+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: 3208 Water Pump R&R (/showthread.php?tid=5408)
3208 Water Pump R&R - freewill2008 - 07-24-2007 06:11
With coolant running out from behind the pulley on the water pump
shaft, I suppose it is time to replace the pump. This is a 3208T 225HP.
Has anyone done this job?
Are there any "gotchas" that I should know about during the Remove and
Replace process?
Is my local Cat dealer as good as any other source for parts?
Are there any other "soft parts" I should order aside from the pump and
gaskets?
Thanks in advance for any tips and advice.
Bob Griesel '84 FC31 WLII WA
3208 Water Pump R&R - davidkerryedwards - 07-24-2007 09:25
Haven't done it but I did buy a spare water pump on Ebay. Looks like a pretty
standard
and normal procedure from the appearance of the pump.
Kerry
82 FC 35
Denver
--- In WanderlodgeForum@yahoogroups.com, "freewill2008"
>
> With coolant running out from behind the pulley on the water pump
> shaft, I suppose it is time to replace the pump. This is a 3208T 225HP.
>
> Has anyone done this job?
>
> Are there any "gotchas" that I should know about during the Remove and
> Replace process?
>
> Is my local Cat dealer as good as any other source for parts?
>
> Are there any other "soft parts" I should order aside from the pump and
> gaskets?
>
> Thanks in advance for any tips and advice.
>
> Bob Griesel '84 FC31 WLII WA
>