.hwhcorp.com/hwhdeal3.html
>>>
>>> Don Bradner
>>> 90 PT40 "Blue Thunder"
>>> My location: www.bbirdmaps.com/user2.cfm?user=1
>>>
>>> On 12/20/2011 at 11:39 AM Curt Sprenger wrote:
>>>
>>>> Are the jacks the kick-down style? If they are, is it the kick-down
>>>> cylinder (the smaller one) or the lift cylinder that is leaking.
>>>>
>>>> Curt Sprenger
>>>> 1987 PT38 8V92 "MacAttack Racing"
>>>> Anaheim Hills, CA
>>>> curtsprenger@...
>>>> One of the "Birds of a Feather" (BoF) Organizers
>>>>
>>>>
>>>> On Tue, Dec 20, 2011 at 11:33 AM, Jamie <"jamiejbrandt@..."> wrote:
>>>>
>>>>> **
>>>>>
>>>>>
>>>>> Hello All
>>>>> I have hydraulic oil leaking from leveler cylinder
>>>>> dose anyone know where to get new seals
>>>>> or even better I live in port charlotte florida anyone know where to get
>>>>> it fixed any idea on the cost
>>>>> I would greatly apprciat your input
>>>>>
>>>>> jamiejbrandt@...
>>>>> jamie brandt
>>>>> 1990 wb40
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)