Wanderlodge Gurus - The Member Funded Wanderlodge Forum
Replacing PT generator - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Replacing PT generator (/showthread.php?tid=5802)



Replacing PT generator - Scott Forman - 10-08-2007 04:48

Knock on wood, my original Yanmar/Kohler gen is working like a champ
and only has 1800 hrs, so I expect to get many more years of service
out of it. Just for the sake of discussion, though, has anyone
replaced their 80's PT generator, and what model did you use?

Scott Forman
86 PT38
Memphis


Replacing PT generator - Richard Hayden - 10-08-2007 06:10

Scott,
Mine had been replaced when I got it in 2005 with a Power Tech 8 kw in a sound
cabinet. Model CD8000, 35 Amps on each leg. Works fine. It has a Kabota 3
cyl. engine. The radiator is attached to the rear of the engine on the
slide-out, so no flat radiator in the left front under the driver.

Dick Hayden - '87 PT 38 - Lake Stevens, WA

----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 08, 2007 9:48 AM
Subject: [WanderlodgeForum] Replacing PT generator


Knock on wood, my original Yanmar/Kohler gen is working like a champ
and only has 1800 hrs, so I expect to get many more years of service
out of it. Just for the sake of discussion, though, has anyone
replaced their 80's PT generator, and what model did you use?

Scott Forman
86 PT38
Memphis





[Non-text portions of this message have been removed]


Replacing PT generator - Scott Forman - 10-08-2007 06:17

Can you run all 3 airs with the 8kw?


--- In WanderlodgeForum@yahoogroups.com, "Richard Hayden"
wrote:
>
> Scott,
> Mine had been replaced when I got it in 2005 with a Power Tech 8 kw
in a sound cabinet. Model CD8000, 35 Amps on each leg. Works
fine. It has a Kabota 3 cyl. engine. The radiator is attached to
the rear of the engine on the slide-out, so no flat radiator in the
left front under the driver.
>
> Dick Hayden - '87 PT 38 - Lake Stevens, WA
>
> ----- Original Message -----
> From: Scott Forman
> To:
WanderlodgeForum@yahoogroups.com om>
> Sent: Monday, October 08, 2007 9:48 AM
> Subject: [WanderlodgeForum] Replacing PT generator
>
>
> Knock on wood, my original Yanmar/Kohler gen is working like a
champ
> and only has 1800 hrs, so I expect to get many more years of
service
> out of it. Just for the sake of discussion, though, has anyone
> replaced their 80's PT generator, and what model did you use?
>
> Scott Forman
> 86 PT38
> Memphis
>
>
>
>
>
> [Non-text portions of this message have been removed]
>


Replacing PT generator - Richard Hayden - 10-08-2007 06:52

Scott,
Well, I've never had the need to do that. I suppose one could if nothing else
was on. Remember, 35 Amps per leg. I've run the front two and didn't worry
about anything else being on. The front 2 are on different legs. That was in
So. Cal & Yuma last October, but have never run all 3 A/C's at once.

Dick Hayden - '87 PT 38 - Lake Stevens, WA


----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 08, 2007 11:17 AM
Subject: [WanderlodgeForum] Re: Replacing PT generator


Can you run all 3 airs with the 8kw?

--- In
WanderlodgeForum@yahoogroups.com,
"Richard Hayden"
wrote:
>
> Scott,
> Mine had been replaced when I got it in 2005 with a Power Tech 8 kw
in a sound cabinet. Model CD8000, 35 Amps on each leg. Works
fine. It has a Kabota 3 cyl. engine. The radiator is attached to
the rear of the engine on the slide-out, so no flat radiator in the
left front under the driver.
>
> Dick Hayden - '87 PT 38 - Lake Stevens, WA
>
> ----- Original Message -----
> From: Scott Forman
> To:

WanderlodgeForum@yahoogroups.com :WanderlodgeForum@...
om>
> Sent: Monday, October 08, 2007 9:48 AM
> Subject: [WanderlodgeForum] Replacing PT generator
>
>
> Knock on wood, my original Yanmar/Kohler gen is working like a
champ
> and only has 1800 hrs, so I expect to get many more years of
service
> out of it. Just for the sake of discussion, though, has anyone
> replaced their 80's PT generator, and what model did you use?
>
> Scott Forman
> 86 PT38
> Memphis
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]


Replacing PT generator - bloomas - 10-08-2007 07:28

----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 08, 2007 11:48 AM
Subject: [WanderlodgeForum] Replacing PT generator
I replace mine with a 12Kw power teck.
Bob Loomas 1985 PT 36


Knock on wood, my original Yanmar/Kohler gen is working like a champ
and only has 1800 hrs, so I expect to get many more years of service
out of it. Just for the sake of discussion, though, has anyone
replaced their 80's PT generator, and what model did you use?

Scott Forman
86 PT38
Memphis





[Non-text portions of this message have been removed]


Replacing PT generator - Scott Forman - 10-08-2007 09:29

Bob,

Was it a direct replacement (i.e. no mods to coach)? Able to use
original controls/gauges? Is it substantially quieter?

Thanks

--- In WanderlodgeForum@yahoogroups.com, "bloomas"
wrote:
>
>
> ----- Original Message -----
> From: Scott Forman
> To: WanderlodgeForum@yahoogroups.com
> Sent: Monday, October 08, 2007 11:48 AM
> Subject: [WanderlodgeForum] Replacing PT generator
> I replace mine with a 12Kw power teck.
> Bob Loomas 1985 PT 36
>
>
> Knock on wood, my original Yanmar/Kohler gen is working like a
champ
> and only has 1800 hrs, so I expect to get many more years of
service
> out of it. Just for the sake of discussion, though, has anyone
> replaced their 80's PT generator, and what model did you use?
>
> Scott Forman
> 86 PT38
> Memphis
>
>
>
>
>
> [Non-text portions of this message have been removed]
>


Replacing PT generator - bloomas - 10-08-2007 10:28

----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 08, 2007 4:29 PM
Subject: [WanderlodgeForum] Re: Replacing PT generator
I was able to use everything.same gages and radiator.
and it is quieter.Know more slip ring and brushes
Bob Loomas 1985 PT 36



Bob,

Was it a direct replacement (i.e. no mods to coach)? Able to use
original controls/gauges? Is it substantially quieter?

Thanks

--- In WanderlodgeForum@yahoogroups.com, "bloomas"
wrote:
>
>
> ----- Original Message -----
> From: Scott Forman
> To: WanderlodgeForum@yahoogroups.com
> Sent: Monday, October 08, 2007 11:48 AM
> Subject: [WanderlodgeForum] Replacing PT generator
> I replace mine with a 12Kw power teck.
> Bob Loomas 1985 PT 36
>
>
> Knock on wood, my original Yanmar/Kohler gen is working like a
champ
> and only has 1800 hrs, so I expect to get many more years of
service
> out of it. Just for the sake of discussion, though, has anyone
> replaced their 80's PT generator, and what model did you use?
>
> Scott Forman
> 86 PT38
> Memphis
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]