Jacobs engine brake/ high idle - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Jacobs engine brake/ high idle (/showthread.php?tid=2130) |
Jacobs engine brake/ high idle - erniecarpet@... - 03-06-2006 22:40 David- thanks for thee hint. Will be researching the wiring in the next few hours. Ernie-83pt40 in louisiana [Non-text portions of this message have been removed] Jacobs engine brake/ high idle - erniecarpet@... - 03-07-2006 00:02 Thanks, George. I have the old 6v92 in my coach and will try and get a manual to read up on this. Ernie-83pt40 in louisiana [Non-text portions of this message have been removed] Jacobs engine brake/ high idle - Ernest Ekberg - 03-07-2006 01:23 I have an inoperative engine brake and high idle. Steve Gureasko and I took the push rod assembly apart and removed the 2 o-rings and reassembled it and put it back on the coach. No high idle.Has anyone troubleshot this system? Before I head back to Montana, the Jake brake is a must have. Thanks, Ernie Ekberg, 83pt40 in louisiana Jacobs engine brake/ high idle - David Brady - 03-07-2006 03:07 Earnie, this is just a stab in the dark, but on my coach the high idle only works when the emergency brake is engaged. Could there be a fault in the signal that the emergency brake sends to the high idle? David Brady '02 LXi, Smokey, Va Ernest Ekberg wrote: >I have an inoperative engine brake and high idle. Steve Gureasko and I >took the push rod assembly apart and removed the 2 o-rings and >reassembled it and put it back on the coach. No high idle.Has anyone >troubleshot this system? Before I head back to Montana, the Jake brake >is a must have. Thanks, Ernie Ekberg, 83pt40 in louisiana > > > > > > > >Yahoo! Groups Links > > > > > > > > > > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 Jacobs engine brake/ high idle - George Lowry - 03-07-2006 04:01 HI Ernie, Not sure which engine you have. If it is the Cat, I don't know diddley, but if it is a Detroit.... IF they used the standard Jacobs unit, it does three functions. The primary function is as a buffer screw which is designed to take the loping out of the engine at idle. Adjustment is critical. Book says to turn it in until there is an increase in rpm not to exceed 15 rpm. best done with an electronic digital tach. Second function is to activate the micro switch that activates the Jake brake. Purpose of this micro switch is to assure that the engine is in the idle position before activating the Jake. Again a critical setting. Last function is the high idle where a pneumatic cylinder pushes a rod inward to increase the governor setting giving you the high idle. All three of these functions are performed by the same push rod and, if not set correctly, one or more will not work. If you don't have the Jacobs manual for the Jake Brake, best get a copy of one for the proper method of setting it. I gave mine away with the coach so can't help other than memory, and you know how b ad that can get. Another way is to jumper the micro switch which will allow the Jake to operate without that protection. To be safe, you will have to turn it on and off manually from the driver's station. Not only an inconvenience, but it can be forgotten. You could do that as a test to see if the problem is at the micro switch. Hope this is of some help. George Lowry '06 Alpine Apex - Formerly '95 WBDA 4203 Spearfish, SD traveling to SOCAL. Ernest Ekberg wrote: > I have an inoperative engine brake and high idle. Steve Gureasko and I > took the push rod assembly apart and removed the 2 o-rings and > reassembled it and put it back on the coach. No high idle.Has anyone > troubleshot this system? Before I head back to Montana, the Jake brake > is a must have. Thanks, Ernie Ekberg, 83pt40 in louisiana > > > > > > > > Yahoo! Groups Links > > > > > > > > Jacobs engine brake/ high idle - Wilhelmus Schreurs - 03-07-2006 16:58 Hi Guys: Before you go to that length, does the gear selector have to be in gear? I think so. One should look for the obvious first. Bill George Lowry Not sure which engine you have. If it is the Cat, I don't know diddley, but if it is a Detroit.... IF they used the standard Jacobs unit, it does three functions. The primary function is as a buffer screw which is designed to take the loping out of the engine at idle. Adjustment is critical. Book says to turn it in until there is an increase in rpm not to exceed 15 rpm. best done with an electronic digital tach. Second function is to activate the micro switch that activates the Jake brake. Purpose of this micro switch is to assure that the engine is in the idle position before activating the Jake. Again a critical setting. Last function is the high idle where a pneumatic cylinder pushes a rod inward to increase the governor setting giving you the high idle. All three of these functions are performed by the same push rod and, if not set correctly, one or more will not work. If you don't have the Jacobs manual for the Jake Brake, best get a copy of one for the proper method of setting it. I gave mine away with the coach so can't help other than memory, and you know how b ad that can get. Another way is to jumper the micro switch which will allow the Jake to operate without that protection. To be safe, you will have to turn it on and off manually from the driver's station. Not only an inconvenience, but it can be forgotten. You could do that as a test to see if the problem is at the micro switch. Hope this is of some help. George Lowry '06 Alpine Apex - Formerly '95 WBDA 4203 Spearfish, SD traveling to SOCAL. Ernest Ekberg wrote: > I have an inoperative engine brake and high idle. Steve Gureasko and I > took the push rod assembly apart and removed the 2 o-rings and > reassembled it and put it back on the coach. No high idle.Has anyone > troubleshot this system? Before I head back to Montana, the Jake brake > is a must have. Thanks, Ernie Ekberg, 83pt40 in louisiana > > > > > > > > Yahoo! Groups Links > > > > > > > > SPONSORED LINKS Recreational vehicles Wanderlodge Automotive maintenance Recreational vehicle dealer Used recreational vehicles Automotive radiators --------------------------------- YAHOO! GROUPS LINKS Visit your group "WanderlodgeForum" on the web. To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- --------------------------------- Have a question? Yahoo! Canada Answers. Go to Yahoo! Canada Answers [Non-text portions of this message have been removed] |