Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Microwave
11-01-2009, 07:23
Post: #21
Microwave
still trying had three responses mine different
tks bob

--- In WanderlodgeForum@yahoogroups.com, "nom_descono" wrote:
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "sc310c" <sc310c@> wrote:
> >
> > maybe a dumb question but how do you get the microwave out of a 87 fc 35
> > bob in ky feeling dumb as hell
>
>
>
> >
> I replaced the Microwave/convection oven in our '85 FC.
> It's a labor intensive chore that required the removal of all the stainless
steel around the oven. This removed you can see the rest of the screws to
complete the removal of the oven.
> I posted some pictures of this project.
>
> Good Luck
> Harold Prescott
> 1985 FC 35
>
Quote this message in a reply
08-20-2010, 03:18
Post: #22
Microwave
The microwave in my 90 SP36 suddenly decided to quit working.
The light comes on and the keypad lights up but there is no response
from any key input. Is there anything I can do short of replacement?

Chuck Harrison
90 SP36
Akron, Ohio
Quote this message in a reply
08-20-2010, 08:08
Post: #23
Microwave
All I know about Microwaves is that many people have pulled them out to check for a fuse and found this simple glass fuse was blown. Not sure if their units were completely dead electrically or if they had a light and keypad working but no functionality


On 20 August 2010 08:18, williamcharrison <"williamcharrison@yahoo.com"> wrote:
 


The microwave in my 90 SP36 suddenly decided to quit working.

The light comes on and the keypad lights up but there is no response

from any key input. Is there anything I can do short of replacement?



Chuck Harrison

90 SP36

Akron, Ohio





--
Rob, Sue and Joey Robinson
Quote this message in a reply
08-20-2010, 12:57
Post: #24
Microwave
Not sure what all is controlled by the fuse inside the unit, but I would try
replacing it first. It should be on top of the unit or behind the keypad.

R.E. (Ron) Marabito, Dallas. TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
wrote:
>
> The microwave in my 90 SP36 suddenly decided to quit working.
> The light comes on and the keypad lights up but there is no response
> from any key input. Is there anything I can do short of replacement?
>
> Chuck Harrison
> 90 SP36
> Akron, Ohio
>
Quote this message in a reply
08-20-2010, 22:30
Post: #25
Microwave
This fuse sometimes blows when the Magnatron tube is weak or defective.
There are replacement tubes if this is the problem and you want to stay Vintage.

Bill 88 FC Michigan

--- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
wrote:
>
>
> Not sure what all is controlled by the fuse inside the unit, but I would try
replacing it first. It should be on top of the unit or behind the keypad.
>
> R.E. (Ron) Marabito, Dallas. TX 92WB40
>
> --- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
wrote:
> >
> > The microwave in my 90 SP36 suddenly decided to quit working.
> > The light comes on and the keypad lights up but there is no response
> > from any key input. Is there anything I can do short of replacement?
> >
> > Chuck Harrison
> > 90 SP36
> > Akron, Ohio
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)