Muffler Removal

[cmillsap]

(06-13-2013 19:24)davidmbrady Wrote:  Chuck,

That's right the perforated plate is slightly obscured by the corrugated walkway. I'd let them notch a section out of the walkway. They should be able to do that easily with an angle grinder or a skill saw with an cutting blade for aluminum.

While there in there have them grind off a sliver of the perforated plate so it's not rubbing up against your exhaust stack. :-)

That's what we're doing. Thanks again David.
What this "exercise" tells me, David, is that it probably is the original muffler that we're replacing. After 13 years, it needed to be done.