Wanderlodge Gurus - The Member Funded Wanderlodge Forum
Lean fixed- That was EASY!!! - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Lean fixed- That was EASY!!! (/showthread.php?tid=7771)

Lean fixed- That was EASY!!! - Robin - 03-14-2009 09:45

LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I
had asked my mechanic to look at it along with some other stuff and it kind of
got overlooked, so I've been trying to ignore it expecting a big expense.
Finally, I did my homework by searching here, then slithered under the rear. I
adjusted the height valve in about 5 minutes. Surprisingly, the nut was not
frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?

Lean fixed- That was EASY!!! - Robin - 03-14-2009 09:46

--- In WanderlodgeForum@yahoogroups.com, "Robin" wrote:
>
> LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her.
I had asked my mechanic to look at it along with some other stuff and it kind of
got overlooked, so I've been trying to ignore it expecting a big expense.
Finally, I did my homework by searching here, then slithered under the rear. I
adjusted the height valve in about 5 minutes. Surprisingly, the nut was not
frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?
>
Forgot to say who I am
John Churchill
Sanibel, FL
1980 FC33 "LARGE MARGE"

Lean fixed- That was EASY!!! - Ernie Ekberg - 03-14-2009 11:02

" LARGE MARGE"-- classic!!!


Ernie Ekberg
83PT40
Wanderlodge
Weatherford, Tx

--- On Sat, 3/14/09, Robin wrote:

From: Robin
Subject: [WanderlodgeForum] Re: Lean fixed- That was EASY!!!
To: WanderlodgeForum@yahoogroups.com
Date: Saturday, March 14, 2009, 3:46 PM


--- In "WanderlodgeForum%40yahoogroups.com", "Robin" wrote:
>
> LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I had asked my mechanic to look at it along with some other stuff and it kind of got overlooked, so I've been trying to ignore it expecting a big expense. Finally, I did my homework by searching here, then slithered under the rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was not frozen. Now I'm inspired. Everything else will be that easy and gratifying also right?
>
Forgot to say who I am
John Churchill
Sanibel, FL
1980 FC33 "LARGE MARGE"



Lean fixed- That was EASY!!! - Robin - 03-14-2009 12:22

--- In WanderlodgeForum@yahoogroups.com, Ernie Ekberg wrote:
>
> " LARGE MARGE"-- classic!!!
>
>
> Ernie Ekberg
> 83PT40
> Wanderlodge
> Weatherford, Tx
> http://autos.groups.yahoo.com/group/erniesremodelingandrepair



She's named after the queen of our pack of chow dogs, Maggie, who is a full
figure gal. I just put some pictures up of her lounging at the beach.
http://groups.yahoo.com/group/WanderlodgeForum/photos/album/1599357468/pic/list

JAC


>
> --- On Sat, 3/14/09, Robin wrote:
>
> From: Robin
> Subject: [WanderlodgeForum] Re: Lean fixed- That was EASY!!!
> To: WanderlodgeForum@yahoogroups.com
> Date: Saturday, March 14, 2009, 3:46 PM
>
>
>
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Robin" wrote:
> >
> > LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got
her. I had asked my mechanic to look at it along with some other stuff and it
kind of got overlooked, so I've been trying to ignore it expecting a big
expense. Finally, I did my homework by searching here, then slithered under the
rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was
not frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?
> >
> Forgot to say who I am
> John Churchill
> Sanibel, FL
> 1980 FC33 "LARGE MARGE"
>

Lean fixed- That was EASY!!! - Jon - 03-14-2009 13:37

--- In WanderlodgeForum@yahoogroups.com, "Robin" wrote:
>
> LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I had asked my mechanic to look at it along with some other stuff and it kind of got overlooked, so I've been trying to ignore it expecting a big expense. Finally, I did my homework by searching here, then slithered under the rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was not frozen. Now I'm inspired. Everything else will be that easy and gratifying also right?







Which side does it lean too? I might suggest you either loose some weight or balance it out on the other side! I had that problem so I just left the wife home.İmage



Jipjob



Rebel Bird



Bremerton
>