LXi Parasitic Load

[gondolaguy]

(08-02-2013 13:19)davidmbrady Wrote:  That's right Corey, the older Xantrex RV3000 series don't have a specific AGM battery charging schedule so you'll have to set your chargers to Flooded Lead Acid. There are some slight differences in charging voltage set points but your AGM's will hardly notice:


Xantrex RV3012 Series
Battery; Bulk/Absorption: Max V, Max I; Float: Max V
FLA; 14.4V, 30%C; 13.5V
AGM; 14.3V, 30%C; 13.45V


Lifeline AGM GPL-4DL
Bulk Charge Voltages: 14.20 - 14.60
Absorbtion Charge Voltages: 14.20 - 14.60volts
Float Charge Voltages: 13.10 - 13.40
The GPL-4DL is designed for charging amperages up to 525 amps or 250% of the rated Amp Hour Capacity due to low battery internal resistance.

So, the top remote did allow for AGM and I set that one there, the bottom one now acts totally different (now that I set it as the slave). The top remote seems to control all functions and is the only one reading amperage.
Thanks, I think it's working as it should now.