+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Racor Vacuum Gauge (/showthread.php?tid=5736)
Racor Vacuum Gauge - dspithaler@... - 09-29-2007 10:31
Hi Guys Has anybody seen or used a vacuum gauge that goes on the
racor filter where the T handle is. It keep the highest reading that it goes to
while driving. I think that would be kind of good to be able to see that
when you stopped to take a break. It is supposed to keep you from changing
filters unnecessary. Mine in the top gauge cluster isn't working & in looking
for
a new one I found this one. I haven't got one yet & was wandering if any one
has used one.
Don
89 SP 36'
Butler, PA
************************************** See what's new at http://www.aol.com
[Non-text portions of this message have been removed]
Racor Vacuum Gauge - erniecarpet@... - 09-29-2007 20:28
Don, disconnect your vacuum line from your gauge. Harvey Lawrence once told
me to do that.
Ernie Ekberg
83PT40
Weatherford, Tx
************************************** See what's new at http://www.aol.com
[Non-text portions of this message have been removed]
Racor Vacuum Gauge - sfedeli3 - 09-29-2007 23:41
Hi Don,
I have one- works fine. Seem to recall getting it from some marine
supply place out west. Only drawback is that you need a wrench to
loosen it when you change filters. BB parts had the one for the dash.
Shane Fedeli
85PT40
Hershey, PA
--- In WanderlodgeForum@yahoogroups.com, dspithaler@... wrote:
>
> Hi Guys Has anybody seen or used a vacuum gauge that goes
on the
> racor filter where the T handle is. It keep the highest reading
that it goes to
> while driving. I think that would be kind of good to be able to
see that
> when you stopped to take a break. It is supposed to keep you from
changing
> filters unnecessary. Mine in the top gauge cluster isn't working &
in looking for
> a new one I found this one. I haven't got one yet & was wandering
if any one
> has used one.
> Don
> 89 SP 36'
> Butler, PA
>
>
>
> ************************************** See what's new at
http://www.aol.com
>
>
> [Non-text portions of this message have been removed]
>
Racor Vacuum Gauge - dspithaler@... - 09-30-2007 07:16
Ernie What do you do when you disconnect the line? I have mine off
before.
Don
89 SP 36'
Butler, PA
Don, disconnect your vacuum line from your gauge. Harvey Lawrence once told
me to do that.
Ernie Ekberg
83PT40
Weatherford, Tx
************************************** See what's new at http://www.aol.com
[Non-text portions of this message have been removed]
Racor Vacuum Gauge - dspithaler@... - 09-30-2007 07:21
Hi Shane I think I will get one to put on the Racor just to see when
the filter is ready to change. I have a West Marine not to far from me.
Don
89 SP 36'
Butler, PA
Hi Don,
I have one- works fine. Seem to recall getting it from some marine
supply place out west. Only drawback is that you need a wrench to
loosen it when you change filters. BB parts had the one for the dash.
Shane Fedeli
85PT40
Hershey, PA
************************************** See what's new at http://www.aol.com
[Non-text portions of this message have been removed]
Racor Vacuum Gauge - erniecarpet@... - 09-30-2007 07:57
Harvey told me to reconnect it. It somehow helped. But that was on my 35FC a
few years ago. Maybe it was a coincidence?
Ernie Ekberg
83PT40
Weatherford, Tx
************************************** See what's new at http://www.aol.com
[Non-text portions of this message have been removed]