Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Back plates for dash switches
06-19-2013, 03:10
Post: #1
Back plates for dash switches
Does anyone know a source for the plates behind the dash switches on M450s? I need to replace a few that have the screw corners cracked or missing. A picture is below.


Attached File(s) Thumbnail(s)
İmage

Tommy "2 Shoes" McCarthy
2006 M450XLI "GoneAway" Big Grin
Former owner 1995 PT42 WB "Pretty Penny"
Gardnerville, NV
Near South Lake Tahoe
Find all posts by this user
Like Post Quote this message in a reply
06-19-2013, 11:37
Post: #2
RE: Back plates for dash switches
Tommy,

I think Ryan Saari has those pieces. I'll PM his email address.

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
06-19-2013, 22:34
Post: #3
RE: Back plates for dash switches
(06-19-2013 11:44)Bird Owner Wrote:  From WOG


Finally the complete M380/450 dash/switch panel sets are available!

The dash panel was the last to be manufactured and was a bit of a pain...

The new dash panel is now .25 thick verses .19 for the original. The smidge of extra thickness should help for strength and is completely interchangeable with the old dash with the color match being very close too!

Pricing is as follows:

$195.00 Dash panel.
$ 65.00 Radio/backup camera blank.
$162.50 Switch bezels, 8 pieces.
$422.50 total

As a complete package we will be discounting them through RATS for $375.00/10 piece set.

After RATS they will be $395.00/set or as individually priced above.

Sorry for the less than stellar pictures but they do work

Stephen@dupreeproducts.com

ryansaari@tampabay.rr.com




__________________


Got this from Stephen in response to my WOG post. Thanks.

Tommy "2 Shoes" McCarthy
2006 M450XLI "GoneAway" Big Grin
Former owner 1995 PT42 WB "Pretty Penny"
Gardnerville, NV
Near South Lake Tahoe
Find all posts by this user
Like Post Quote this message in a reply
06-19-2013, 23:54
Post: #4
RE: Back plates for dash switches
(06-19-2013 22:34)tcandt Wrote:  
(06-19-2013 11:44)Bird Owner Wrote:  From WOG


Finally the complete M380/450 dash/switch panel sets are available!

The dash panel was the last to be manufactured and was a bit of a pain...

The new dash panel is now .25 thick verses .19 for the original. The smidge of extra thickness should help for strength and is completely interchangeable with the old dash with the color match being very close too!

Pricing is as follows:

$195.00 Dash panel.
$ 65.00 Radio/backup camera blank.
$162.50 Switch bezels, 8 pieces.
$422.50 total

As a complete package we will be discounting them through RATS for $375.00/10 piece set.

After RATS they will be $395.00/set or as individually priced above.

Sorry for the less than stellar pictures but they do work

Stephen@dupreeproducts.com

ryansaari@tampabay.rr.com




__________________


Got this from Stephen in response to my WOG post. Thanks.

Another question.

My dash has black screws for the switches and brass screws for the camera/radio and instrument panel. Is that original or should they all be black or brass?

Tommy "2 Shoes" McCarthy
2006 M450XLI "GoneAway" Big Grin
Former owner 1995 PT42 WB "Pretty Penny"
Gardnerville, NV
Near South Lake Tahoe
Find all posts by this user
Like Post Quote this message in a reply
06-22-2013, 01:44
Post: #5
RE: Back plates for dash switches
(06-20-2013 11:24)Bird Owner Wrote:  Tommy,

The main gauge cluster and the radio panel have brass machine screws
İmage


and the switch panels have black self-tap screws.
İmage

That is what I have. Just needed. Information that this is standard. Thanks again, Rich.

Tommy "2 Shoes" McCarthy
2006 M450XLI "GoneAway" Big Grin
Former owner 1995 PT42 WB "Pretty Penny"
Gardnerville, NV
Near South Lake Tahoe
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)