+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Facet Fan Teardown. (/showthread.php?tid=2620)
Facet Fan Teardown. - jim matus - 05-16-2006 16:47
I am getting ready to dissassemble the Facet fan and pulley hub on my
Bird in order to replace all of the bearings. I am doing this as
preventive maint.as I understand these fans are made out of
unobtainimum. I don't want to damage any of the parts so would like to
know the proper order of teardown. Also are the bearings in the hub
packed like a wheel bearing or is there oil in the hub.
Jim Matus 1984 FC35SB Rescue CA
Facet Fan Teardown. - Mike Hohnstein - 05-17-2006 01:56
I got a couple of Horton air clutch situations if you run into big problems.
The pulley hub has facing tapered bearings like a front wheel spindle. I takes
about 4 oz. of oil to fill the cavity when reassembling. Use 80/90. End play
for the pulley hub is .001 to .010, torque the nut to 110 ft. lbs. If the
bearing races are in good shape, I would not bother changing the bearing
assemblies but DO change the seal.
Mike Hohnstein
Germantown, WI
83FC35
----- Original Message -----
From: jim matus
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, May 16, 2006 11:47 PM
Subject: [WanderlodgeForum] Facet Fan Teardown.
I am getting ready to dissassemble the Facet fan and pulley hub on my
Bird in order to replace all of the bearings. I am doing this as
preventive maint.as I understand these fans are made out of
unobtainimum. I don't want to damage any of the parts so would like to
know the proper order of teardown. Also are the bearings in the hub
packed like a wheel bearing or is there oil in the hub.
Jim Matus 1984 FC35SB Rescue CA
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "WanderlodgeForum" on the web.
b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]
Facet Fan Teardown. - Gregory OConnor - 05-17-2006 15:50
I dont have finess and confidence to do a rebuild. I just removed a
air fan clutch on my 94 Aeromax N14 and sent it out for a rebuild.
$180.00. The turn around time was two days
GregO'Connor
94pt40
Romoland Ca
--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> I got a couple of Horton air clutch situations if you run into big
problems. The pulley hub has facing tapered bearings like a front
wheel spindle. I takes about 4 oz. of oil to fill the cavity when
reassembling. Use 80/90. End play for the pulley hub is .001
to .010, torque the nut to 110 ft. lbs. If the bearing races are in
good shape, I would not bother changing the bearing assemblies but
DO change the seal.
> Mike Hohnstein
> Germantown, WI
> 83FC35
> ----- Original Message -----
> From: jim matus
> To: WanderlodgeForum@yahoogroups.com
> Sent: Tuesday, May 16, 2006 11:47 PM
> Subject: [WanderlodgeForum] Facet Fan Teardown.
>
>
> I am getting ready to dissassemble the Facet fan and pulley hub
on my
> Bird in order to replace all of the bearings. I am doing this as
> preventive maint.as I understand these fans are made out of
> unobtainimum. I don't want to damage any of the parts so would
like to
> know the proper order of teardown. Also are the bearings in the
hub
> packed like a wheel bearing or is there oil in the hub.
> Jim Matus 1984 FC35SB Rescue CA
>
>
>
>
>
>
> --------------------------------------------------------------------
----------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "WanderlodgeForum" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
> --------------------------------------------------------------------
----------
>
>
>
> [Non-text portions of this message have been removed]
>