+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Tranmission Code (/showthread.php?tid=5710)
Tranmission Code - Howard O. Truitt - 09-23-2007 15:17
On my 86, 8V92, PT40 with the Allison HTB741, 4-speed transmission. I am getting
a code 1 light pause then 2 quick lights. I assume this is a Code 12. Can anyone
tell me what this code is.
Thanks,
Howard Truitt, Sowega
[Non-text portions of this message have been removed]
Tranmission Code - Scott Forman - 09-24-2007 10:58
Howard,
I recently had a transmission problem. I, too, got a code 12 when
the problem started. My trans tech told me that code 12 is
an "initial" code that comes with any problem, sort of like a
warning. There should then be another specific code that follows it.
Scott Forman
86 PT38
Memphis
--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
>
> On my 86, 8V92, PT40 with the Allison HTB741, 4-speed transmission.
I am getting a code 1 light pause then 2 quick lights. I assume this
is a Code 12. Can anyone tell me what this code is.
> Thanks,
> Howard Truitt, Sowega
>
> [Non-text portions of this message have been removed]
>
Tranmission Code - Howard O. Truitt - 09-24-2007 11:17
Scott,
I spent about 4 hrs searching for a code chart last night. Finally found one on
WOO site. It list diagnostic codes for
MT 600, HT 700, and CT700 series transmission. It says a code 12 is low lube
pressure/oil level.
Howard Truitt, Camilla, Ga. 86 PT40
"Knat Country"
----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, September 24, 2007 6:58 PM
Subject: [WanderlodgeForum] Re: Tranmission Code
Howard,
I recently had a transmission problem. I, too, got a code 12 when
the problem started. My trans tech told me that code 12 is
an "initial" code that comes with any problem, sort of like a
warning. There should then be another specific code that follows it.
Scott Forman
86 PT38
Memphis
--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
>
> On my 86, 8V92, PT40 with the Allison HTB741, 4-speed transmission.
I am getting a code 1 light pause then 2 quick lights. I assume this
is a Code 12. Can anyone tell me what this code is.
> Thanks,
> Howard Truitt, Sowega
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.28/1023 - Release Date: 9/22/2007
1:27 PM
[Non-text portions of this message have been removed]
Tranmission Code - Leroy Eckert - 09-24-2007 11:45
Howard,
My trans has two checks on the stick. Hot and cold and the fluid needs to be
balanced in between the lines so to speak.
Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL
Royale Conversion
----- Original Message -----
From: Howard O. Truitt
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, September 24, 2007 6:17 PM
Subject: Re: [WanderlodgeForum] Re: Tranmission Code
Scott,
I spent about 4 hrs searching for a code chart last night. Finally found one
on WOO site. It list diagnostic codes for
MT 600, HT 700, and CT700 series transmission. It says a code 12 is low lube
pressure/oil level.
Howard Truitt, Camilla, Ga. 86 PT40
"Knat Country"
----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, September 24, 2007 6:58 PM
Subject: [WanderlodgeForum] Re: Tranmission Code
Howard,
I recently had a transmission problem. I, too, got a code 12 when
the problem started. My trans tech told me that code 12 is
an "initial" code that comes with any problem, sort of like a
warning. There should then be another specific code that follows it.
Scott Forman
86 PT38
Memphis
--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
>
> On my 86, 8V92, PT40 with the Allison HTB741, 4-speed transmission.
I am getting a code 1 light pause then 2 quick lights. I assume this
is a Code 12. Can anyone tell me what this code is.
> Thanks,
> Howard Truitt, Sowega
>
> [Non-text portions of this message have been removed]
>
----------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.28/1023 - Release Date: 9/22/2007
1:27 PM
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Tranmission Code - Scott Forman - 09-24-2007 11:48
Well that makes sense, as I received the code shortly after a
retarder line ruptured and all the trans oil sprayed out.
Scott
--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
>
> Scott,
> I spent about 4 hrs searching for a code chart last night. Finally
found one on WOO site. It list diagnostic codes for
> MT 600, HT 700, and CT700 series transmission. It says a code 12 is
low lube pressure/oil level.
> Howard Truitt, Camilla, Ga. 86 PT40
> "Knat Country"
> ----- Original Message -----
> From: Scott Forman
> To: WanderlodgeForum@yahoogroups.com
> Sent: Monday, September 24, 2007 6:58 PM
> Subject: [WanderlodgeForum] Re: Tranmission Code
>
>
> Howard,
>
> I recently had a transmission problem. I, too, got a code 12 when
> the problem started. My trans tech told me that code 12 is
> an "initial" code that comes with any problem, sort of like a
> warning. There should then be another specific code that follows
it.
>
> Scott Forman
> 86 PT38
> Memphis
>
> --- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
>
> >
> > On my 86, 8V92, PT40 with the Allison HTB741, 4-speed
transmission.
> I am getting a code 1 light pause then 2 quick lights. I assume
this
> is a Code 12. Can anyone tell me what this code is.
> > Thanks,
> > Howard Truitt, Sowega
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> --------------------------------------------------------------------
----------
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.485 / Virus Database: 269.13.28/1023 - Release Date:
9/22/2007 1:27 PM
>
>
> [Non-text portions of this message have been removed]
>