Lean fixed- That was EASY!!!

[Robin]

LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I
had asked my mechanic to look at it along with some other stuff and it kind of
got overlooked, so I've been trying to ignore it expecting a big expense.
Finally, I did my homework by searching here, then slithered under the rear. I
adjusted the height valve in about 5 minutes. Surprisingly, the nut was not
frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?

[Robin]

--- In WanderlodgeForum@yahoogroups.com, "Robin" wrote:
>
> LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her.
I had asked my mechanic to look at it along with some other stuff and it kind of
got overlooked, so I've been trying to ignore it expecting a big expense.
Finally, I did my homework by searching here, then slithered under the rear. I
adjusted the height valve in about 5 minutes. Surprisingly, the nut was not
frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?
>
Forgot to say who I am
John Churchill
Sanibel, FL
1980 FC33 "LARGE MARGE"

[Ernie Ekberg]

" LARGE MARGE"-- classic!!! Ernie Ekberg 83PT40 Wanderlodge Weatherford, Tx http://autos.groups.yahoo.com/group/erni...gandrepair --- On Sat, 3/14/09, Robin wrote: From: Robin Subject: [WanderlodgeForum] Re: Lean fixed- That was EASY!!! To: WanderlodgeForum@yahoogroups.com Date: Saturday, March 14, 2009, 3:46 PM --- In "WanderlodgeForum%40yahoogroups.com", "Robin" wrote: > > LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I had asked my mechanic to look at it along with some other stuff and it kind of got overlooked, so I've been trying to ignore it expecting a big expense. Finally, I did my homework by searching here, then slithered under the rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was not frozen. Now I'm inspired. Everything else will be that easy and gratifying also right? > Forgot to say who I am John Churchill Sanibel, FL 1980 FC33 "LARGE MARGE"

[Robin]

--- In WanderlodgeForum@yahoogroups.com, Ernie Ekberg wrote:
>
> " LARGE MARGE"-- classic!!!
>
>
> Ernie Ekberg
> 83PT40
> Wanderlodge
> Weatherford, Tx
> http://autos.groups.yahoo.com/group/erni...gandrepair



She's named after the queen of our pack of chow dogs, Maggie, who is a full
figure gal. I just put some pictures up of her lounging at the beach.
http://groups.yahoo.com/group/Wanderlodg...8/pic/list

JAC


>
> --- On Sat, 3/14/09, Robin wrote:
>
> From: Robin
> Subject: [WanderlodgeForum] Re: Lean fixed- That was EASY!!!
> To: WanderlodgeForum@yahoogroups.com
> Date: Saturday, March 14, 2009, 3:46 PM
>
>
>
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Robin" wrote:
> >
> > LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got
her. I had asked my mechanic to look at it along with some other stuff and it
kind of got overlooked, so I've been trying to ignore it expecting a big
expense. Finally, I did my homework by searching here, then slithered under the
rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was
not frozen. Now I'm inspired. Everything else will be that easy and gratifying
also right?
> >
> Forgot to say who I am
> John Churchill
> Sanibel, FL
> 1980 FC33 "LARGE MARGE"
>

[Jon]

--- In WanderlodgeForum@yahoogroups.com, "Robin" wrote:
>
> LARGE MARGE, my 1980 FC33 has been leaning to the right ever since I got her. I had asked my mechanic to look at it along with some other stuff and it kind of got overlooked, so I've been trying to ignore it expecting a big expense. Finally, I did my homework by searching here, then slithered under the rear. I adjusted the height valve in about 5 minutes. Surprisingly, the nut was not frozen. Now I'm inspired. Everything else will be that easy and gratifying also right?

Which side does it lean too? I might suggest you either loose some weight or balance it out on the other side! I had that problem so I just left the wife home.

Jipjob

Rebel Bird

Bremerton
>