Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HWH levelers
08-23-2006, 12:55
Post: #1
HWH levelers
I am having a problem with my HWH levelers in my '78 FC. The left
front one will lift the coach fine, but slowly drops down. There is no
fluid leak, so I assume the valve is not holding properly. Can
individual valves be replaced in the 4 lever control module, or does
the entire module need to be rebuilt/replaced?

Gardner
78FC33
Quote this message in a reply
08-23-2006, 13:35
Post: #2
HWH levelers
HWH services the valve body as a unit.
MH
----- Original Message -----
From: Gardner Yeaw
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, August 23, 2006 7:55 PM
Subject: [WanderlodgeForum] HWH levelers


I am having a problem with my HWH levelers in my '78 FC. The left
front one will lift the coach fine, but slowly drops down. There is no
fluid leak, so I assume the valve is not holding properly. Can
individual valves be replaced in the 4 lever control module, or does
the entire module need to be rebuilt/replaced?

Gardner
78FC33





[Non-text portions of this message have been removed]
Quote this message in a reply
05-17-2008, 23:03
Post: #3
HWH levelers


If you are doing the work yourself....I just replaced one of my "Kick Down" cylinders (the small hydraulic cylinder on the side) a couple of months ago. HWH has a website, I e-mailed them and they had a technician call me. We chatted and I ordered a new cylinder. $230 ifI remember right. The do not offer repair parts. Itsounds as if that would not be an option for you if the cylinder broke in half. The new cylinder comes complete with O-rings and new interface parts. The new cylinder will include a spring and valve that your old one did not have. It installs in one of the crossover pieces. Ask them to includeextraO-rings asyou may need them when reinstalling.
Steve Anderson
79 FC 35
Poulsbo, Wa
In a message dated 5/18/2008 7:39:16 A.M. US Mountain Standard Time, share74@... writes:




Pete & Jan,
Call HWH, I had to replace mine as well on my 81 FC.
They will send you what you need! (800) 321-3494
Check out their website:
Stephen

On Sun, May 18, 2008 at 10:01 AM, racetrash <"racetrash@netzero.net"> wrote:



we are looking for info on the hwh levelers on our 83fc bird. on the
left front jack, the small cylinder snapped in two, more than likley
from hanging down a bit. any ideas where to get another one??
pete & jan








Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food.
Quote this message in a reply
05-18-2008, 02:01
Post: #4
HWH levelers
we are looking for info on the hwh levelers on our 83fc bird. on the
left front jack, the small cylinder snapped in two, more than likley
from hanging down a bit. any ideas where to get another one??
pete & jan
Quote this message in a reply
05-18-2008, 02:38
Post: #5
HWH levelers
Pete & Jan,
Call HWH, I had to replace mine as well on my 81 FC.
They will send you what you need! (800) 321-3494
Check out their website:
Stephen

On Sun, May 18, 2008 at 10:01 AM, racetrash <"racetrash@netzero.net"> wrote:



we are looking for info on the hwh levelers on our 83fc bird. on the
left front jack, the small cylinder snapped in two, more than likley
from hanging down a bit. any ideas where to get another one??
pete & jan


Quote this message in a reply
05-18-2008, 03:26
Post: #6
HWH levelers
I replaced an entire jack on my old FC with a rebuilt unit from HWH,
and I want to say I remember it not costing much more than the $230
mentioned here for the part, might just want to replace the whole
unit. It is an easy swap.

Scott Forman
86 PT38
Memphis

--- In WanderlodgeForum@yahoogroups.com, ebirder2000@... wrote:
>
> If you are doing the work yourself....I just replaced one of
my "Kick Down"
> cylinders (the small hydraulic cylinder on the side) a couple of
months ago.
> HWH has a website, I e-mailed them and they had a technician call
me. We
> chatted and I ordered a new cylinder. $230 if I remember right.
The do not offer
> repair parts. It sounds as if that would not be an option for you
if the
> cylinder broke in half. The new cylinder comes complete with O-
rings and new
> interface parts. The new cylinder will include a spring and valve
that your old
> one did not have. It installs in one of the crossover pieces. Ask
them to
> include extra O-rings as you may need them when reinstalling.
>
> Steve Anderson
> 79 FC 35
> Poulsbo, Wa
>
>
> In a message dated 5/18/2008 7:39:16 A.M. US Mountain Standard
Time,
> share74@... writes:
>
>
>
>
>
> Pete & Jan,
>
> Call HWH, I had to replace mine as well on my 81 FC.
>
> They will send you what you need! (800) 321-3494
> Check out their website:
> _http://www.hwhcorp.http_ (http://www.hwhcorp.com/)
>
>
> Stephen
>
>
> On Sun, May 18, 2008 at 10:01 AM, racetrash <_racetrash@..._
> (mailto:racetrash@...) > wrote:
>
>
>
>
>
> we are looking for info on the hwh levelers on our 83fc bird. on
the
> left front jack, the small cylinder snapped in two, more than
likley
> from hanging down a bit. any ideas where to get another one??
> pete & jan
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> **************Wondering what's for Dinner Tonight? Get new twists
on family
> favorites at AOL Food.
> (http://food.aol.com/dinner-tonight?NCID=...0000000001)
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)