+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Back-up camera (/showthread.php?tid=5114)
Back-up camera - Scott Forman - 06-09-2007 05:58
I posted earlier about my rear view camera working fine until the
generator was turned on, then going static on the screen. Agter a
little more research, I figured out it isn;t the generator.
The culprit is the "electronics master" switch that controls power the
the digital clocks, digitel, etc. When it is off, the camera works
fine, when it is on, it goes to static.
Ideas?
Scott Forman
86 PT38
Back-up camera - Leroy Eckert - 06-09-2007 08:31
I had a similar problem with my stereo radio on certain frequencies after I
installed my new camera systems and turned them on. Static taking the frequency
off line. I wrapped the power wires to the LCD's with aluminum tape and have not
seen the problem since. That doesn't mean it has cured it. So far so good.
Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL
----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, June 09, 2007 12:58 PM
Subject: [WanderlodgeForum] Back-up camera
I posted earlier about my rear view camera working fine until the
generator was turned on, then going static on the screen. Agter a
little more research, I figured out it isn;t the generator.
The culprit is the "electronics master" switch that controls power the
the digital clocks, digitel, etc. When it is off, the camera works
fine, when it is on, it goes to static.
Ideas?
Scott Forman
86 PT38
[Non-text portions of this message have been removed]