Threaded Mode | Linear Mode

05-06-2005, 02:25

Thanks for all the help guys! I was informed last night by a member that the
numbers I found were probably mt coach #'s, not a safe combo. Since I'm on
the road now, I don't think I'll remove it or have it drilled so it will
have to sit there and just look cool for now. Thanks for all the advice!

Al

_____

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Kurt Achenbach
Sent: Friday, May 06, 2005 7:15 AM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: Safe Combo

Hello Al,

Just had my Safe serviced and reset.
The Combination is (usualy)

Left 4 turns to # ?
Right 3 turns to # ?
left 2 turns to # ?
Right 1 turn to STOP

Kurt
83FC35SB in NH

--- In WanderlodgeForum@yahoogroups.com, "Al here" wrote:
> I tried the message archieve but it wouldn't work for me, so I
thought I
> would try you guys.
>
>
>
> My safe combo has been changed from the original factory setting as
per 2
> different locksmiths. They would have drilled it but since I assume
it's
>
> empty and there are no replacement parts, I didn't see the point in
ruining
> a great safe. I was going to hid a new one somewhere until I found
these
>
> #'s under the couch seats covering the safe (shhhh, don't tell
anyone).
>
>
>
> 50 452
>
>
>
> Not really having used dial safes in the past I don't know the
proper order
> of spins and what direction to start turning. Anyone have any
advice?
>
>
>
> Al S.
>
> 1981 31' FC
>
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of sfedeli3
> Sent: Thursday, May 05, 2005 5:37 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: Headlight switch
>
>
>
> Hi Sid,
>
> I just replaced mine with one from Blue Bird. Was around $100 or
> so... like everything else. Brand was "ohmite". Was pretty easy to
> get to. New one works beautifully. Could not find a match at any
> auto parts stores, but did not try a "good" NAPA (the one here in
> Hershey is pretty sad) I can walk you throught the removal and
> installation if needed.
>
> Shane Fedeli
> 85PT40
> Hershey, PA
>
> --- In WanderlodgeForum@yahoogroups.com, "Sidney Breese"
> <ssbreese@a...> wrote:
> > Well, I think my switch has bit the dust. Some time ago I wrote
> that
> > the switch did not work in the parking position, but the headlight
> > came on, but the tail lights didn't. Someone suggested WD40 and
> that
> > worked for a while. Doesn't work this time. I have headlights,
> but
> > no marker or tailights. Does anyone know the brand or model of
the
> > switch. I went to a couple of parts stores and the said I needed
> to
> > bring the old one in and they would match it. Everything is
> working
> > fine and I am not thinking of night driving, so I hate to take the
> > dash apart to get at the switch. Hoping someone has a model
> number.
> > thanks.
> > Sid Breese
> > 85PT40
> > St. Joseph, MO
>
>
>
>
>
> _____
>
> Yahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> * To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
> subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/> Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]

_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

* To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.

[Non-text portions of this message have been removed]

05-06-2005, 02:33

my first thought would be to try it as 50 4 52, then maybe 50 45 2, or 50 45
20

good luck

Mark 80FC35 PA for awhile

pattypape wrote:
Hi AL,

My Safe needs six numbers in the combination to open.
You may be missing a digit.

Example is; 25 35 45

Bill 88 FC

--- In WanderlodgeForum@yahoogroups.com, "Al here" wrote:
> I tried the message archieve but it wouldn't work for me, so I
thought I
> would try you guys.
>
>
>
> My safe combo has been changed from the original factory setting as
per 2
> different locksmiths. They would have drilled it but since I assume
it's
>
> empty and there are no replacement parts, I didn't see the point in
ruining
> a great safe. I was going to hid a new one somewhere until I found
these
>
> #'s under the couch seats covering the safe (shhhh, don't tell
anyone).
>
>
>
> 50 452
>
>
>
> Not really having used dial safes in the past I don't know the
proper order
> of spins and what direction to start turning. Anyone have any
advice?
>
>
>
> Al S.
>
> 1981 31' FC
>
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of sfedeli3
> Sent: Thursday, May 05, 2005 5:37 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: Headlight switch
>
>
>
> Hi Sid,
>
> I just replaced mine with one from Blue Bird. Was around $100 or
> so... like everything else. Brand was "ohmite". Was pretty easy to
> get to. New one works beautifully. Could not find a match at any
> auto parts stores, but did not try a "good" NAPA (the one here in
> Hershey is pretty sad) I can walk you throught the removal and
> installation if needed.
>
> Shane Fedeli
> 85PT40
> Hershey, PA
>
> --- In WanderlodgeForum@yahoogroups.com, "Sidney Breese"
> <ssbreese@a...> wrote:
> > Well, I think my switch has bit the dust. Some time ago I wrote
> that
> > the switch did not work in the parking position, but the headlight
> > came on, but the tail lights didn't. Someone suggested WD40 and
> that
> > worked for a while. Doesn't work this time. I have headlights,
> but
> > no marker or tailights. Does anyone know the brand or model of
the
> > switch. I went to a couple of parts stores and the said I needed
> to
> > bring the old one in and they would match it. Everything is
> working
> > fine and I am not thinking of night driving, so I hate to take the
> > dash apart to get at the switch. Hoping someone has a model
> number.
> > thanks.
> > Sid Breese
> > 85PT40
> > St. Joseph, MO
>
>
>
>
>
> _____
>
> Yahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> * To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
> subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/> Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]

---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---------------------------------
Yahoo! Mail
Stay connected, organized, and protected. Take the tour

[Non-text portions of this message have been removed]

05-06-2005, 10:05

Opps! Sorry Hank, that you received a copy of my response.
I was responding to the subject: Safe Combo.
See attached postings, I think Al got the message.

Bill 88FC Michigan

--- In WanderlodgeForum@yahoogroups.com, hank robb
wrote:
> I'M NOT AL. CHECK YOUR SEND ADDRESS. HATE TO SEE AL
> MISS A MESSAAGE.
> SINCERELY,
> HANK HANNIGAN
> 90SP36
> SYDNEY AUSTRALIA FOR NOW
> --- pattypape wrote:
> > Hi AL,
> >
> > My Safe needs six numbers in the combination to
> > open.
> > You may be missing a digit.
> >
> > Example is; 25 35 45
> >
> > Bill 88 FC
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Al here"
> > wrote:
> > > I tried the message archieve but it wouldn't work
> > for me, so I
> > thought I
> > > would try you guys.
> > >
> > >
> > >
> > > My safe combo has been changed from the original
> > factory setting as
> > per 2
> > > different locksmiths. They would have drilled it
> > but since I assume
> > it's
> > >
> > > empty and there are no replacement parts, I didn't
> > see the point in
> > ruining
> > > a great safe. I was going to hid a new one
> > somewhere until I found
> > these
> > >
> > > #'s under the couch seats covering the safe
> > (shhhh, don't tell
> > anyone).
> > >
> > >
> > >
> > > 50 452
> > >
> > >
> > >
> > > Not really having used dial safes in the past I
> > don't know the
> > proper order
> > > of spins and what direction to start turning.
> > Anyone have any
> > advice?
> > >
> > >
> > >
> > > Al S.
> > >
> > > 1981 31' FC
> > >
> > >
> > >
> > > _____
> > >
> > > From: WanderlodgeForum@yahoogroups.com
> > > [mailto:WanderlodgeForum@yahoogroups.com] On
> > Behalf Of sfedeli3
> > > Sent: Thursday, May 05, 2005 5:37 PM
> > > To: WanderlodgeForum@yahoogroups.com
> > > Subject: [WanderlodgeForum] Re: Headlight switch
> > >
> > >
> > >
> > > Hi Sid,
> > >
> > > I just replaced mine with one from Blue Bird.
> > Was around $100 or
> > > so... like everything else. Brand was "ohmite".
> > Was pretty easy to
> > > get to. New one works beautifully. Could not find
> > a match at any
> > > auto parts stores, but did not try a "good" NAPA
> > (the one here in
> > > Hershey is pretty sad) I can walk you throught the
> > removal and
> > > installation if needed.
> > >
> > > Shane Fedeli
> > > 85PT40
> > > Hershey, PA
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "Sidney
> > Breese"
> > > <ssbreese@a...> wrote:
> > > > Well, I think my switch has bit the dust. Some
> > time ago I wrote
> > > that
> > > > the switch did not work in the parking position,
> > but the headlight
> > > > came on, but the tail lights didn't. Someone
> > suggested WD40 and
> > > that
> > > > worked for a while. Doesn't work this time. I
> > have headlights,
> > > but
> > > > no marker or tailights. Does anyone know the
> > brand or model of
> > the
> > > > switch. I went to a couple of parts stores and
> > the said I needed
> > > to
> > > > bring the old one in and they would match it.
> > Everything is
> > > working
> > > > fine and I am not thinking of night driving, so
> > I hate to take the
> > > > dash apart to get at the switch. Hoping someone
> > has a model
> > > number.
> > > > thanks.
> > > > Sid Breese
> > > > 85PT40
> > > > St. Joseph, MO
> > >
> > >
> > >
> > >
> > >
> > > _____
> > >
> > > Yahoo! Groups Links
> > >
> > > * To visit your group on the web, go to:
> > > http://groups.yahoo.com/group/WanderlodgeForum/
> > >
> > > * To unsubscribe from this group, send an email
> > to:
> > > WanderlodgeForum-unsubscribe@yahoogroups.com
> > >
> >
> > > subject=Unsubscribe>
> > >
> > > * Your use of Yahoo! Groups is subject to the
> > Yahoo!
> > > <http://docs.yahoo.com/info/terms/> Terms of
> > Service.
> > >
> > >
> > >
> > > [Non-text portions of this message have been
> > removed]
> >
> >
> >
>
>
>
> __________________________________
> Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
> http://promotions.yahoo.com/new_mail

05-07-2005, 10:09

why didn't you have the locksmith come to the BB????????

[Non-text portions of this message have been removed]

05-07-2005, 15:18

I did, two of them. The combo has been changed and there are no replacement
parts. So when they drilled the safe, it would have been destroyed. I think
it was Jeff that pointed out they could drill it from the side so it can
still be used. Didn't know that when they came by.

Al S.

_____

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of dwalks@...
Sent: Saturday, May 07, 2005 7:09 PM
To: WanderlodgeForum@yahoogroups.com
Subject: Re: [WanderlodgeForum] Re: Safe Combo

why didn't you have the locksmith come to the BB????????

[Non-text portions of this message have been removed]

_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

* To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

* Your use of Yahoo! Groups is subject to the Yahoo! Terms
<http://docs.yahoo.com/info/terms/> of Service.

[Non-text portions of this message have been removed]